Dome Camera Menus
VDC-250 / VDC-260 / VDC-240 / VDN-240 / VDI-240
en Quick Operation Guide
Advantage Line Dome Cameras
Camera menus | en
3
1
Camera menus
Press the center button of the control pad to access the SETUP
menu.
–
Use the up and down buttons to move the cursor to a
submenu
–
–
Use the right and left buttons to change values.
Press the center button to select an item (or exit).
1.1
Main menu
LENS
WHITE BAL
AGC
DAY/NIGHT
IMAGE ADJ
GENERAL
INITIAL*
EXIT
* If menu is changed, INITIAL is hidden.
Bosch Security Systems
Quick Operation Manual
AM18-Q0627 | v1.0 | 2012.06
4
en | Camera menus
Advantage Line Dome Cameras
1.1.1
Lens menu
ESC
BRIGHTNESS
FLICKERLESS
DC LEVEL
0~20
ON, OFF
0~20
DC
FLICKERLESS
SHUTTER*
ON, OFF
1/60 (50), 1/120
LENS
(100), 1/250, 1/500,
1/700, 1/1K1/1600,
1/2500, 1/5K, 1/7K,
1/10K, 1/30K, 1/60K,
1/120K (sec)
* Flickerless mode must be off to select the shutter speed.
IR camera
LENS
DC
DC LEVEL
SHUTTER
0~5
IR mode: 1/60 (50)
Color, B/W mode:
1/60 (50), 1/120
(100), 1/250, 1/500,
1/700, 1/1K1/1600,
1/2500, 1/5K, 1/7K,
1/10K, 1/30K, 1/60K,
1/120K (sec)
AM18-Q0627 | v1.0 | 2012.06
Quick Operation Manual
Bosch Security Systems
Advantage Line Dome Cameras
Camera menus | en
5
1.1.2
White balance menu
WHITE
BAL
ATW
MANUAL RED
BLUE
0~160
0~160
PUSH*
* Select PUSH to change the color temperature.
Bosch Security Systems
Quick Operation Manual
AM18-Q0627 | v1.0 | 2012.06
6
en | Camera menus
Advantage Line Dome Cameras
1.1.3
AGC (Automatic Gain Control) menu
AGC
ON
LEVEL
0~20
OFF
AM18-Q0627 | v1.0 | 2012.06
Quick Operation Manual
Bosch Security Systems
Advantage Line Dome Cameras
Camera menus | en
7
1.1.4
Day/night menu
DAY/
COLOR
B/W
NIGHT
BURST
OFF, ON
AUTO*
DELAY TIME
D/N LEVEL
1-15
LOW, MIDDLE, HIGH
*In auto mode using external IR may cause flicker.
The approximate levels for day/night switching are:
Low
0.15 lx
1.0 lx
Middle
0.3 lx
1.8 lx
High
0.6 lx
2.5 lx
VDC-250/260
VDC-240
Day to night
Night to day
Day to night
Night to day
0.5 lx
2.0 lx
1.0 lx
2.5 lx
1.5 lx
3.0 lx
VDN-240
Day to night
Night to day
0.2 lx
1.0 lx
0.5 lx
1.8 lx
0.10 lx
2.5 lx
IR camera
DAY/
IRED
MODE
WIDE*, SMART**
NIGHT
CHANGE LEVEL
LOW, MIDDLE, HIGH
COLOR
B/W
BURST
OFF, ON
* WIDE: controls IR LEDs based on full screen (may cause
saturation).
** SMART: controls IR LEDs based on brightess portion of
image (avoids sauration but image may be darker).
Bosch Security Systems
Quick Operation Manual
AM18-Q0627 | v1.0 | 2012.06
8
en | Camera menus
Advantage Line Dome Cameras
1.1.5
Image adjustment menu
SBLC
OFF, LOW, MIDDLE, HIGH
OFF, LOW, MIDDLE, HIGH
0~20
DNR
SHARP. LEVEL
MIRROR ON, OFF
MOTION AREA
DISPLAY
1-4
OFF, ON
1(most)-24 (least)
8-126
SENSITIVITY
TOP
BOTTOM
LEFT
8-126
4-191
RIGHT
4-191
INITIAL
OFF, ON
RETURN
PRIVACY AREA
IMAGE
ADJ
1-4
DISPLAY
COLOR
OFF, ON
WHITE, YELLOW, GREEN,
BLUE, RED BLACK, GRAY
TOP
4-63
BOTTOM
LEFT
5-64
18-205
19-206
OFF, ON
RIGHT
INITIAL
(factory
default)
RETURN
COLOR R-Y
0-20
GAIN
B-Y
0-20
GAMMA*
INITIAL
0.35, 0.45, 0.6, 0.75
OFF, ON
RETURN
* No Gamma for IR camera.
AM18-Q0627 | v1.0 | 2012.06
Quick Operation Manual
Bosch Security Systems
Advantage Line Dome Cameras
Camera menus | en
9
Area selection for motion or privacy masks
Select area 1, 2, 3 or 4.
–
Top: extend or reduce the upper limit of the detection
area.
–
Bottom: extend or reduce the bottom limit of the detection
area.
–
–
Left: extend or reduce the left limit of the detection area.
Right: extend or reduce the right limit of the detection
area.
TOP
reduce RIGHT
extend
LEFT
RIGHT
1
1
BOTTOM
Bosch Security Systems
Quick Operation Manual
AM18-Q0627 | v1.0 | 2012.06
10 en | Camera menus
Advantage Line Dome Cameras
1.1.6
General menu
CAM ID
000~255
OFF, ON
ID DISPLAY
CAM TITLE OFF
ON
UP/DN*, LE/RI**
ENG, CHIN
LANG.
SYNC.
(24 VAC
only)
INT, L/L
L/L phase adjust
0~356
GENERAL
BAUD.
2400, 4800, 9600,
57600
VERSION
INITIAL
(factory
default)
OFF, ON
RETURN
* up/down: character select.
** left/right: position select.
AM18-Q0627 | v1.0 | 2012.06
Quick Operation Manual
Bosch Security Systems
|