Register your product and get support at
DC350/37
Philips vous remercie de
votre confiance.
Thank you for choosing Philips.
Gracias por escoger Philips
Need help fast?
Besoin d'une aide
rapide?
Le Guide rapide de début et Manuel de
l'utilisateur regorgent d'astuces destinées à
simplifier l'utilisation de votre produit Philips.
Toutefois, si vous ne parvenez pas à résoudre
votre probléme, vous pouvez accéder à
notre aide en ligne à l'adresse
Necesita ayuda
inmediata?
Lea primero la Guía rápida del comienzo
o el Manual del usuario, en donde encontrará
consejos que le ayudarán a disfrutar
plenamente de su producto Philips.
Si después de leerlo aún necesita ayuda,
consulte nuestro servicio de
Read your Quick Start Guide and/or
User Manual first for quick tips
that make using your Philips product
more enjoyable.
If you have read your instructions
and still need assistance,
you may access our online help at
asistencia en línea en
or call
ou formez le
o llame al teléfono
1-888-PHILIPS (744-5477)
while with your product.
(and Model / Serial number)
1-800-661-6162 (Francophone)
1-888-PHILIPS (744-5477) (English speaking)
Veillez à avoir votre produit à
portée de main.
1-888-PHILIPS (744-5477)
y tenga a mano el producto.
(y número de model / serial)
(et model / serial nombre)
EN User manual
3
29
56
FR Mode d’emploi
ES Manual del usuario
4
EN
Contents
1
Important
6
6
7
Safety
Notice
9
9
2
Your Docking Entertainment System
Introduction
What’s in the box
9
Overview of the main unit
Overview of the remote control
9
12
14
14
15
16
16
3
Get started
Prepare the remote control
Connect power
Set clock and date
Turn on
16
16
18
4
5
Play
Play from iPod/iPhone
Play from an external device
18
18
18
18
19
Adjust sound
Adjust volume level
Enhance bass
Select a preset sound effect
Mute sound
19
19
19
19
20
6
Listen to radio
Tune to a radio station
Program radio stations automatically
Program radio stations manually
Select a preset radio station
20
21
22
23
7
8
9
Use Bluetooth devices
Connect with a Bluetooth device
Receive a phone call
Listen to music
23
23
25
25
Other features
Set the alarm timer
Set the sleep timer
Adjust display brightness
25
25
Product information
Specifications
27
10 Troubleshooting
EN
5
1 Important
Safety
Important Safety Instructions
a
b
c
d
e
f
g
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
h
i
Do not install near any heat sources such as radiators, heat registers, stoves, or
other apparatus (including amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or grounding-
type plug.A polarized plug has two blades with one wider
than the other.A grounding type plug has two blades and a
third grounding prong.The wide blade or the third prong are
provided for your safety. If the provided plug does not fit into your outlet,
consult an electrician for replacement of the obsolete outlet.
j
Protect the power cord from being walked on or pinched, particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
k
l
Only use attachments/accessories specified by the manufacturer.
Use only with the cart, stand, tripod, bracket, or table specified by
the manufacturer or sold with the apparatus.When a cart is used,
use caution when moving the cart/apparatus combination to avoid
injury from tip-over.
m
n
Unplug this apparatus during lightning storms or when unused for long periods
of time.
Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or
has been dropped.
o
Battery usage CAUTION –To prevent battery leakage which may result in
bodily injury, property damage, or damage to the unit:
•
Install all batteries correctly, + and - as marked on the unit.
6
EN
•
•
Do not mix batteries (old and new or carbon and alkaline, etc.).
Remove batteries when the unit is not used for a long time.
p
q
Apparatus shall not be exposed to dripping or splashing.
Do not place any sources of danger on the apparatus (e.g. liquid filled objects,
lighted candles).
r
This product may contain lead and mercury. Disposal of these materials may
be regulated due to environmental considerations. For disposal or recycling
information, please contact your local authorities or the Electronic Industries
s
Where the MAINS plug or an appliance coupler is used as the disconnect
device, the disconnect device shall remain readily operable.
Warning
•
•
•
•
•
Never remove the casing of this apparatus.
Never lubricate any part of this apparatus.
Never place this apparatus on other electrical equipment.
Keep this apparatus away from direct sunlight, naked flames or heat.
Ensure that you always have easy access to the power cord, plug or adaptor to disconnect the
apparatus from the power.
Notice
Notice of compliance
The set complies with the FCC Part 15 and with RSS-210. Operation is subject to the
following two conditions:
1.This device may not cause harmful interference, and
2.This device must accept any interference received, including interference that may
cause undesired operation.
FCC rules
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference
in a residential installation.This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
EN
7
•
•
Connect the equipment into an outlet on a circuit different from that to which the
• receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Warning: Changes or modifications made to this equipment not expressly approved by
Philips could void the user’s authority to operate this equipment.
Model number: PHILIPS DC350/37
Trade Name: Philips
Responsible Party:
Philips Consumer Lifestyle
P. O. Box 671539
Marietta, GA 30006-0026
1-800-PHILIPS (744-5477)
FCC Radiation Exposure Statement
To comply with FCC RF exposure requirements, the device and the antenna for this
device must be installed to ensure a minimum separation distance of 20 cm or more
from a person’s body. Other operating configurations should be avoided.
Canada
This Class B digital apparatus complies with Canadian ICES-003.
Environmental information
All unnecessary packaging has been omitted.We have tried to make the packaging
easy to separate into three materials: cardboard (box), polystyrene foam (buffer) and
polyethylene (bags, protective foam sheet.)
Your system consists of materials which can be recycled and reused if disassembled by
a specialized company. Please observe the local regulations regarding the disposal of
packaging materials, exhausted batteries and old equipment.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth
SIG, Inc. and any use of such marks by Philips is under license.
Windows Media and the Windows logo are trademarks, or registered
trademarks of Microsoft Corporation in the United States and/or other
countries.
8
EN
2 Your Docking Entertainment System
Introduction
With this unit, you can enjoy audio from the iPod, iPhone, other audio devices, or the radio.
If you own a Bluetooth-enabled device, you can also receive phone calls or listen to
audio from the device.
The radio, iPod, or iPhone can be set as the alarm timer.You can set two alarm timers to
go off at different times.
For the best sound quality, enrich sound from any source with Digital Sound Control
(DSC) and Dynamic Bass Boost.
What’s in the box
Check and identify the contents of your package:
•
•
•
•
•
Main unit
Remote control
1 x AC adaptor
1 x MP3 link cable
1 x mini USB cable
Overview of the main unit
EN
9
a
ALM 1
•
•
•
Set the first alarm timer.
View the first alarm time.
Turn off the first alarm tone.
b
c
Bluetooth indicator
•
Indicate Bluetooth connection.
•
•
Turn on the unit or switch to standby mode.
Turn off an alarm tone.
d
e
SLEEP
•
Set the sleep timer.
PRESET +/-
•
•
Select a preset radio station.
Program radio stations.
f
MUTE
•
•
Mute volume.
Mute the built-in microphone during a phone call.
PROG
•
Program radio stations.
TIME SET
•
Set the clock.
g
h
PAIRING
•
•
•
Pair the unit with a Bluetooth device.
Answer an incoming phone call.
During a phone call: select to hear the audio from the device or from the unit.
/
•
•
•
•
•
Skip to the previous/next audio file.
Search within an audio file.
Tune to a radio station.
Adjust time.
Select 12 hour or 24 hour format.
i
j
MIC
•
Built-in microphone for phone calls.
•
•
•
Reject an incoming phone call.
End a phone call.
Disconnect a device.
k
l
iPod/iPhone dock
•
Load an iPod/iPhone.
VOL +/-
•
Adjust volume.
10
EN
m
n
o
p
q
•
Start or pause iPod/iPhone play.
SOURCE
•
Select a source: iPod/iPhone, Bluetooth, tuner or MP3 link.
Tilt adjustment rod
•
Move forward/backward to adjust the angle at which the iPod/iPhone tilts.
Display panel
•
Show current status.
ALM 2
•
•
•
Set the second alarm timer.
View the second alarm time.
Turn off the second alarm tone.
r
REPEAT ALARM/BRIGHTNESS CONTROL
•
•
Repeat an alarm tone at 9-minute intervals.
Adjust the display brightness.
s
t
u
MP3 LINK
•
Audio input jack for an external audio device.
TO PC
•
Mini USB jack for synchronization between the iPod/iPhone and a computer.
Pigtail
•
Improve FM reception.
EN
11
v
w
x
y
DEMO
•
Jack for a special device (not supplied) to demonstrate features of the unit.
DC IN
•
Jack for the supplied AC adaptor.
Tilt adjustment control
•
Control the angle at which the iPod/iPhone tilts.
iPhone/iPod-RADIO-BUZZER
•
Select alarm mode.
Overview of the remote control
a
b
iPod/iPhone
•
Select iPod/iPhone source.
POWER
•
•
Turn on the unit or switch to standby mode.
Turn off an alarm tone.
12
EN
c
d
e
PRESET +/-
•
•
Select a preset radio station.
Program radio stations.
/OK
•
•
Start or pause iPod/iPhone play.
Confirm an iPod/iPhone menu selection.
/
•
•
•
•
•
Skip to the previous/next audio file.
Search within an audio file.
Tune to a radio station.
Adjust time.
Select 12 hour or 24 hour format.
f
g
h
i
j
k
TUNER
•
Select tuner source.
MENU
•
Access iPod/iPhone menu.
SLEEP
•
Set the sleep timer.
DBB
•
Turn on or off dynamic bass enhancement.
Select a preset sound setting: POP, JAZZ, CLASSIC or ROCK.
DSC
•
PAIRING
•
•
•
Pair the unit with a Bluetooth device.
Answer an incoming phone call.
During a phone call: select to hear the audio from the device or from the unit.
l
•
•
•
Reject an incoming phone call.
End a phone call.
Disconnect a device.
m
n
VOL +/-
•
Adjust volume.
SETTIME/PROG
•
•
Set the clock.
Program radio stations.
o
p
MP3 LINK
•
Audio input jack for an external audio device.
MUTE
•
•
Mute volume.
Mute the built-in microphone during a phone call.
EN
13
q
BLUETOOTH
Select Bluetooth source.
•
3 Get started
Caution
•
Use the controls only as stated in this user manual.
Always follow the instructions in this chapter in sequence.
If you contact Philips, you will be asked for the model and serial number of this
apparatus.The model number and serial number are on the bottom of the apparatus.
Write the numbers here:
Model No. __________________________
Serial No. ___________________________
Prepare the remote control
Caution
•
•
Risk of explosion! Keep batteries away from heat, sunshine or fire. Never discard batteries in fire.
perchlorate.
For first-time use:
1
Remove the protective tab to activate the remote control battery.
To replace the remote control battery:
1
2
3
Open the battery compartment.
Insert 1 CR2025 battery with correct polarity (+/-) as indicated.
Close the battery compartment.
14
EN
Note
•
•
Before pressing any function button on the remote control, first select the correct source with the
remote control instead of the main unit.
If you are not going to use the remote control for a long time, remove the battery.
Connect power
Caution
•
•
•
Risk of product damage! Ensure that the power voltage corresponds to the voltage printed on the
back or underside of the apparatus.
Risk of electric shock! When you unplug the AC adaptor, always pull the plug from the socket.
Never pull the cord.
Before connecting the AC adaptor, ensure you have completed all other connections.
Note
•
The type plate is located on the bottom of the main unit.
1
Prepare the AC power adaptor.
2
Connect one end of the AC adaptor to the DC IN socket on the main unit.
EN
15
3
Connect the other end of the AC adaptor to the wall outlet.
Set clock and date
1
Press and hold SETTIME for 2 seconds.
»
The hour digits are displayed and begin to blink.
2
3
Press
/
to set the hour.
Press SETTIME to confirm.
The minute digits are displayed and begin to blink.
»
4
5
6
Repeat steps 2-3 to set minute, year, month and day.
Press to select 12 hour or 24 hour format.
Press SETTIME to confirm.
/
Turn on
1
Press POWER.
The unit switches to the last selected source.
»
Switch to standby
1
Press POWER again to switch the unit to standby mode.
The date appears on the display panel.
»
4 Play
Play from iPod/iPhone
You can enjoy audio from iPod/iPhone through this unit.
Compatible iPod/iPhone
Apple iPod and iPhone models with a 30-pin dock connector:
16
EN
•
•
iPod classic, iPod touch, iPod nano, iPod 5th generation (video), iPod with color
display, iPod mini.
iPhone, iPhone 3G.
Load the iPod/iPhone
1
2
With the connectors facing each other, place the iPod/iPhone in the dock.
Turn the tilt adjustment control to adjust the angle at which the iPod/iPhone tilts.
»
When the unit is connected to power, the docked iPod/iPhone begins to charge.
Remove the iPod/iPhone
1
Pull the iPod/iPhone out of the dock.
Listen to the iPod/iPhone
1
Ensure that the iPod/iPhone is loaded correctly. (see ‘Load the iPod/iPhone’ on
page 17)
2
Press iPod/iPhone to select iPod/iPhone source.
»
The connected iPod/iPhone plays automatically.
•
•
•
To pause/resume play, press
To skip to a track, press
To serach during play, press and hold
normal play.
.
.
/
/
, then release to resume
EN
17
•
To navigate the menu, press MENU, and press PRESET +/- to select, then
press /OK to confirm.
Connect to a computer
1
2
3
Load the iPod/iPhone in the dock.
Press iPod/iPhone select the iPod/iPhone source.
Connect the mini USB cable (supplied) to:
•
the TO PC jack (mini USB jack) on the back of the unit.
•
the USB jack on the computer.
»
If iTunes is installed on the computer, the connected iPod/iPhone begins to
synchronize with iTunes. Refer to the device user manual for more details.
Charge the iPod/iPhone
When the unit is connected to power, the docked iPod/iPhone begins to charge.
Play from an external device
You can also listen to an external audio device through this unit.
1
2
Press MP3 Link to select MP3 link source.
Connect the supplied MP3 link cable to:
•
•
the MP3 LINK jack (3.5mm) on the back of the unit.
the headphone jack on an external device.
3
Start to play the device (see the device user manual).
5 Adjust sound
Adjust volume level
1
During play, press VOL +/- to increase/decrease the volume level.
Enhance bass
1
During play, press DBB to turn on or off dynamic bass enhancement.
If DBB is activated, DBB is displayed.
»
Select a preset sound effect
1
During play, press DSC repeatedly to select:
•
•
•
•
[POP] (pop)
[JAZZ] (jazz)
[CLASSIC] (classic)
[ROCK] (rock)
18
EN
Mute sound
1
During play, press MUTE to mute/unmute sound.
6 Listen to radio
Note
•
Only FM radio reception is available on this unit.
Tune to a radio station
1
2
Press TUNER to select FM.
Press and hold for more than 2 seconds.
/
»
[Srch] (search) is displayed.
»
The radio tunes to a station with strong reception automatically.
3
Repeat step 2 to tune to more stations.
•
To tune to a weak station, press
reception.
/
repeatedly until you find optimal
Program radio stations automatically
You can program a maximum of 20 preset radio stations.
1
In the tuner mode, press and hold PROG for more than 2 seconds to activate
automatic program mdoe.
»
[AUTO] (auto) is displayed.
»
All available stations are programmed in the order of waveband reception
strength.
»
The first programmed radio station is brodcast automatically.
Program radio stations manually
You can program a maximum of 20 preset radio stations.
1
2
Press PRESET +/- to select a number (1 to 20).
Press and hold PRESET +/- for more than 2 seconds to activate program mode.
»
“PRXX” is displayed and begins to blink.
3
4
Tune to a radio station. (see ‘Tune to a radio station’ on page 19)
Press
to confirm.
»
The preset number and the frequency of the preset station are displayed.
EN
19
5
Repeat the above steps to program other stations.
Note
•
To overwrite a programmed station, store another station in its place.
Select a preset radio station
1
Press PRESET +/- to select a preset number.
Tip
•
•
Position the antenna as far as possible fromTV,VCR or other radiation source.
For optimal reception, fully extend and adjust the position of the antenna.
7 Use Bluetooth devices
This unit can wirelessly receive audio from Bluetooth-enabled devices within a range of
approximately 10 meters (30 feet).
Supported Bluetooth profiles
This unit supports these Bluetooth profiles:
•
•
•
•
Hands-Free Profile (HFP)
Headset Profile (HSP)
Advanced Audio Distribution Profile (A2DP)
AudioVideo Remote Control Profile (AVRCP)
Tip
•
Before you use a Bluetooth-enabled device with this unit, read the user manual of the device for
compatibility.
20
EN
Connect with a Bluetooth device
Note
•
•
The operational range between this unit and a Bluetooth device is approximately 10 meters (30 feet).
Before you connect a Bluetooth device to this unit, familiarize yourself with the Bluetooth
capabilities of the device.
•
•
•
Compatibility with all Bluetooth devices is not guaranteed.
Any obstacle between this unit and a Bluetooth device can reduce the operational range.
Keep this unit away from any other electronic device that may cause interference.
Connect a device for the first time
Tip
•
This unit can memorize the connection information of up to 8 devices.
1
2
3
Press BLUETOOTH to select the Bluetooth source.
For an iPhone, load it in the dock for automatic re-connection setup.
Press and hold PAIRING for more than 3 seconds.
»
The Bluetooth indicator blinks.
4
On the device, set up the Bluetooth connection:
a
b
c
Enable Bluetooth to search for other Bluetooth devices. (Refer to the
device user manual on how to enable the function.)
When “ PHILIPS DC350” is recognized and displayed, select it to start to
connect.
When prompted for a password, enter “0000”.
5
Wait until the Bluetooth indicator turns on.
The connection is complete.
»
To connect more Bluetooth devices
1
2
Disconnect the currently-connected device. (see ‘Disconnect a device’ on page 22)
Repeat the steps 1-5 in “Connect a device”.
Tip
•
If no connection is made within one minute, [FAILED] (failed) is displayed on the main unit.
EN
21
Disconnect a device
1
Press and hold
for more than 5 seconds
•
To disconnect, you can also turn off the connected device or move it
beyond the communication range.
•
The Bluetooth indicator turns off.
Re-connect a previously-connected device
Tip
•
For a previously-connected iPhone which Bluetooth function is enabled, once it is docked in this
unit, it re-connects automatically.
1
2
Turn on the main unit.
On the device, set up the Bluetooth connection:
a
Enable Bluetooth to search for other Bluetooth devices. (Refer to the
device user manual on how to enable the function.)
b
When “ PHILIPS DC350” is recognized and displayed, select it to start to
connect.
3
Wait until the Bluetooth indicator turns on.
Re-connection is completed.
»
Receive a phone call
Note
•
You can receive phone calls through this unit with devices that support the HFP or HSP profile.
1
2
Connect the Bluetooth device. (see ‘Connect with a Bluetooth device’ on page 21)
When a call is received, you hear the incoming call alert tone. Press PAIRING to
accept the call.
•
To reject the call, press
.
3
Speak into the MIC located on the front panel.
•
•
•
To increase or decrease the volume, press VOL +/-.
To mute the microphone, press MUTE.To unmute, press this button again.
To select to hear the audio from the device or from the main unit, press
PAIRING
.
4
Press
to end the call.
22
EN
Tip
•
•
•
To be heard more clearly, speak closer to the microphone.
If an echo is heard, reduce the volume of the main unit.
If you observe communication difficulties, position the Bluetooth device closer to the main unit.
Listen to music
Note
•
•
You can listen to audio through this unit from devices that support A2DP or AVRCP.
As iPhone doesn’t support Bluetooth audio streaming, this unit doesn’t play audio files from
iPhone through Bluetooth connection.
1
2
Connect the Bluetooth device. (see ‘Connect with a Bluetooth device’ on page 21)
On the Bluetooth device, start play.
»
You hear the music through the unit.
•
•
To pause/resume play, press
To skip to a track, press
.
/
.
8 Other features
Set the alarm timer
You can set two alarms which go off at different time.
1
2
Ensure that you have set the clock correctly. (see ‘Set clock and date’ on page 16)
Press and hold ALM 1 or ALM 2 on the main unit for 2 seconds.
»
Hour digits blink.
»
[AL 1] (alarm 1) or [AL 2] (alarm 2) is displayed.
3
4
5
6
7
Press
/
repeatedly to set the hour.
Press ALM 1 or ALM 2 to confirm.
Press repeatedly to set the minute.
Press ALM 1 or ALM 2 to confirm.
/
Press VOL +/- to set a volume level for alarm tone.
»
The volume level is applied to two alarms.
Press ALM 1 or ALM 2 to confirm.
To set the other alarm, repeat the steps 2 -8.
8
•
EN
23
Note
•
•
Only the latest volume setting for alarm tone works.
Tip
To view alarm time, press ALM 1 or ALM 2 repeatedly until alarm time is displayed.
Set alarm mode
1
Adjust the iPhone/iPod-RADIO-BUZZER control on the main unit to select the
source for the alarm.
»
When the alarm time comes, the selected Phone/iPod, or radio or buzzer
turns on.
Tip
•
If iPod/iPhone source is selected but no iPod/iPhone is loaded, the buzzer is selected automatically.
Activate and deactivate the alarm timer
Note
•
An alarm can sound only in the standby mode.
1
Press repeatedly ALM 1 or ALM 2 on the main unit to activate or deactivate the
timer.
»
If the timer is activated, is displayed.
»
If the timer is deactivated, disappears.
Turn off the alarm tone
During an alarm tone, you can select one of the following to turn it off.
•
•
•
Press POWER.
»
The alarm timer remains activated.
Press REPEAT ALARM on the main unit.
»
The alarm call repeats at 9-minute intervals.
Press ALM 1 or ALM 2 on the main unit.
The alarm timer remains activated.
»
24
EN
Set the sleep timer
This unit can switch to standby automatically after a set period of time.
1
When the unit is turned on, press SLEEP repeatedly to select a set period of time
(in minutes).
»
When the sleep timer is activated, the display shows
To deactivate sleep timer
Press SLEEP repeatedly until [OFF] (off) is displayed.
.
1
»
When the sleep timer is deactivated, disappears on the display.
Adjust display brightness
1
Press repeatedly BRIGHTNESS CONTROL on the main unit to select:
•
•
•
Bright.
Dim.
Off.
9 Product information
Note
•
Product information is subject to change without prior notice.
Specifications
Amplifier
Rated Output Power
Frequency Response
Signal to Noise Ratio
Aux Input
2X3W RMS
125Hz - 16kHz, ±3dB
>55dB
0.6V RMS 10kohm
EN
25
Tuner
Tuning Range
FM: 87.5 - 108MHz
50KHz
Tuning grid
Sensitivity
- Mono, 26dB S/N Ratio
- Stereo, 46dB S/N Ratio
<22 dBf
<40 dBf
Search Selectivity
>30 dBf
<3%
Total Harmonic Distortion
Signal to Noise Ratio
>40 dB
Speakers
Speaker Impedance
Speaker Driver
Sensitivity
4ohm
2 x 1” full range driver
>80dB/m/W
Bluetooth
Communication system
Bluetooth Standard version 2.0
Output
Bluetooth Standard Power Class 2
Maximum communication range Line of sight approx. 8m
Frequency band
2.4 GHz band (2.4000 GHz - 2.4835 GHz)
Compatible Bluetooth profiles
Hands-Free Profile (HFP)
Handset Profile (HSP)
Advanced Audio Distribution Profile (A2DP)
AudioVideo Remote Control Profile (AVRCP)
Supported codecs
Receive
Transmit
SBC (Sub Band Codec)
SBC (Sub Band Codec)
26
EN
General information
AC power (power adaptor)
Input: 100-240V~, 50-60Hz, 0.55A;
Output: 12V 2A; Brand name: Philips;
Model No.: GFP241DA-1220-1
Operation Power Consumption
Standby Power Consumption
20W
<4W
Dimensions
- Main Unit (W x H x D)
173 x185 x 144mm
0.62 kg
Weight
- Main Unit
10 Troubleshooting
Caution
•
Never remove the casing of this apparatus.
To keep the warranty valid, never try to repair the system yourself.
If you encounter problems when using this apparatus, check the following points before
requesting service. If the problem remains unsolved, go to the Philips web site (www.
philips.com/support).When you contact Philips, ensure that your apparatus is nearby and
the model number and serial number are available.
No power
•
•
•
Ensure that the AC power plug of the unit is connected properly.
Ensure that there is power at the AC outlet.
To save power, the unit switches to standby automatically 15 minutes after a play
reaches the end and no control is operated.
No sound
•
Adjust the volume.
No response from the unit
•
Disconnect and reconnect the AC power plug, then turn on the unit again.
Remote control does not work
•
Before pressing any function button, first select the correct source with the
remote control instead of the main unit.
•
•
Reduce the distance between the remote control and the unit.
Insert the battery with its polarities (+/– signs) aligned as indicated.
EN
27
•
•
Replace the battery.
Aim the remote control directly at the sensor on the front of the unit.
Poor radio reception
•
•
Increase the distance between the unit and yourTV orVCR.
Fully extend the FM antenna.
Clock setting erased
•
•
Power has been interrupted or the power cable has been disconnected.
Reset the clock.
Sound input to the microphone cannot be heard clearly
•
•
•
Speak closer to the microphone when talking, or talk louder.
Reduce or remove background noise.
Reduce the volume of the unit to remove an echo.
Audio quality is poor after connection with a Bluetooth device
•
The Bluetooth reception is poor. Move the device closer to the unit, or remove
any obstacle between the device and the unit.
A device cannot connect with the unit
•
•
•
•
The device does not support Bluetooth communication, or any of the compatible
profiles required for the unit.
You have not enabled the Bluetooth function of the device. Refer to the user
manual of the device on how to enable the function.
The device is not correctly connected. Connect the device correctly. (see ‘Connect
with a Bluetooth device’ on page 21)
The unit is already connected with another Bluetooth device. Disconnect the
connected device, then try again.
The connected mobile phone connects and disconnects constantly
•
•
•
The Bluetooth reception is poor. Move the mobile phone closer to the unit, or
remove any obstacle between the mobile phone and the unit.
Some mobile phones may connect and disconnect constantly when you make or
end calls.This does not indicate any malfunction of the unit.
For some mobile phones, the Bluetooth connection can be deactivated
automatically to save power.This does not indicate any malfunction of the unit.
28
EN
Philips Consumer Lifestyle
A Division of Philips Electronics North America Corporation
P.O. BOX 671539, Marietta, GA. 30006-0026
Meet Philips at the Internet
Printed in China
PDCC-JH/ZYL-0902
|