iHome MP3 Docking Station ID28 User Manual

Model iD28  
App-enhanced Portable  
Rechargeable System for  
iPad ®, iPhone® and iPod ®  
works with  
iHome + Sleep  
alarm clock app  
iHome + Radio  
internet radio app  
download QR code  
reader app and scan  
Note: iHome+Sleep and iHome+Radio apps are not covered in detail in this booklet. To learn more about how  
these apps can enhance your experience, please download the free iHome+Sleep app from the App Store and  
review the Start Guide.  
 
FCC Information  
This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions:  
(1) This device may not cause harmful interference, and (2) this device must accept any interference  
received, including interference that may cause undesired operation.  
This equipment complies with the limits for a Class B digital device as specified in Part 15 of FCC Rules. These limits  
provide reasonable protection against radio and TV interference in a residential area.  
However, your equipment might cause TV or radio interference even when it is operating properly. To eliminate interference  
you can try one or more of the following corrective measures:  
• Reorient or relocate the receiving antenna.  
• Increase the distance between the equipment and the radio or TV.  
• Use outlets on different electrical circuits for the equipment and the radio or TV.  
• Consult your dealer or an experienced radio/television technician if the problem still exists.  
Modifying or tampering with your systems internal components can cause a malfunction and might invalidate the systems  
warranty and void your FCC authorization to operate it.  
This Class B digital apparatus complies with Canadian ICES-003.  
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.  
Maintenance  
• Place the unit on a level surface away from sources of direct sunlight or excessive heat.  
• Protect your furniture when placing your unit on a natural wood and lacquered finish. A cloth or other protective material  
should be placed between it and the furniture.  
• Clean your unit with a soft cloth moistened only with mild soap and water. Stronger cleaning agents, such as Benzene,  
thinner or similar materials can damage the surface of the unit.  
 
Controls and Indicators  
Front Panel  
Speaker  
Speaker  
Retractable Dock  
Top Panel  
Clock Sync Button  
Bedtime Button  
EQ Button Wake Up Button  
Presets Button  
Alarm Button  
Power Button  
Snooze / Dimmer  
Button  
Volume Up Button  
Volume Down Button  
Forward Button  
Radio/Aux Button  
Reverse Button  
Play/Pause Button  
1
 
Controls and Indicators  
Rear Panel  
Back Up Battery  
compartment  
Radio stereo/mono switch  
Adaptor Jack  
FM antenna /  
Aux line-in Jack  
Fold out stand  
Fold out stand  
DST Switch  
Remote auto/on switch  
Reset Button  
FM antenna/Aux line-in Jack (at Rear Panel)  
FM antenna/Aux line-in Jack  
FM antenna  
Display  
Time Display  
PM Indicator  
SRS Indicator  
iHome App Indicator  
Rechargeable Battery Status Indicator  
Low Backup Battery Indicator  
Alarm Indicator  
Preset / iPod / Radio / AUX / Wake-to / Sleep indicators  
2
 
iD28 Quick Start  
1:Stand  
2:Power  
RESET  
R E S E T  
TEST  
T E S T  
Plug the AC adapter into the adapter jack on the rear of the  
unit and the other end into a working outlet. The first time  
you connect the unit you should let it charge the internal  
battery completely (about 5 hours).The internal battery (and  
docked iPhone/iPad/iPod) will charge.  
Fold out the stand feet on the bottom of the unit, then  
turn unit upright for operation.  
3:iPhone/iPad/iPod  
4:Time Sync  
Press clock sync  
• Make sure unit is OFF and iPhone/iPad/iPhone  
is docked  
• Press and release the Clock Sync Button on  
the top left of the unit. “SYNC” will flash in the  
display, followed by 2 beeps indicating time  
sync was successful.  
• If “FAILED” appears on the display and a long  
beep sounds, sync was unsuccessful. Try again  
with a different iPhone/iPad/iPod, or set clock  
manually (see page 7).  
• Press on the iHome logo on front of the unit to release the  
dock (press in for travel)  
• Gently dock playing iPad/iPhone/iPod. The unit will turn on  
and your audio will play through the unit.  
• Press the or  
Buttons to adjust volume  
• Press the EQ Button to cycle to Treble, Bass and SRS,  
press  
or  
to adjust settings.  
• Press the  
Button to turn unit off.  
3
 
iD28 Quick Start  
5:Radio  
• Attach included FM antenna to FM Antenna/Aux line-in jack on back of unit  
• Press and release the Radio/AUX Button as needed to select FM radio mode.  
• Press and release the  
or  
Buttons to tune radio to desired station; press and hold briefly to scan to next  
clear station  
• See page 9 for information on setting FM presets  
4
 
Getting Started  
Thank you for purchasing the iD28. Designed specifically to work with your iPhone, iPad and iPod, and with iHome apps like  
iHome+sleep and iHome+radio this system provides high quality audio performance that brings out the best in your music  
and lets you wake and sleep to it anywhere. These instructions do not cover the use of apps. For more on using this unit with  
iHome apps, please visit iHomeaudio.com/apps or look for iHome in the App Store.  
Please read these instructions carefully before operating the unit and keep them for future reference.  
Connect AC Adaptor  
Connect the AC adaptor cable plug into the DC jack on the back of the system, then plug the AC adaptor into a working  
outlet. While connected to AC power, the iD28 will charge your docked iPhone, iPad or iPod as well as the internal lithium ion  
battery until fully charged.  
Installing/Replacing the Clock Backup Battery  
Note: The CR2032 lithium battery is included in the unit. Please pull out the battery pull tab before you use the unit.  
This model is equipped with a battery backup circuit that will maintain the time and alarm time settings, as well as the radio  
station preset memory settings and EQ settings in the event of a temporary power interruption. The battery backup circuit will  
also operate the buzzer alarm to wake you up even if the power is out at the selected wake up time. The battery backup  
circuit requires one CR2032 lithium battery, included.  
When the backup battery is getting weak the Low Backup Battery Indicator will begin flashing in the display. When you see  
this flashing indicator you should replace the backup battery as soon as possible. Purchase a replacement CR2032 battery,  
available wherever batteries are sold, and follow steps 1 through 4 below to install the replacement battery.  
To replace the backup battery:  
IMPORTANT: When replacing the backup battery be sure to have the unit connected to the AC outlet to maintain all of your  
settings, otherwise it will be necessary to reset the time, alarm time, radio presets, and EQ settings after the  
battery is replaced.  
1. Locate the battery backup holder found on the rear of the unit towards the top center.  
2. Pinch the locking tab on the right of the battery holder toward the center of the battery  
holder to unlock it and insert a thumbnail into the slot in and pry gently outwards to  
remove the battery holder.  
3. Insert a fresh CR2032 battery in the backup battery holder with the “+” side facing up, as  
illustrated.  
4. Replace the battery holder and confirm that the backup battery indicator  
flashing in the display.  
is not  
Note: Make sure you dispose of battery properly (see your local regulations).  
WARNING: Lithium batteries can explode or cause burns if disassembled, shorted, recharged, exposed to water, fire,  
or high temperatures. Do not place loose batteries in a pocket, purse, or other container containing metal  
objects, mix with used or other battery types, or store with hazardous or combustible materials. Store in  
cool, dry, ventilated area. Follow applicable laws and regulations for transport and disposal.  
5
 
Charging the Internal Battery  
Your unit comes with an internal lithium ion battery for portable operation. As noted above, the internal battery charges when  
the unit is connected to AC power. A battery status indicator is located to the right of the clock display. When the indicator  
is low and flashing, you will need to connect the unit to AC power to recharge the battery. When the indicator is full and steady  
(not flashing), the battery is fully charged.  
End-Of-Life Battery Disposal Instructions  
This device uses a Lithium-ion battery that should last the lifetime of the device. If you suspect your battery may be dead, try  
charging it several times. If the battery does not recharge, please contact us for repair information. Please do NOT attempt  
to change the battery yourself. If the battery has died and you do not want us to replace your battery, you should follow the  
disposal instructions below.  
Consult local laws and regulations for proper battery disposal in your region. If there are no local regulations concerning  
battery disposal, please dispose of the device in a waste bin for electronic devices.  
Caution: The Battery used in this device may present a risk of fire, explosion or chemical burn if mistreated  
Battery shall not be exposed to excessive heat such as sunshine, fire, or the like. Do not use or charge the battery if it appears  
to be leaking, discolored, deformed, or in any way abnormal. Do not leave your battery discharged or unused for extended  
periods of time. When batteries are misused, they may explode or leak, causing burns and personal injury. If your battery  
leaks, use normal precaution and discard the battery immediately.  
Resetting the iD28  
Your iD28 was designed with a special surge protection circuit to prevent permanent damage  
to the unit in the event of an unexpected power surge. If your unit appears to be ‘locked up’  
and is not operating normally, and you know that the battery is properly charged, use a  
straightened paper clip, toothpick, or similar object to press the RESET button, located on the  
back panel next to the AC jack. This will unlock the unit and restore the original factory default  
settings.  
6
 
Setting Up the Unit  
Updating your Firmware  
To update the firmware on this unit to the latest version, please download the free iHome+Sleep app from the app store.  
Launch the app and follow directions for updating the firmware for this unit if available.  
Docking your iPhone, iPad or iPod  
1. Press on the iHome badge on the front of the unit to release the retracting dock (press in again for travel).  
2. Carefully place your iPhone/iPad/iPod into the dock.  
Setting the Clock  
Setting the Time and Calendar using iPhone/iPad/iPod Time Sync  
Time sync mode allows you to sync the unit to the time and calendar from your iPhone, iPad or recent models of iPod like  
iPod Touch, iPod Nano and iPod Classic (older models such as iPod Mini do not support this feature).  
1. Make sure your iPhone, iPad or iPod is properly docked and the unit is OFF. Press and release the Clock Sync Button  
located on the top left of the unit. “SYNC” will flash on the display, indicating sync function is in progress.  
2. After sync is complete, the display will show the current time and two beeps will confirm time sync is done.  
3. If time sync fails, “FAILED” appears on the display a long beep sounds and the unit exits time sync mode. Try using a  
different iPhone/iPad/iPod to attempt syncing again or set time manually (see below).  
NOTE: The iPhone is constantly updated to current time via cell phone towers. The time on your iPad or iPod is only  
accurate to the last time it was synced to a computer. Its possible to have up to 59 seconds difference between the unit and  
synced iPhone/iPad/iPod.  
Setting Time and Calendar Manually  
1. Set the DST Switch located on the back of the unit to +1 to add one hour or to -1 to subtract an hour to account for  
daylight saving time or standard time  
2. Press and hold the Clock Sync Button until the hour display flashes. Press the  
or  
button to set the correct hour  
(press and hold for rapid advance). Remember to set the correct AM or PM time. The PM Indicator is located to the  
upper left side of the time digits; there is no AM indicator.  
3. Press the  
Alarm Button at any time during clock setting to toggle the display between 24 hour (military) and 12 hour  
(standard) display mode. The PM indicator will not appear when display is in 24 hour mode.  
4. Press the Clock Sync Button. The minutes will flash. Press the  
5. Press the Clock Sync Buttonn. The year will flash. Press the  
or  
button to set the current minutes.  
button to set the current year.  
button to select the current date (press and hold  
or  
or  
6. Press the Clock Sync Button. The date will flash. Press the  
to enter fast scroll mode).  
7. Press the Clock Sync Button again (or no button press within 10 seconds) to exit the clock setting mode. 2 beeps will  
confirm clock setting is complete.  
 
7
Using the Alarm  
Setting the Alarm  
1. Press and hold the  
Alarm Button until the alarm icon and alarm hour flashes on the display.  
2. Press the  
or  
Button to set the desired alarm hour. Remember to set the correct AM or PM alarm time. The PM  
Indicator is located to the upper left side of the time digits; there is no AM indicator.  
3. Press the  
Button. The minutes will flash. Press the  
or  
button to set the desired alarm minutes.  
4. Press the  
Button. Press the or button to set the alarm schedule. 7 days = everyday, 5 days = weekdays and  
2 days = weekends only.  
5. Press the Button to select wake to sound source. Press the  
or  
Button to cycle through alarm sources: iPod  
(includes docked iPhone, iPad or iPod), custom iHome Playlist, FM radio or buzzer (you cannot wake to aux audio  
device).  
To wake to a custom playlist, you must first create a playlist in iTunes, name it “iHome” and import it into your  
iPhone/iPad/iPod. The playlist will wake you to random songs within the iHome playlist.  
6. Press the Alarm Button (or no button within 10 seconds) to exit alarm setting mode. Two beeps will confirm you have  
completed Alarm setting mode. The alarm will be armed, indicated by the alarm icon  
Note: If iPhone/iPad/iPod or FM radio are wake-to source and unit detects no sound for around 30 seconds (or if no  
iPhone/iPad/iPod is detected), the buzzer will sound instead and iPhone/iPad/iPod will power down.  
Review, Arming and Disarming Alarm (Turn Alarm Function On and Off)  
To review the current alarm time and arm the alarm or to disarm the alarm, just press the Alarm Button as needed. When  
the alarm is armed, the alarm icon and current alarm settings appear. When the alarm is sounding, press the  
Button to turn it off and cancel alarm mode.  
Alarm  
Resetting the Alarm to Come on the Next Day  
When the alarm is sounding, press the Button or the Wakeup Button to stop the alarm and reset it to come on the follow-  
ing day at the same time.  
TIP: Download the iHome+Sleep app free on the App Store for enhanced custom alarms and more  
Sure Alarm  
The unit has a sure alarm feature. If you have installed the backup battery, the buzzer alarm will still sound in the event of  
power failure or if the internal battery is completely discharged.  
Snooze/Dimmer  
The unit has a programmable snooze.  
1. Press and hold the Snooze/Dimmer Button during normal operation until the display flashes. Press the  
or  
Button to set the snooze time between 1 and 29 minutes. Press the Snooze/Dimmer Button (or no button within 10  
seconds). 2 beeps will confirm snooze setting is complete.  
2. When the alarm is sounding, press the Snooze/Dimmer Button to silence the alarm for the set snooze time. The  
alarm will sound again once the snooze time has elapsed. You can press snooze several times during the 1 hour alarm  
cycle.  
3. Press the Snooze/Dimmer Button during normal operation to step through the display dimmer settings: High,  
medium, low and off.  
 
8
Listening to iPhone/iPad/iPod  
1. Gently dock an already playing iPhone, iPad or iPod. The unit will automatically turn on and you will hear the audio playing  
from your iPhone/iPad/iPod.  
Note: If the playing audio loudness is too low on the iPhone/iPad/iPod, the iD28 may not detect that the  
iPhone/iPad/iPod is in play mode. Press the  
2. Press the or Button to change iPod/iPhone track forward/reverse.  
3. When the iPhone/iPod is docked and in standby mode, press the Button to play it.  
4. When the iPhone or iPod is in play mode, press the Button to pause play; press again to resume play.  
6. Press the Volume or Button to adjust the unit volume.  
7. Press the eq Button as needed to cycle through treble, bass and SRS™ sound settings. Press the  
adjust settings for best sound. When the SRS circuit is switched 'On' the SRS indicator will appear in the display.  
8. To turn off the unit, press the Button. Your iPhone/iPod will continue charging while in the dock if unit is connected to  
AC power. It will not charge when running on internal battery.  
Button to play it.  
or  
Button to  
Listening to FM Radio  
Setting up the Antenna  
Insert the FM Antenna plug into the Aux-in/FM Antenna Jack on the back of the unit. Extend the wire antenna fully for best  
reception. Do not strip, alter or attach to other antennas.  
Tuning and Playing the FM Radio  
1. Press the Radio/AUX Button as needed to turn the unit on and toggle between FM radio and aux-in modes. Select FM  
Radio mode. The last selected radio station will play and the frequency will appear in the display.  
2. Press the  
release) will seek the next clear FM radio station.  
3. Press the Volume or Button to adjust the volume setting.  
or  
Button to tune radio to a desired station. Pressing and holding the  
or  
Button (2 sec. then  
4. If needed, move the radio mono/stereo switch located on back of the unit to mono to improve reception/signal.  
5. To turn off the unit, press the  
Button. iPhone/iPod will continue charging while in the dock.  
Setting and using FM Presets  
You can set and save up to 6 radio station presets in memory.  
1. To set a station as a preset, enter FM radio mode (see above).  
2. Press the Presets Button as needed to step through the presets (1 - 6) to the desired preset number.  
3. Press and hold the Presets Button until the display flashes, then press the  
for the preset number (press and hold or briefly to scan to the next clear FM station).  
4. Press the Presets Button to confirm your preset. To continue setting presets, follow steps 2-3 above).  
or  
Button to tune to the desired station  
9
 
Listening to FM Radio  
Setting FM Radio Frequency/Range to Use Unit in Other Countries  
Different regions of the world use different FM radio frequency steps and ranges. You will need to select the one that matches the  
standards in your region (USA, EUROPE, JAPAN, AUSTRALIA,or CHINA). The default setting is USA; if you live in the US, you  
may skip this section.  
1. Make sure the unit is OFF (not playing in any mode). Press and hold the Radio/AUX Button for about 5 seconds until  
“USA” flashes in the lower part of the display. Press the  
or  
Button to select your region (EU=Europe, JPN= Japan,  
AUS=Australia, CHN= China).  
2. Press the Radio/AUX Button again (or no button within 5 seconds) to exit the radio frequency setting mode. Two beeps  
will confirm the setting is complete.  
Using the Aux Line-In Jack with Other Audio Devices  
The unit has an FM antenna/aux line-in jack that lets you play other audio devices through it. Unplug the FM antenna to use  
the aux line-in jack.  
1. Plug one end of a standard 3.5mm audio patch cord (not included) into the headphone or line-out jack on your audio  
device and the other end of the patch cord into the aux line-in Jack, located on the rear of the unit.  
2. Press the Radio/AUX Button until “AUX-IN” appears in the display, indicating aux mode is active.  
3. Turn on and play your device (device must be controlled independently of the iD28).  
4. Press the Volume  
or  
Button to adjust the system volume. Adjust the output volume on your device if needed.  
Button. Please remember to turn off your device, too.  
5. To turn off the unit, press the  
Using the Sleep Timer  
The unit has an adjustable sleep timer that lets you sleep to your iPad/iPhone/iPod or FM radio before shutting off after the  
specified time.  
1. Select and play the audio source you wish to sleep to (iPad/iPhone/iPod or FM radio).  
2. Press the Bedtime Button as needed to cycle through the sleep time settings: 90, 60, 30, 15 minutes or OFF (cancels  
sleep mode and turns unit off). Press the Bedtime Button during sleep operation to review the sleep time remaining.  
3. Press the Volume  
or  
Button to adjust the sleep volume. This is separate from the units standard volume  
setting.  
4. To turn off the unit, press the  
Button.  
Using the Remote auto/on Switch  
The unit has a remote auto/on switch located on the back of the unit. Slide the switch to the AUTO position to save battery  
power when traveling or operating on the internal battery. AUTO disables remote operation when operating on the internal  
battery. Slide switch to ON position for normal remote operation.  
10  
 
A Consumer Guide to Product Safety  
When used in the directed manner, this unit has been designed and manufactured to assure your personal safety.  
However, improper use can result in potential electrical shock or fire hazards. Please read all safety and operating  
instructions carefully before installation and use. Keep these instructions handy for future reference. Take special  
note, and adhere to all warnings on the unit and in the instruction and service manual.  
1. Water and Moisture – The unit should not be used near water. For example, near a bathtub, washbowl,  
kitchen sink, laundry tub, in a wet basement, or near a swimming pool, etc.  
2. Ventilation – The unit should be situated so that its location or position does not interfere with its proper  
ventilation. For example, it should not be situated on a bed, sofa, rug, or similar surface that may block the  
ventilation openings; or placed in a built-in installation, such as bookcase or cabinet that may impede the flow of  
air through the ventilation openings.  
3. Heat – The unit should be situated away from heat source such as radiators, heat register, stoves, or other  
appliances (including amplifiers) that produce heat.  
4. Power Sources – The unit should be connected to a power supply only of the type described in the operating  
instructions or as marked on the appliance.  
5. Power Cord Protection – Power supply cord should be routed so that they are not likely to be walked on or  
pinched by items placed upon or against them. It is always best to have a clear area from where the cord exits  
the unit to where it is plugged into an AC outlet.  
6. Cleaning – The unit should be cleaned only as recommended by the manufacturer.  
7. Object and Liquid Entry – Care should be taken so that objects do not fall and liquids are not spilled into the  
enclosure through openings.  
8. Attachments – Do not use attachments not recommended by the product manufacturer.  
9. Lightning and Power Surge Protection – Unplug the unit from the wall outlet and disconnect the antenna or  
cable system during a lightning storm or when it is left unattended and unused for long periods of time. This will  
prevent damage to the product due to lightning and power-line surges.  
10. Overloading – Do not overload wall outlets, extension cords, or integral convenience receptacles as this can  
result in a risk of fire or electric shock.  
11. Damage Requiring Service – The appliance should be serviced by qualified service personnel when:  
A. The power-supply cord or plug has been damaged.  
B. Objects have fallen into or liquid has been spilled into the enclosure.  
C. The unit has been exposed to rain.  
D. The unit has been dropped or the enclosure damaged.  
E. The unit exhibits a marked change in performance or does not operate normally.  
12. Antenna – Do not connect an external antenna to the unit (other than that provided).  
13. Periods of Nonuse – If the unit is to be left unused for an extended period of time, such as a month or longer,  
the power cord should be unplugged and take out batteries from the unit to prevent damage or corrosion.  
14. Servicing – The user should not attempt to service the unit beyond that described in the users operating  
instructions. All other servicing should be referred to qualified service personnel.  
For any other questions: 1-800-288-2792 Toll Free  
11  
 
Troubleshooting  
Solution  
Symptom  
Possible Problem  
Plug the AC adaptor into a wall outlet and plug the connector into  
the supply jack on the unit  
AC adaptor isn’t plugged to a wall outlet or  
the connector is not plugged into the power  
supply jack o the back of the unit  
Unit doesn’t  
respond  
(no power)  
Plug another device into a wall outlet (same outlet) to confirm the  
outlet is working  
Wall outlet is not functioning  
Internal battery is dead/needs charging  
Connect AC adaptor to working outlet to charge battery  
Phone/iPad/iPod  
does not dock  
properly  
Remove your iPhone/iPad/iPod from the dock and check for  
obstruction on the connectors in the dock and on your device. Then  
reseat it in the dock.  
iPhone/iPad/iPod is obstructed  
iPhone/iPad/iPhone is not docked properly  
Remove your iPhone/iPad/iPod from the dock and check for  
obstruction on the connectors in the dock and on your device. Then  
reseat it in the dock.  
iPhone/iPad/iPod  
does not respond to  
the unit  
Your iPhone/iPad/iPod software is too old  
Upgrade software on your iPhone/iPad/iPod via iTunes  
iPhone/iPad/iPod is locked up  
Please make sure your iPhone/iPad/iPod is working properly before  
dock into the unit. Please refer to your iPod manual for detail.  
Using 3rd generation iPod  
iD28 doesn’t support 3rd generation iPod  
iPhone/iPad/iPod is not docked properly  
Remove your iPod/iPhone from the dock and check for obstruction  
on the connectors in the dock and on your iPod/iPhone. Then  
reseat it in the dock.  
iPhone/iPad/iPod  
didn’t charge up  
Please make sure your iPod/iPhone is working properly before dock  
into the unit. Please refer to your iPod manual for detail.  
iPhone/iPad/iPod is locked up/frozen  
iPhone/iPad/iPod battery has problem  
Volume level is set too high  
Decrease the volume.  
Sound source is distorted  
If iPhone/iPad/iPod original sound source is poor quality, distortion  
and noise are easily noticed with high-power speakers. Try a  
different music file from a trusted source such as iTunes.  
Sound is distorted  
Try reducing the output volume and EQ settings such as bass boost  
on the device itself.  
Battery is weak or dead  
Replace with new battery  
Remote Control is too far away or not  
Point the Remote Control toward the unit and use within 30 feet of  
the unit.  
Remote control  
doesn’t work  
aimed properly toward the device  
Remote switch is in AUTO position  
Move Remote switch to ON position  
No need for action, operate the unit as usual  
This is normal. The unit has a rechargeable  
battery and charging circuit that may make  
the unit feel warm to the touch when in  
charging mode.  
Unit is/feels warm  
12  
 
Limited 1 Year Warranty Information  
iHome Products, a division of SDI Technologies Inc. (hereafter referred to as SDI Technologies), warrants this product to be free  
from defects in workmanship and materials, under normal use and conditions, for a period of one year from the date of original  
purchase.  
Should this product fail to function in a satisfactory manner, it is best to first return it to the store where it was originally  
purchased. Should this fail to resolve the matter and service still be required by reason of any defect or malfunction during the  
warranty period, SDI Technologies will repair or, at its discretion, replace this product without charge (except for a $20.00  
charge for handling, packing, return UPS/postage, and insurance). This decision is subject to verification of the defect or  
malfunction upon delivery of this product to the Factory Service Center listed below. The product must include proof of  
purchase, including date of purchase. The fee for service without proof of purchase is $60.00.  
Before returning this product for service, please first replace the batteries (if applicable) with fresh ones, as exhausted or defective  
batteries are the most common cause of problems encountered.  
If service is still required:  
1. Remove the batteries (if applicable) and pack the unit in a well padded, heavy corrugated box.  
2. Enclose a photocopy of your sales receipt, credit card statement, or other proof of the date of purchase, if within the warranty  
period.  
3. Enclose a check or money order payable to the order of SDI Technologies, for the sum of $20.00 ($60.00 without proof of  
purchase).  
4. Send the unit prepaid and insured, to the Factory Service Center listed below.  
Consumer Repair Department  
SDI Technologies Inc.  
1330 Goodyear Drive  
El Paso, TX 79936-6420  
Disclaimer of Warranty  
NOTE: This warranty is valid only if the product is used for the purpose for which it was designed. It does not cover (i) products  
which have been damaged by negligence or willful actions, misuse or accident, or which have been modified or repaired by  
unauthorized persons; (ii) cracked or broken cabinets, or units damaged by excessive heat; (iii) damage to digital media players,  
CD’s or tape cassettes (if applicable); (iv) the cost of shipping this product to the Factory Service Center and its return to the  
owner.  
This warranty is valid only in the United States of America and does not extend to owners of the product other than to the original  
purchaser. In no event will SDI Technologies or any of its affiliates, contractors, resellers, their officers, directors, shareholders,  
members or agents be liable to you or any third party for any consequential or incidental damages, any lost profits, actual,  
exemplary or punitive damages. (Some states do not allow limitations on implied warranties or exclusion of consequential  
damages, so these restrictions may not apply to you.) This warranty gives you specific legal rights, and you may also have other  
rights which vary from state to state.  
Your acknowledgment and agreement to fully and completely abide by the above mentioned disclaimer of warranty is contractually  
binding to you upon your transfer of currency (money order, cashier's check, or credit card) for purchase of your SDI Technologies  
product.  
© 2011 SDI Technologies, Inc. All rights reserved  
For any other questions: 1-800-288-2792 Toll Free  
13  
 
iD28-071311-A  
Printed in China  
 

Gravely Lawn Mower 990100 User Manual
Gravely Lawn Mower 89201800 User Manual
Grizzly Drill G0514XF User Manual
Guardian Technologies Portable Generator 005240 User Manual
Haier Washer XPB80 50 User Manual
Harman Kardon Stereo Receiver HK460I User Manual
Havis Shields Telescope C PED Series User Manual
Hearth and Home Technologies Outdoor Fireplace GO35MTCH User Manual
HP Hewlett Packard Power Supply 654xA User Manual
HP Hewlett Packard Projector VP6100 User Manual