Model No. WEBE09010
Serial No.
Write the serial number in the
space above for reference.
USER’S MANUAL
Serial Number Decal (under seat)
QUESTIONS?
As a manufacturer, we are com-
mitted to providing complete
customer satisfaction. If you
have questions, or if there are
missing parts, we will guarantee
complete satisfaction through
direct assistance from our factory.
TO AVOID UNNECESSARY
DELAYS, PLEASE CALL DIRECT
TO OUR TOLL-FREE CUSTOMER
HOT LINE. The trained techni-
cians on our customer hot line
will provide immediate assis-
tance, free of charge to you.
CUSTOMER HOT LINE:
1-800-999-3756
Mon.–Fri., 6 a.m.–6 p.m. MST
Patent Pending
CAUTION
Visit our website at
Read all precautions and instruc-
tions in this manual before
using this equipment. Save this
manual for future reference.
new products, prizes,
fitness tips, and much more!
IMPORTANT PRECAUTIONS
WARNING:
To reduce the risk of serious injury, read the following important precautions
before using the weight bench.
1. Read all instructions in this manual before
using the weight bench. Use the weight
bench only as described in this manual.
7. Keep children under 12 and pets away from
the weight bench at all times.
8. Always wear athletic shoes for foot protec-
tion while exercising.
2. It is the responsibility of the owner to ensure
that all users of the weight bench are ade-
quately informed of all precautions.
9. Always make sure the backrest adjustment
knob is fully inserted through the backrest
bracket before using the weight bench.
3. The weight bench is intended for home use
only. Do not use the weight bench in any
commercial, rental, or institutional setting.
10. The weight bench is designed to support a
maximum of 550 pounds, including the user
and weights. Do not place more than 150
pounds on the leg lever for normal use. Note:
The weight bench does not include weights.
4. Use the weight bench only on a level surface.
Cover the floor beneath the weight bench to
protect the floor.
5. Make sure that all parts are properly tight-
ened each time you use the weight bench.
Replace any worn parts immediately.
11. If you feel pain or dizziness at any time while
exercising, stop immediately and begin cool-
ing down.
6. Keep hands and feet away from moving parts.
WARNING:
Before beginning this or any exercise program, consult your physician. This
is especially important for persons over the age of 35 or persons with pre-existing health problems.
Read all instructions before using. ICON assumes no responsibility for personal injury or property
damage sustained by or through the use of this product.
3
BEFORE YOU BEGIN
Thank you for selecting the versatile WEIDER® PRO
XT10 weight bench. The WEIDER® PRO XT10 is
designed to help you develop every major muscle
group of the body. Whether your goal is a shapely fig-
ure, dramatic increase in muscle size and strength, or
a healthier cardiovascular system, the WEIDER® PRO
XT10 will help you achieve the specific results you
want.
Service Department toll-free at 1-800-999-3756,
Monday through Friday, 6 a.m. until 6 p.m. Mountain
Time (excluding holidays). To help us assist you,
please note the product model number and serial
number before calling. The model number is
WEBE09010. The serial number can be found on a
decal attached to the weight bench (see the front
cover of this manual).
For your benefit, read this manual carefully before
using the WEIDER® PRO XT10 weight bench. If you
have additional questions, please call our Customer
Before reading further, please review the drawing
below and familiarize yourself with the parts that are
labeled.
Backrest
Seat
Backrest Bracket
Bench Frame
Leg Lever
Weight Tube
Backrest Adjustment Knob
Seat Bracket
4
PART IDENTIFICATION CHART
Refer to the drawings below to identify small parts used in assembly. The number in parentheses by each draw-
ing is the key number of the part, from the PART LIST on page 14 of this manual. Note: Some small parts may
have been pre-attached. If a part is not in the parts bag, check to see if it has been pre-attached.
M6 x 50mm Bolt (23)
M10 Nylon Locknut (33)
M10 Washer (32)
M8 x 55mm Carriage Bolt (24)
M10 x 65mm Bolt (31)
M8 Nylon Locknut (25)
M6 Washer (34)
M10 x 75mm Bolt (27)
M10 x 78mm Bolt (29)
M10 x 100mm Bolt (30)
M10 x 140mm Bolt (35)
M6 x 16mm Bolt (26)
12.5mm Spacer (15)
5
ASSEMBLY
• Place all parts in a cleared area and remove the
packing materials. Do not dispose of the packing
materials until assembly is completed.
Make Things Easier for Yourself
This manual is designed to ensure that the
weight bench can be assembled successfully
by anyone. Most people find that by setting
aside plenty of time, assembly will go smoothly.
The following tools (not included) are required
for assembly:
• Two adjustable wrenches
• One rubber mallet
Before beginning assembly, carefully read the
following information and instructions:
• One standard screwdriver
• Assembly requires two people.
• One Phillips screwdriver
• For help identifying small parts, use the PART
IDENTIFICATION CHART on page 5.
• Lubricant, such as grease or petroleum jelly,
and soapy water.
• Tighten all parts as you assemble them, unless
instructed to do otherwise.
Assembly will be more convenient if you have a
socket set, a set of open-end or closed-end
wrenches, or a set of ratchet wrenches.
• As you assemble the weight bench, make sure all
parts are oriented as shown in the drawings.
1. Before beginning assembly, make sure you
understand the information in the box above.
Important: Some of the parts described in the
assembly steps may be pre-assembled.
1
21
Press a 50mm Square Outer Cap (22) onto each
end of the Front Stabilizer (2). Press a 50mm x
75mm Inner Cap (21) into the Bench Frame (1).
1
33
2
Attach the Front Stabilizer (2) to the Bench Frame
(1) with two M10 x 65mm Bolts (31), two M10
Washers (32), and two M10 Nylon Locknuts (33).
32
31
32
22
22
2. Press a 50mm Square Outer Cap (22) onto each
end of the Rear Stabilizer (3).
2
1
Attach the Rear Stabilizer (3) to the Bench Frame
(1) with two M10 x 65mm Bolts (31), two M10
Washers (32), and two M10 Nylon Locknuts (33).
31
32
32
22
3
22
33
6
3. Press a 40mm x 50mm Inner Cap (20) into the
indicated end of the Seat Frame (5). Press 8mm
Bushings (14) into the indicated holes in the Seat
Frame and the Bench Frame (1).
3
14
5
20
14
7
Attach the Leg Lever Bracket (7) to the Seat Frame
(5) with the M10 x 45mm Adjustment Knob (28).
28
27
30
33
6
Attach the Seat Bracket (6) to the Seat Frame (5)
with the M10 x 75mm Bolt (27) and an M10 Nylon
Locknut (33).
14
1
Attach the Seat Bracket (6) to the Bench Frame (1)
with the M10 x 100mm Bolt (30) and an M10 Nylon
Locknut (33).
14
4
Do not overtighten the M10 Nylon Locknuts
(33); the Seat Bracket (6) must be able to pivot
easily.
12
34
23
Indent
10
4. Press the four 20mm x 40mm Inner Caps (12)
into the ends of the Backrest Frames (8). Orient
the Backrest Frames as shown. Note: The
indents in the Backrest Frames must be on
the indicated side.
24
34
25
25
24
Attach the Backrest Bracket (9) to the Backrest
Frames (8) with four M8 x 55mm Carriage Bolts
(24) and four M8 Nylon Locknuts (25).
23
8
9
Attach the Backrest (10) to the Backrest Frames
(8) with four M6 x 50mm Bolts (23) and four M6
Washers (34). The Backrest must be oriented
as shown.
34
12
5
5. Press two 8mm Bushings (14) into the bottom
holes in the Backrest Frames (8). Press two 8mm
Bushings (14) into the holes in the Seat Frame (5).
10
Screw the Backrest Adjustment Knob (13) into the
Bench Frame (1). Pull the Knob out as far as it will
go, and lower the Backrest Bracket (9) between
the two tubes on the Bench Frame. Snap the Knob
into an adjustment hole in the Backrest Bracket.
32
9
33
Adjustment
Holes
Lubricate an M10 x 140mm Bolt (35). Attach the
bottom holes in both the Backrest Frames (8) and
the two Plastic Plates (36) to the Seat Frame (5)
with the Bolt, two 12.5mm Spacers (15), and an
M10 Nylon Locknut (33) as shown.
14
32
1
8
36
35
14
13
Lubricate the other M10 x 140mm Bolt (35). Attach
the top holes in both the Backrest Frames (8) and
the two Plastic Plates (36) to the Bench Frame (1)
with the Bolt, two M10 Washers (32), and an M10
Nylon Locknut (33).
15
14
5
Do not overtighten the M10 Nylon Locknuts
(33); the Backrest (10) must be able to pivot
easily.
14
15
7
6. Press three 50mm Square Inner Caps (37) into
the Leg Lever (4). Press a 50mm Round Inner
Cap (19) into the weight tube.
6
14
33
37
4
37
19
7
Press two 8mm Bushings (14) into the Leg Lever
Bracket (7).
Lubricate the M10 x 78mm Bolt (29). Attach the
Leg Lever (4) to the Leg Lever Bracket (7) with
the Bolt and an M10 Nylon Locknut (33). Do not
overtighten the Nylon Locknut; the Leg Lever
must pivot freely.
29
Weight Tube
37
7. Attach the Seat (11) to the brackets on the Seat
Frame (5) using two M6 x 16mm Bolts (26). Attach
the other end of the Seat to the Seat Frame with
an M6 Washer (34) and an M6 x 50mm Bolt (23).
7
11
26
34
23
5
26
8. Press four 19mm Round Inner Caps (17) into the
ends of the two Pad Tubes (16).
8
18
Insert the Pad Tubes (16) into the holes in the
Leg Lever (4). Slide two Foam Pads (18) onto
each Pad Tube.
4
17
16
17
18
9. Make sure that all parts of the weight bench
are properly tightened.
8
ADJUSTMENTS
This section explains how to adjust the weight bench. See the EXERCISE GUIDELINES on page 10 for impor-
tant information about how to get the most benefit from your exercise program. Also, refer to the accompanying
exercise guide to see the correct form for several exercises.
Make sure all parts are properly tightened each time you use the weight bench. Replace any worn parts immediate-
ly. The weight bench can be cleaned with a damp cloth and a mild, non-abrasive detergent. Do not use solvents.
ADJUSTING THE BACKREST
The Backrest (10) can be used in eight different posi-
tions. To adjust the Backrest, hold the Backrest up and
pull the Backrest Adjustment Knob (13) out as far as it
will go. Move the Backrest to the desired position and
insert the Knob into an adjustment hole in the Backrest
Bracket (9).
10
9
WARNING:
When adjusting the
position of the Backrest (10), first remove all
weight from the weight tube on the Leg Lever
(4). Make sure that the Backrest Adjustment
Knob (13) is fully inserted through the Backrest
Bracket (9).
4
13
Adjustment
Hole
9
EXERCISE GUIDELINES
THE FOUR BASIC TYPES OF WORKOUTS
PERSONALIZING YOUR EXERCISE PROGRAM
Muscle Building
Determining the exact length of time for each workout,
as well as the number of repetitions or sets completed,
is an individual matter. It is important to avoid overdo-
ing it during the first few months of your exercise pro-
gram. You should progress at your own pace and be
To increase the size and strength of your muscles,
push them close to their maximum capacity. Your mus-
cles will continually adapt and grow as you progres-
sively increase the intensity of your exercise. You can
adjust the intensity level of an individual exercise in two sensitive to your body’s signals. If you experience pain
ways:
or dizziness at any time while exercising, stop immedi-
ately and begin cooling down. Find out what is wrong
before continuing. Remember that adequate rest and a
proper diet are important factors in any exercise pro-
• by changing the amount of weight used
• by changing the number of repetitions or sets per-
formed. (A “repetition” is one complete cycle of an
exercise, such as one sit-up. A “set” is a series of rep- gram.
etitions.)
WARMING UP
The proper amount of weight for each exercise
depends upon the individual user. You must gauge
your limits and select the amount of weight that is right
Begin each workout with 5 to 10 minutes of stretching
and light exercise to warm up. Warming up prepares
for you. Begin with 3 sets of 8 repetitions for each exer- your body for more strenuous exercise by increasing
cise you perform. Rest for 3 minutes after each set. circulation, raising your body temperature and deliver-
When you can complete 3 sets of 12 repetitions without ing more oxygen to your muscles.
difficulty, increase the amount of weight.
WORKING OUT
Toning
You can tone your muscles by pushing them to a mod-
erate percentage of their capacity. Select a moderate
amount of weight and increase the number of repeti-
tions in each set. Complete as many sets of 15 to 20
repetitions as possible without discomfort. Rest for 1
minute after each set. Work your muscles by complet-
ing more sets rather than by using high amounts of
weight.
Each workout should include 6 to 10 different exercis-
es. Select exercises for every major muscle group,
emphasizing areas that you want to develop most. To
give balance and variety to your workouts, vary the
exercises from session to session.
Schedule your workouts for the time of day when your
energy level is the highest. Each workout should be fol-
lowed by at least one day of rest. Once you find the
schedule that is right for you, stick with it.
Weight Loss
To lose weight, use a low amount of weight and
increase the number of repetitions in each set.
Exercise for 20 to 30 minutes, resting for a maximum of
30 seconds between sets.
EXERCISE FORM
Maintaining proper form is an essential part of an effec-
tive exercise program. This requires moving through
the full range of motion for each exercise, and moving
only the appropriate parts of the body. Exercising in an
uncontrolled manner will leave you feeling exhausted.
On the exercise guide accompanying this manual you
will find photographs showing the correct form for sev-
eral exercises, and a list of the muscles affected. Refer
to the muscle chart on page 11 to find the names of the
muscles.
Cross Training
Cross training is an efficient way to get a complete and
well-balanced fitness program. An example of a bal-
anced program is:
• Plan weight training workouts on Monday,
Wednesday, and Friday.
• Plan 20 to 30 minutes of aerobic exercise, such as
cycling or swimming, on Tuesday and Thursday.
• Rest from both weight training and aerobic exercise
for at least one full day each week to give your body
time to regenerate.
The repetitions in each set should be performed
smoothly and without pausing. The exertion stage of
each repetition should last about half as long as the
return stage. Proper breathing is important. Exhale dur-
ing the exertion stage of each repetition and inhale dur-
ing the return stroke. Never hold your breath.
The combination of weight training and aerobic exer-
cise will reshape and strengthen your body, plus devel-
op your heart and lungs.
10
Rest for a short period of time after each set. The ideal
resting periods are:
• Rest for three minutes after each set for a muscle
building workout.
slowly as you stretch and do not bounce. Ease into
each stretch gradually and go only as far as you can
without strain. Stretching at the end of each workout is
an effective way to increase flexibility.
• Rest for one minute after each set for a toning work-
out.
STAYING MOTIVATED
• Rest for 30 seconds after each set for a weight loss
workout.
Plan to spend the first couple of weeks familiarizing
yourself with the equipment and learning the proper
form for each exercise.
For motivation, keep a record of each workout. The
charts on pages 12 and 13 of this manual can be pho-
tocopied and used to schedule and record your work-
outs. List the date, the exercises performed, the
weight used, and the numbers of sets and repetitions
completed. Record your weight and key body mea-
surements at the end of every month. Remember, the
key to achieving the greatest results is to make exer-
cise a regular and enjoyable part of your everyday life.
COOLING DOWN
End each workout with 5 to 10 minutes of stretching.
Include stretches for both your arms and legs. Move
MUSCLE CHART
N
O
P
A. Sternomastoid (neck)
B. Pectoralis Major (chest)
C. Biceps (front of arm)
D. Obliques (waist)
A
B
E. Brachioradials (forearm)
F. Hip Flexors (upper thigh)
G. Abductor (outer thigh)
H. Quadriceps (front of thigh)
I. Sartorius (front of thigh)
J. Tibialis Anterior (front of calf)
K. Soleus (front of calf)
C
D
E
Q
R
S
F
L
T
L. Rectus Abdominus (stomach)
M. Adductor (inner thigh)
G
M
N. Trapezius (upper back)
O. Rhomboideus (upper back)
P. Deltoid (shoulder)
H
I
U
V
Q. Triceps (back of arm)
J
K
W
R. Latissimus Dorsi (mid back)
S. Spinae Erectors (lower back)
T. Gluteus Medius (hip)
U. Gluteus Maximus (buttocks)
V. Hamstring (back of leg)
W. Gastrocnemius (back of calf)
11
EXERCISE
WEIGHT
WEIGHT
WEIGHT
SETS
SETS
SETS
REPS
REPS
REPS
MONDAY
Date:
/
/
AEROBIC EXERCISE
EXERCISE
TUESDAY
Date:
/
/
WEDNESDAY
Date:
/
/
AEROBIC EXERCISE
EXERCISE
THURSDAY
Date:
/
/
FRIDAY
Date:
/
/
Make photocopies of this page for scheduling and recording your workouts.
12
EXERCISE
WEIGHT
WEIGHT
WEIGHT
SETS
SETS
SETS
REPS
REPS
REPS
MONDAY
Date:
/
/
AEROBIC EXERCISE
EXERCISE
TUESDAY
Date:
/
/
WEDNESDAY
Date:
/
/
AEROBIC EXERCISE
EXERCISE
THURSDAY
Date:
/
/
FRIDAY
Date:
/
/
Make photocopies of this page for scheduling and recording your workouts.
13
PART LIST—Model No. WEBE09010
R0901C
Key No. Qty.
Description
Key No. Qty.
Description
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
1
1
1
1
1
1
1
2
1
1
1
4
1
10
2
2
4
4
1
1
Bench Frame
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
#
1
4
5
4
4
2
1
1
1
1
4
6
9
5
2
2
3
1
1
50mm x 75mm Inner Cap
50mm Square Outer Cap
M6 x 50mm Bolt
M8 x 55mm Carriage Bolt
M8 Nylon Locknut
Front Stabilizer
Rear Stabilizer
Leg Lever
Seat Frame
Seat Bracket
Leg Lever Bracket
Backrest Frame
Backrest Bracket
Backrest
M6 x 16mm Bolt
M10 x 75mm Bolt
M10 x 45mm Adjustment Knob
M10 x 78mm Bolt
M10 x 100mm Bolt
M10 x 65mm Bolt
M10 Washer
M10 Nylon Locknut
M6 Washer
M10 x 140mm Bolt
Plastic Plate
Seat
20mm x 40mm Inner Cap
Backrest Adjustment Knob
8mm Bushing
12.5mm Spacer
Pad Tube
19mm Round Inner Cap
Foam Pad
50mm Round Inner Cap
40mm x 50mm Inner Cap
50mm Square Inner Cap
User’s Manual
Exercise Guide
#
Note: “#” indicates a non-illustrated part. Specifications are subject to change without notice. See the back cover
of the user’s manual for information about ordering replacement parts.
14
EXPLODED DRAWING—Model No. WEBE09010
R0901C
11
12
23
10
8
34
24
18
25
17
25
24
18
16
32
33
23
17
9
14
15
34
14
33
14
32
14
20
5
37
37
19
14
4
12
35
34
23
15
14
29
7
28
26
33
27
36
13
6
30
37
14
18
21
1
17
14
22
16
33
2
17
31
32
18
3
32
32
33
22
32
31
22
22
15
ORDERING REPLACEMENT PARTS
To order replacement parts, call our Customer Service Department toll-free at 1-800-999-3756, Monday through
Friday, 6 a.m. until 6 p.m. Mountain Time (excluding holidays). To help us assist you, please be prepared to give
the following information when calling:
• The MODEL NUMBER of the product (WEBE09010)
• The NAME of the product (WEIDER® PRO XT10 weight bench)
• The SERIAL NUMBER of the product (see the front cover of this manual)
• The KEY NUMBER and DESCRIPTION of the desired part(s) (see the PART LIST and the EXPLODED
DRAWING on pages 14 and 15 of this manual).
LIMITED WARRANTY
ICON Health & Fitness, Inc. (ICON), warrants this product to be free from defects in workmanship and mate-
rial, under normal use and service conditions, for a period of ninety (90) days from the date of purchase. This
warranty extends only to the original purchaser. ICON's obligation under this warranty is limited to replacing
or repairing, at ICON's option, the product at one of its authorized service centers. All products for which war-
ranty claim is made must be received by ICON at one of its authorized service centers with all freight and other
transportation charges prepaid, accompanied by sufficient proof of purchase. All returns must be pre-autho-
rized by ICON. This warranty does not extend to any product or damage to a product caused by or attribut-
able to freight damage, abuse, misuse, improper or abnormal usage or repairs not provided by an ICON
authorized service center, products used for commercial or rental purposes, or products used as store display
models. No other warranty beyond that specifically set forth above is authorized by ICON.
ICON is not responsible or liable for indirect, special or consequential damages arising out of or in connection
with the use or performance of the product or damages with respect to any economic loss, loss of property,
loss of revenues or profits, loss of enjoyment or use, costs of removal, installation or other consequential dam-
ages of whatsoever nature. Some states do not allow the exclusion or limitation of incidental or consequen-
tial damages. Accordingly, the above limitation may not apply to you.
The warranty extended hereunder is in lieu of any and all other warranties and any implied warranties of mer-
chantability or fitness for a particular purpose is limited in its scope and duration to the terms set forth herein.
Some states do not allow limitations on how long an implied warranty lasts. Accordingly, the above limitation
may not apply to you.
This warranty gives you specific legal rights. You may also have other rights which vary from state to state.
ICON HEALTH & FITNESS, INC., 1500 S. 1000 W., LOGAN, UT 84321-9813
Part No. 176945 R0901C
Printed in China © 2001 ICON Health & Fitness, Inc.
|