i455
Series
Start Here
Easy Setup Instructions
Desktop Photo Printer
Connect the Printer
and Load Paper
1
Unpack the Printer
2
Prepare the Printer
3
Install the Print Head
4
Install the Ink Tanks
5
1
1
1
1
1 Remove the print head from its package.
Carefully remove all items from the box.
Remove all shipping tape from the front
and back of the printer.
Remove the black ink tank (BCI-24 Black)
from its package and pull off the orange
protective cap.
Turn the printer off.
IMPORTANT: Be sure the printer
is off before continuing, or the
computer will attempt to install
the printer driver before the
printer is ready.
NOTE: Avoid ink at the bottom of the tank.
Protective Cap
Tear at notch to open
2
Connect one end of a USB cable to
the computer, the other to the printer.
Shipping
Tape
2
Remove the orange protective cap.
NOTE: Do not touch the electrical contacts
or the print head nozzles.
2
Plug the power cord into the back of the
printer and connect the other end to a
power outlet.
i455 Series
Desktop Photo Printer
2
Insert the black ink tank into the slot on
the right, then push in until the ink tank
clicks into place.
IMPORTANT: For correct printer
operation, make sure ink tanks
are secure in slots.
Electrical
Contacts
Print Head
Nozzles
Paper Rest
3
3
Press the Power button. The printer will
Raise the gray lock lever on the printer.
initialize.
Power
Lamp
USB Port
Power
Button
USB Cable
3
Pinch the paper guide and slide it to the
left. Load a sheet of blank paper in the
paper rest. Slide the guide toward the
left edge of the paper.
3
Repeat the procedure for the color ink
tank (BCI-24 Color), inserting it into the
remaining slot.
Documentation
and Software Kit
4
Open the output tray, then open the front
cover. The print head holder automatically
moves to the center.
4
Slide the print head into the holder until
it is securely seated.
Do not press it down.
Paper
Guide
i455 Series Print Head
Power Cord
4
Close the front cover, attach the paper rest
and pull out the output tray.
Front Cover
Paper Rest
Output Tray
5
Lower the lever until it clicks into place.
Ink Tanks
BCI-24 Black
BCI-24 Color
Continue with Step 6
on side two.
Output Tray
Serial Number
Click
5
Write down the serial number located to
the right of the print head holder. You will
need this later to register the product.
NOTE: The printer will perform a print
head cleaning after the cover is closed.
|