La Crosse Technology Portable Radio WS 9005TWC User Manual

WS-9005TWC  
915MHz  
WIRELESS RAIN GAUGE  
INSTRUCTION MANUAL  
 
INTRODUCTION  
Thank You and Congratulations on your purchase of this innovative Wireless  
Rain Gauge for display of rainfall data through a wireless rainfall sensor. With  
2 easy to use function keys, this unique product is perfect for gardeners and  
weather buffs alike.  
This product offers:  
INSTANT TRANSMISSION is the state-of-the-  
art new wireless transmission technology,  
exclusively designed and developed by  
LA CROSSE TECHNOLOGY. INSTANT  
TRANSMISSION offers you an immediate  
update (every  
outdoor data  
6
seconds!) of all your  
measured from the  
transmitters: follow your climatic variations  
in real-time!  
Wireless Rain Gauge (Receiver)  
Total Rainfall  
Light Rain &  
Heavy Rain (shown)  
Indicators  
User Defined  
Rainfall Alarm  
Low  
Battery Indicator  
Rainfall for  
Past 24 Hours  
RESET/+  
Button  
ALM/SET  
Button  
FEATURES  
915 MHz Instant Data Transfer: Updates every 6 seconds  
Total Rainfall for Last 24 Hours  
User Defined Total Rainfall  
Current Rainfall Indicator, Light Rain & Heavy Rain Indicators  
Low Battery Indicator for Both Receiver & Rain Sensor  
Wall Hanging or Free Standing  
3
 
SETTING UP  
Hint: Use good quality Alkaline Batteries; avoid rechargeable  
batteries.  
1. Have the receiver and the rain gauge 3 to 5 feet apart.  
2. Place the batteries into the rain gauge FIRST and next into  
the receiver. Observing the correct polarization, insert 2 “AAA”  
Alkaline Batteries into the compartment at the back of the rain  
gauge and replace the cover. Follow the same guidelines for  
the receiver.  
Rain Gauge  
Cover  
Remove cover to  
access battery  
compartment inside  
Battery  
Compartment  
Battery  
Cover  
Receiver  
4
 
3. DO NOT PRESS ANY BUTTONS FOR 15 MINUTES.  
4. All segments of the LCD will light up briefly. Then 0.00 inch  
will be displayed in both sections of the LCD If the “0.0” is not  
displayed after a few seconds, remove the batteries and wait  
for at least 10 seconds before reinserting them.  
5. Place the rain gauge in an appropriate location. The rain  
gauge should be placed in a secure and flat location where it  
can properly collect properly rain quantity without obstruction.  
The rain gauge has a range of 330 feet. Keep in mind that the  
330 feet is in open air with no obstructions and that radio  
waves DO NOT curve to go around objects. Real-world  
transmission range will vary depending on what is in the path  
of the signal. Each obstruction (roof, walls, floors, ceilings,  
thick trees, etc.) will effectively cut signal range in half.  
Example: A wireless rain gauge receiver with a 330 feet  
range is mounted on an interior wall, so that the signal has to  
pass through one interior wall, one exterior wall, and across  
the 10 foot width of the room between the 2 walls. The first  
wall will reduce the range to 165 feet, and the second wall will  
reduce the range to 87 feet. Factoring in the 10 foot room, this  
leaves a maximum of 77 feet of remaining signal range.  
This allowance is typically enough for a frame wall with non-  
metallic siding; however certain materials can reduce range  
even further. Metal siding, stucco, and some types of glass  
can reduce signal range by as much as ¾ or more, compared  
to the ½ reduction typical of most obstructions. It is possible to  
receive a signal through these materials, however maximum  
range will be much less due to their tendency to absorb or  
reflect a much larger portion of the sensor’s signal.  
Note:  
When opening the battery cover make sure that the batteries do  
not spring free from the contacts since this will cause start and  
transmission problems.  
5
 
Battery Change:  
It is recommended to replace the batteries in the unit  
approximately every 3 years to ensure optimum accuracy.  
FUNCTION KEYS  
The simple design of this product features 2 keys.  
RESET/+ Key:  
Press for 5 seconds to reset the TOTAL rainfall data “0”.  
Press and release to advance the value for the alarm.  
ALM/SET:  
Press for 2 seconds to activate/deactivate alarm  
Press for 5 seconds to enter alarm setting  
OPERATIONS  
Setting the Alarm  
Press and hold the ALM/SET button until the alarm is flashing  
on the bottom screen.  
Advance the alarm value by pressing and releasing the  
RESET/+ button.  
Alarm can be set in 0.05” increments from 0.05” to 4.00”  
The icon ((•)) will appear when the alarm is turned ON.  
Press and release ALM/SET button to turn the alarm off.  
To view the alarm pres and hold the ALM/SET button. This  
will cause the receiver to beep if the set alarm value has  
already been reached.  
Resetting TOTAL RAINFALL and 24 HOUR RAINFALL  
Total Rainfall: Press and hold the RESET/+ button. The  
receiver will beep, and the total rainfall will reset to 0.00”.  
24 Hour Rainfall: The 24 Hour Rainfall will reset to 0.00”  
every 24 hours. To reset the 24 Hour Rainfall to 0.00” in-  
between the 24 hour automatic reset, you must remove the  
batteries, wait 2 minutes, and then re-insert the batteries.  
Note: Removing the batteries will reset the Total Rainfall as well  
as the 24 Hour Rainfall.  
6
 
Light Rain/Heavy Rain Indicator  
The wireless rain gauge features 2 rain level indicators: Light  
Rain and Heavy Rain.  
Light Rain: Indicated by 3 clouds and  
rain with no animation.  
The Light Rain icon will appear if any rain  
is registered over the past 10 minutes.  
Heavy Rain: Indicated by 3 clouds with  
animated rain.  
The Heavy Rain Icon will appear if more  
than 10 counts (0.2”) have been  
registered over the past 10 minutes.  
Low Battery Indicators (RX & TX)  
RX: Indicates the receiver battery is low.  
TX: Indicates the rain gauge battery is low.  
MOUNTING  
Positioning the Receiver:  
The Receiver can be positioned on a flat surface or on a wall.  
Foldout Table Stand  
The foldout table stand is located on the backside of the Receiver.  
Carefully pull out the stand and place the Receiver in the desired  
location.  
Wall Mounting  
Place a screw in the desired location leaving the head extended  
about ¼” from the wall. Hang the Receiver on the screw ensuring  
that the Receiver locks into place.  
Hangin  
Hanging  
Hole  
7
 
Positioning the Rain Gauge  
Position the connected rain gauge outdoor to collect rainfall data.  
Ensure that the rain gauge is placed in a secure and flat location  
where it can properly collect properly rain quantity without  
obstruction. Ensure also that the rain gauge is securely mounted  
at the appropriate location otherwise it may not transmit accurate  
rainfall data.  
The rain gauge must be level to transmit correct readings. It is  
recommended to mount the rain gauge 3 feet or higher off of the  
ground. Screw the rain gauge down snugly in the holes provided  
(but not too tight as this will affect the accuracy of the gauge).  
Top View  
Holes  
for screws  
Side View  
MAINTENANCE  
9 Avoid placing the units in locations prone to extreme  
temperatures, vibration and shock since these may cause  
damage and inaccurate readings.  
9 When cleaning the display and casing of the Wireless Rain  
Gauge Receiver, use a soft damp cloth only. Do not use  
8
 
solvents or scouring agents as they may mark the casing and  
LCD.  
9 Do not submerge the Wireless Rain Gauge in water.  
9 Immediately remove all low powered batteries to avoid leakage  
and damage. Replace only with new batteries of the  
recommended type.  
9 Please do not make any attempt to make any repairs to the  
units. Return them to their original point of purchase for repair  
by qualified personnel. Opening and tampering with the units  
will invalidate the warranty.  
SPECIFICATIONS  
Rainfall  
User defined from 0.05” to 4.00”  
over 24 hour period  
Rainfall Alarm  
Rainfall Range  
Unit Display  
0.00” to 787” (total)  
Inch  
Transmission Range  
330 Feet  
915 MHz, updating every 6  
seconds  
Transmission  
Power Supply:  
Receiver:  
Rain Gauge:  
Battery life cycle:  
2 x AA, IEC LR6, 1.5V.  
2 x AAA, IEC LR3, 1.5V.  
Approximately 36 months.  
Recommended battery type: Alkaline.  
Dimensions (L x W x H)  
Receiver:  
Rain Gauge:  
2.91” x 1.15” x 3.86”  
5.67” x 2.15” x 3.46”  
LIABILITY DISCLAIMER  
The manufacturer and supplier cannot accept any  
responsibility for any incorrect readings and any  
consequences occurring should an inaccurate reading take  
place.  
This product is not to be used for medical purposes or for  
public information.  
9
 
This product is designed for strict home use as an indication of  
rain quantities and is not 100% accurate. Readouts given by  
this product should be taken only as an indication and not as  
being totally accurate.  
The specifications of this product may change without prior  
notice.  
This product is not a toy. Keep out of the reach of children.  
No part of this manual may be reproduced without written  
consent of the manufacturer.  
WARRANTY INFORMATION  
La Crosse Technology, Ltd provides a 1-year limited warranty on this product against  
manufacturing defects in materials and workmanship.  
This limited warranty begins on the original date of purchase, is valid only on products purchased  
and used in North America and only to the original purchaser of this product. To receive warranty  
service, the purchaser must contact La Crosse Technology, Ltd for problem determination and  
service procedures. Warranty service can only be performed by a La Crosse Technology, Ltd  
authorized service center. The original dated bill of sale must be presented upon request as proof  
of purchase to La Crosse Technology, Ltd or La Crosse Technology, Ltd’s authorized service  
center.  
La Crosse Technology, Ltd will repair or replace this product, at our option and at no charge as  
stipulated herein, with new or reconditioned parts or products if found to be defective during the  
limited warranty period specified above. All replaced parts and products become the property of La  
Crosse Technology, Ltd and must be returned to La Crosse Technology, Ltd. Replacement parts  
and products assume the remaining original warranty, or ninety (90) days, whichever is longer. La  
Crosse Technology, Ltd will pay all expenses for labor and materials for all repairs covered by this  
warranty. If necessary repairs are not covered by this warranty, or if a product is examined which is  
not in need or repair, you will be charged for the repairs or examination. The owner must pay any  
shipping charges incurred in getting your La Crosse Technology, Ltd product to a La Crosse  
Technology, Ltd authorized service center. La Crosse Technology, Ltd will pay ground return  
shipping charges to the owner of the product to a USA address only.  
Your La Crosse Technology, Ltd warranty covers all defects in material and workmanship with the  
following specified exceptions: (1) damage caused by accident, unreasonable use or neglect  
(including the lack of reasonable and necessary maintenance); (2) damage occurring during  
shipment (claims must be presented to the carrier); (3) damage to, or deterioration of, any  
accessory or decorative surface; (4) damage resulting from failure to follow instructions contained in  
your owner’s manual; (5) damage resulting from the performance of repairs or alterations by  
someone other than an authorized La Crosse Technology, Ltd authorized service center; (6) units  
used for other than home use (7) applications and uses that this product was not intended or (8) the  
products inability to receive a signal due to any source of interference.. This warranty covers only  
actual defects within the product itself, and does not cover the cost of installation or removal from a  
fixed installation, normal set-up or adjustments, claims based on misrepresentation by the seller or  
performance variations resulting from installation-related circumstances.  
LA CROSSE TECHNOLOGY, LTD WILL NOT ASSUME LIABILITY FOR INCIDENTAL,  
CONSEQUENTIAL, PUNITIVE, OR OTHER SIMILAR DAMAGES ASSOCIATED WITH  
THE OPERATION OR MALFUNCTION OF THIS PRODUCT. THIS PRODUCT IS NOT  
TO BE USED FOR MEDICAL PURPOSES OR FOR PUBLIC INFORMATION. THIS  
PRODUCT IS NOT A TOY. KEEP OUT OF CHILDREN’S REACH.  
10  
 
This warranty gives you specific legal rights. You may also have other rights specific to  
your State. Some States do no allow the exclusion of consequential or incidental  
damages therefore the above exclusion of limitation may not apply to you.  
For warranty work, technical support, or information contact:  
La Crosse Technology, Ltd  
2809 Losey Blvd. S.  
La Crosse, WI 54601  
Phone: 608.782.1610  
Fax: 608.796.1020  
e-mail:  
(warranty work)  
(information on other products)  
web:  
All rights reserved. This handbook must not be reproduced in any form, even in excerpts, or duplicated or  
processed using electronic, mechanical or chemical procedures without written permission of the publisher.  
This handbook may contain mistakes and printing errors. The information in this handbook is regularly checked  
and corrections made in the next issue. We accept no liability for technical mistakes or printing errors, or their  
consequences.  
All trademarks and patents are acknowledged.  
11  
 

Lennox Hearth Printer PB42 User Manual
Leviton Switch HXC4D 1TW User Manual
LG Electronics Microwave Oven MC 767W User Manual
Lightolier Work Light C7E17VW User Manual
Linear Telephone PD 2 User Manual
Makita Grinder 9564 4 1 2 User Manual
Maytag Dishwasher DU929QWDB0 User Manual
Meade Telescope ETX LS User Manual
Meridian America CD Player G082 User Manual
M Systems Flash Disk Pioneers Network Card DiskOnChip 9x12 BGA to 32 Pin DIP Adapter User Manual