User Installation and Assembly Instructions
All Weather Design Speakers
• Weatherproof high power two-way speaker systems.
• Speaker systems feature high impact plastic
housings and aluminum grilles.
• Speakers include aluminum mounting brackets
Installation
A. Recommended wiring: 18 gauge copper wire (or heavier)
B. Ensure that the speakers are installed on a surface sturdy enough
to support their weight. Fasten properly & securely.
C. Take into account the targeted listening area and potential safety
hazards when choosing speaker installation and location.
D. Speco Technologies assumes no liability for misinstalled speakers.
E. Refer to below illustrations for assembly and installation instruction.
Vertical Installation
Horizontal Installation
AWD Outdoor Speakers Specifications
SP-5AWD
SP-5AWD/T
SP-6AWD
SP-6AWD/T
Model
SP-5AWD-W
SP-5AWD/T-W
SP-6AWD-W
SP-6AWD/T-W
Woofer
5.25" Polypropylene Coated
Rubber Surround
5.25" Polypropylene Coated
Rubber Surround
6.5" Mica Coated
Rubber Surround
6.5" Mica Coated
Rubber Surround
Tweeter
1/2" PEI Tweeter
60Hz-20kHz
88 db 1w/1m
40 Watt
1/2" PEI Tweeter
60Hz-20kHz
88 db 1w/1m
40 Watt
1" Mylar Tweeter
54Hz-20kHz
89dB 1w/1m
50 Watt
1" Mylar Tweeter
54Hz-20kHz
Frequency
SPL
89dB 1w/1m
50 Watt
RMS Wattage
Max Wattage
Impedance
Transformer
80 Watt
80 Watt
100 Watt
100 Watt
8 ohms
8 ohms
8 ohms
8 ohms
70V/25V (30W/ 15W/ 7.5W/ 3.75W)
70V/25V (30W/ 15W/ 7.5W/ 3.75W)
For more information regarding service or return, contact:
Speco Technologies 200 New Highway, Amityville, New York 11701 • Toll Free: 1-800-645-5516 • 631 957-8700
|