LZ-EM150 Bracket
Typical mounting on “IN-SWINGING” door
L-Bracket
Armature
Frame
Z-Bracket
Door
In-Swinging
200
40
Application for the Electromagnet:
EM-150
30
6
180
40
48
180
6
Unit:mm
38
Installation Steps of LZ bracket for In-swinging doors
1
2
3
4
Find a mounting location on the
door frame for the L bracket. Make
sure that the door is still closeable.
Tighten the electromagnetic lock
on the L bracket by using the
fixing screw.
Assemble the Z bracket, and make
sure that the Z bracket is adjustable.
Insert the guide pins into the
armature plate.
5
6
7
Finish
Power
Once the position is correct,
Put one rubber washer between
armature plate and the Z bracket.
Turn on the power of EM-Lock,
and let the armature plate bonds
to the EM-lock. Adjust the position
between the Z bracket and the
door frame.
Close the door. Measure the correct
position by bringing the armature
plate close to the contact surface of
the electromagnetic lock.
use the screws to permanently
mount the Z bracket on the door
frame. This should be the last step.
GIANNI INDUSTRIES, INC.
No.306-1, Hsin Shu Road, Hsin Chuang, Taipei,Taiwan 242
TEL: 886-2-2206 9929
E-Mail: [email protected]
Website: gianni.tw
The products are manufactured under an ISO
9001 QC 080000 Certified Quality
Management Program environment back its
product quality, performance and commitment
to customer satisfaction.
FAX: 886-2-2204 6632
&
GP001
Copyright © 2008 Gianni industries, inc. All rights reserved.
DM-CA-LZ-EM150 Ver. C Published on 2008.05.20
|