’
User s Manual
(English Edition)
Intel Pentium 4
Socket 478 CPU
AMD Athlon/
Duron/Athlon XP
Socket 462 CPU
AMD Athlon 64
Socket 754 CPU
ZM-WB2 Gold
* Please read before installation
nload from Www.Somanuals.com. All Mhattnpu://awwlswS.zaelmaarcnuhsaA.cnomd Down
3. Exploded View
1) Exploded view of CPU block
⑬
①
a Block base
①
①
⑬
b Block cover
Fittings
b
a
①
②
2) Exploded view for CPU type using ZM-WB2 Gold
②
④
④
②
④
①
①
①
⑦
⑪
⑩
⑧
⑥
⑨
⑫
⑩
⑨
Intel Pentium 4
Socket 478 CPU
AMD Athlon 64
Socket 754 CPU
AMD Athlon/
Duron/Athlon XP
Socket 462 CPU
nload from Www.Somanuals.com. All Manuals Search And Down
* The specifications of any product may change without prior notice to improve the performance thereof.
2
4. Components
1) Common Components
CPU block - 1 pc.
Hand screw - 2 pcs.
Thermal grease - 1 pc.
Clip - 1 pc.
①
②
③
④
⑤
⑬
①
②
⑬
⑤
User’s manual
Fittings - 6 pcs. (3 sets)
③
④
2) Components for Intel Pentium 4 (Socket 478)
Two (2) Clip Supports for Socket 478
⑥
⑥
3) Components for AMD Athlon / Athlon XP (Socket 462)
One (1) A -Type(blue) Clip Support for AMD Socket 462
One (1) B -Type(white) Clip Support for AMD Socket 462
Four Bolts - For Fastening Clip Supports
One Set of Washers
⑦
⑧
⑨
⑩
⑦
⑧
⑨
⑩
4) Components for AMD Athlon 64 (Socket 754)
Two Nipples
⑪
⑫
One Backplate
⑪
⑫
nload from Www.Somanuals.com. All Manuals Search And Down
* The specifications of any product may change without prior notice to improve the performance thereof.
3
5. Compatible CPU Types
1) Intel Pentium 4 - Socket 478
All speeds of Pentium 4 Socket 478 CPUs
Caution
As shown in Figure 2, a mainboard that is not compliant with the “10.2 mm mainboard
component height restriction” standard, introduced by Intel, may create interference between
components and the clip. Please do not install the ZM-WB2 when this interference is observed.
10.2mm Motherboard component height restriction
Clip
Mainboard
component
Top
ViewTop
Clip
View
Mainboard
component
Side
ViewSide
View
Figure 1 (O)
Figure 2 (X)
Clip
2) AMD Athlon/Duron/Athlon XP - Socket 462
All speeds of AMD Socket 462 CPUs
②
Caution
①
This product requires "Heatsink Attach Holes" around
CPU Socket as shown on the right.
②
This product can not be installed if any Motherboard
component(capacitor) taller than 1.5cm is located
under the clip.
①
Heat sink attach holes
3) AMD Athlon 64 - Socket 754
All speeds of AMD Socket 754 CPUs
nload from Www.Somanuals.com. All Manuals Search And Down
* The specifications of any product may change without prior notice to improve the performance thereof.
4
6. Cautions During Installation
1) Keep this product away from children.
2) Zalman Tech. Co., Ltd. is not responsible for any problems arising from using the product outside its
intended purpose..
3) The exposed core of a Socket 462 CPU can be damaged if proper care is not taken. Read the
“Installation” section thoroughly before installing.
4) Please do not install this product if ZM-WB2 interferes with any mainboard components.
5) Zalman Tech. Co., Ltd. is not responsible for any problems arising from using the ZM-WB2.
7. Installation (INTEL Pentium 4, Socket 478)
CPU
1) Apply Thermal Grease
Spread thermal grease thinly and evenly
over the CPU core (IHS).
Thermal Grease
Clip Support
Retention Guide
2) Install Clip Support
Install the two clip supports at both sides of
the retention guide as shown on the right.
ꢀ
ꢂ
ꢁ
nload from Www.Somanuals.com. All Manuals Search And Down
* The specifications of any product may change without prior notice to improve the performance thereof.
5
3) Insert Hand screws
Insert hand screws into the inner holes on the clip.
Hand screw
Outer hole
Clip
Inner hole
4) Fasten Hand screws
Place the CPU block on the center of the CPU.
Screw in both Hand screws in an alternating
fashion until they are completely tightened.
Clip
8. Installation-AMD XP/Duron, Socket 462
1) Install Clip spport
Install the socket 462 clip supports
as shown on the right.
B-Type Clip Support (White)
A-Type Clip Support (Blue)
Be sure to install A -Type clip
support (Blue) next to the lever.
Paper
washer
Lever
Mainboard
Paper washer
Bolts
B-Type Clip Support (White)
nload from Www.Somanuals.com. All Manuals Search And Down
* The specifications of any product may change without prior notice to improve the performance thereof.
6
CPU
2) Apply Thermal Grease
Spread thermal grease thinly and evenly over the CPU.
Thermal Grease
3) Insert Hand screws
Insert hand screws into the outer holes on the clip.
4) Fasten Hand screws
Clip
Outer hole
Place the CPU block on the center of the CPU.
Screw in both hand screws in an alternating
fashion until they are completely tightened.
A-Type
Clip Support
Inner hole
B-Type Clip Support
9. Installation-AMD XP/Duron, Socket 462
1) Fasten Nipples
Position the backplate on the bottom of the
Nipple
Main board
mainboard under the CPU socket, then
fasten the nipples as shown on the right.
Large Hole
Washer
* When installing the ZM-WB2 on an Athlon
64, the retention frame is not needed.
Backplate
nload from Www.Somanuals.com. All Manuals Search And Down
* The specifications of any product may change without prior notice to improve the performance thereof.
7
CPU
2) Apply Thermal Grease
Spread thermal grease thinly and evenly over the CPU.
3) Insert Hand screws
Insert hand screws into the outer holes on the clip.
Thermal Grease
4) Fasten Hand screws
Place the CPU block on the center of the
CPU. Partially screw the bolts into the nipples.
Then, screw both bolts down further in an
alternating fashion until they are completely
tightened.
Hand screw
Clip
Inner hole
Outer hole
10. Build a noiseless system
Creating a Complete Noiseless System
Use the following Zalman products to achieve stable and silent operation of your computer, Noiseless
Power Supply, Fanless Coolers for Northbridge Chipset & Video Card, and Noiseless Fan.
Power supply
ZM400A-APF
Northbridge Cooler
ZM-NB47J
Noiseless fan
VGA Cooler
ZM80C-HP
HDD Cooler
ZM-2HC1
nload from Www.Somanuals.com. All Manuals Search And Down
* The specifications of any product may change without prior notice to improve the performance thereof.
8
|