SONANCE
S
YMPHONY®
S623LCR SPEAKER
Sonance Symphony® Series
S623LCR Home Theater Speaker
The new Sonance Symphony® S623LCR home theater Installation is quick and easy thanks to the RotoLock®
speaker is a visual and sonic match for our best-selling mounting system. Exclusive FastMount® tabs hold the
Sonance Symphony speaker line.
speaker in the mounting hole during installation, allowing
the installer to let go of it to pick-up tools or other items.
And the S623LCR is designed to fit between standard 16”
on-center studs (the standard stud spacing in the USA).
Incorporating the same drivers as the Symphony S623T
and S623TR but in
a
traditional dual woofer/single
tweeter home theater speaker format, the S623LCR makes
an ideal center-channel counterpart for any Symphony The new Sonance S623LCR is the perfect center-channel
series left and right channel speaker pair in small or match for any Sonance Symphony series speaker pair,
medium-sized home theater systems. And by using the giving dealers and installers all the tools they need to
S623LCR in all three front-channel positions (left, center create exceptional home theater systems in a variety of
and right) and other Symphony series speakers as configurations.
surround channels, an exceptionally high-performance
home theater system can be assembled.
Features:
• Traditional dual woofer/single tweeter home
theater speaker configuration.
Specifications:
Sonance Symphony S623LCR
Tweeter:
Woofer:
1" (25mm) Silk dome, Ferrofluid-
cooled
• Visually and sonically matches other Sonance
Symphony® series speaker models.
• Dual carbon fiber cone woofers produce deep,
powerful bass and provide high-output low-
distortion music and film dialog.
Two 6½" (165mm) Carbon fiber
cones, rubber surrounds
Frequency Response:
Impedance:
43Hz – 20kHz 3dB
• Fits standard 16” on-center stud construction.
• Exclusive new FastMount® tabs hold the speaker in
the mounting hole during installation, allowing the
installer to let go of the speaker to pick-up tools or
other items.
8 ohms nominal; 6 ohms minimum
Power Handling:
5 watts minimum;
135 watts maximum
• The Rotolock® mounting system makes installation
quick and easy.
Sensitivity:
92dB SPL (2.83V/1 meter)
Perforated Aluminum
3dB Tweeter Level
Grille Material:
Adjustments:
• A three position tweeter adjustment switch lets
you balance the speaker’s high-frequency energy
to better complement the room’s setup and
acoustics.
Dimensions (W x H x D):
16" x 8 1/8" x 37/8"
(407mm x 206mm x 98mm)
• Removable IR plug accommodates a Sonance
OptiLinQ® SMR1 or SMR1P IR receiver, allowing
convenient front-of-the-room aiming for system IR
remote controls.
Cutout Dimensions (W x H): 14½" x 6¾" (368mm x 171mm)
Shipping Weight: 7 lbs (3.2kg) each
• Paintable perforated aluminum grille with built-in
scrim cloth.
|