Omnitron Systems Technology Network Card 8249 0 User Manual

3. The iConverter with the tab brackets should look  
like the picture below (Fig. 1).  
4. Attach unit to the desired surface using the  
appropriate screws.  
5. Follow any installation instructions in the iConverter  
User Manual.  
iConverter® Wall-Mounting Kit  
User Instructions  
Description and Inventory  
The 8249-0 iConverter Wall-Mounting kit was  
designed to attach one iConverter 1-Module or 2-  
Module chassis to a wall, backboard or other flat  
surface. The 8249-0 kit should include the following  
hardware:  
Wall Mounting Bracket  
Fig. 1 1-Module Chassis with  
Wall Mounting Kit  
(2)  
(4)  
(4)  
“L” shaped brackets  
Flat head screws, 4-40, 1/4 inch  
Wall mounting screws  
Technical Support:  
For help with this product,  
contact our Tech. Support:  
Phone: (949) 250-6510  
Warning:  
Before installing an iConverter chassis, make sure to  
remove it from its power adapter. Make sure to  
disconnect the power adapter from the AC line power.  
Fax:  
(949) 250-6514  
Mounting:  
1. Align the screw threads of the iConverter chassis  
with the holes in the bracket.  
Address: Omnitron Systems  
2. Attach one “L” bracket on each side of the unit  
using the 4-40 flat head screws enclosed with the kit.  
040-08249-001C 12/03  
 

Moyer Diebel Dishwasher 201HT User Manual
Multi Tech Systems Network Card EN60601 User Manual
Nextar Digital Photo Frame N7 105 User Manual
Nikon Camera Lens 1989 User Manual
Onkyo CD Player CBX 300 User Manual
Onkyo Stereo Receiver TX NR747 User Manual
Oster Electric Shaver 78182 User Manual
Panasonic Computer Drive LF D102U User Manual
Panasonic DVD Player CF VDR301U User Manual
Panasonic Portable Generator LC R063R4P User Manual