Grizzly Styling Iron H0613 User Manual

MODEL H0613  
HAND CRANK  
HOSE REEL  
INSTRUCTIONS  
Mounting  
Use 3/8" hardware through the four holes of the  
hose reel base to firmly secure the assembly to a  
convenient and stable location.  
To reduce the risk of injury when using this  
tool:  
Make sure the incoming air pressure  
does not exceed the maximum rating  
of 250 PSI. Otherwise the fittings could  
crack or explode.  
Assembly  
1. Insert the handle shaft through the handle,  
then secure the assembly to the crank with  
the lock nut and flat washer, as shown in  
Figure 2.  
Protect your eyes by wearing safety  
glasses or a face shield when assem-  
bling and using this hose reel.  
Pressurized air may cause injury to  
exposed body parts. Never expose any  
part of your body to pressurized air.  
Make sure the hose reel is firmly mounted  
to a stable surface before pressurizing.  
Handle  
Swivel  
Valve  
Specifications  
Max. Incoming Air Pressure................... 300 PSI  
Max. Hose Length on Reel .........................50 ft.  
Air Fitting Size .........................................14" NPT  
Base  
Reel Hose  
Plug  
Connection  
Inventory  
Use the list below and Figure 1 to inventory the  
Figure 2. Model H0613 assembly components.  
contents of the shipping box.  
Note: Use Teflon pipe tape or thread seal-  
ant on all threaded connections. Also, do not  
overtighten the connections or you may dam-  
age the threads, resulting in leaks.  
Description  
Qty  
A. Hose Reel Assembly (not shown) .............. 1  
B. Swivel Valve 14" NPT.................................. 1  
C. Threaded Plug 14"....................................... 1  
D. Handle........................................................ 1  
E. Handle Shaft .............................................. 1  
F. Lock Nut 516"-18.......................................... 1  
G. Flat Washer 516" ......................................... 1  
2. Install the threaded plug into the hole in the  
crank, as shown in Figure 2.  
3. Install the swivel valve on the other end of  
the center axle, then connect the incoming air  
supply to it.  
C
D
4. Connect the reel hose to the elbow connec-  
tion shown in Figure 2.  
B
E
5. Turn the air pressure ON, then use soapy  
water to test for leaks. If any are found, turn  
the air pressure OFF and repair the leaks  
before putting the hose reel into operation.  
G
F
Figure 1. Model H0613 small item inventory.  
 

Grizzly Sander G0447 User Manual
Grizzly Saw G0495X User Manual
Grundig CRT Television LXW 68 9620 User Manual
Hamilton Beach Coffeemaker 840160800 User Manual
Hotpoint Microwave Oven S230G DY230G User Manual
HP Hewlett Packard Network Card hn200e User Manual
Hyundai Car Video System H CMD4009 User Manual
IBM Personal Computer PC 300GL User Manual
Igloo Water Dispenser MWC495 User Manual
iHome MP3 Docking Station iH51 User Manual