45138
Wireless Alarm System
Signal Repeater
User’s Manual
Choice
ALERT
™
™
Control all Sensors
& accessories from
nload from Www.Somanuals.com. All Manuals Search And Downl
one location
Before connecting or operating the SIgnal Repeater,
please read these instructions carefully and save
this manual for future reference.
Congratulations
The GE Choice Alert™ Wireless Alarm System is one
of the most affordable and expandable wireless
alarm systems available. You’ll discover the system
offers many features typically found in custom
installed Alarm systems.
The Choice Alert system is reliable and easy-to-use.
With Choice Alert you can select from a line of Sensors
and Accessories; start small and expand as you
need, or create a system that meets all your needs.
The Choice Alert System is protected by Priority
Code Selection technology which provides increased
security and trouble-free wireless connections. It
also guarantees the Control Center will only respond
to signals from your Sensors in and around your home,
and prevents anyone from tampering with
your system.
The user manual explains in simple steps how to
install, use and care for your new Choice Alert
Signal Repeater.
If you have any questions or would like
additional information please visit our web site
Customer Service Group at 1-800-654-8483.
nload from Www.Somanuals.com. All Manuals Search And Downl
ꢁ
Important safeguards
PreCautions
1. Do not attempt to disassemble the Signal Repeater,
unless described in the user’s manual. There are no
user serviceable parts.
ꢀ. Handle with Care – Avoid striking or shaking.
Improper use or storage could damage the Signal
Repeater. Modifying or tampering the device or its
internal components can cause a malfunction and
void the Signal Reapeater’s warranty.
ꢁ. If you feel the Signal Repeater or any part of the
Choice Alert system is not operating correctly or
as described, please contact Customer Service for
assistance (1-800-654-848ꢁ).
WARNING!
Risk of personal injury
- For indoor use only.
- Do not use in wet loactions.
nload from Www.Somanuals.com. All Manuals Search And Downl
4
Introduction
The Signal Repeater will extend the range of the
Choice Alert system up to 150 feet from its location
– Effectively repeating the signal from any Sensor back
to the Control Center should a Sensor be located out
of range. The Signal Repeater does not send or receive
signals to the Silent Alert or Alarm Siren, or from other
Signal Repeaters.
Check List
Identify all the parts before proceeding.
Signal Repeater
nload from Www.Somanuals.com. All Manuals Search And Downl
5
Adding a Signal Repeater
Step 1 - Find an electric outlet
near the Sensor having trouble
communicating with the Control
Center. Make certain the location
is between the Sensor and Control
Center. Plug the Signal Repeater
into the outlet and press the ‘Test’
button on the side of Signal
Test
Repeater. It will send a test signal
out to the Control Center and the
LED indicator on the Signal
Repeater will flash rapidly for
about one second, then go out.
Step 2 - When the Control Center receives the
Signal Repeater’s test signal, it will flash the green
power indicator. This means a confirmation signal
was sent back to the Signal Repeater. Release
all buttons.
nload from Www.Somanuals.com. All Manuals Search And Downl
6
Step 3 - When the Signal Repeater receives the
confirmation signal, the LED indicator will flash,
five times. If the Signal Repeater does not receive
the confirmation signal from the Control
Center, the LED indicator on the Signal Repeater will
not flash. You will need to move the Signal Repeater
closer to the Control Center and retest.
Step 4 - To Ensure the Signal Repeater can receive
the signal from the Sensor, activate the Sensor. The
Signal Repeater’s LED indicator should flash rapidly,
and the Control Center should respond to the
Sensor’s signal.
This process will help you locate the Signal Repeater
to the best (farthest) position from the Control
Center in order to extend the range of the Sensor.
nload from Www.Somanuals.com. All Manuals Search And Downl
7
FCC Warning
Any unauthorized changes or modifications to the equipment
would void the user’s warranty and may conflict with both
state and federal laws. The Choice Alert system complies with
part 15 of the FCC rules. Operation is subject to the following
conditions:
1) The Choice Alert system may not cause
harmful interference.
ꢀ) The Choice Alert system may accept any interference
received including interference that may cause
undesired operation.
NOTE: This equipment has been tested and found to
comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more
of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment
and receiver.
– Connect the equipment into an outlet on a circuit
different from that to which the receiver
is connected.
– Consult the dealer or an
experienced radio/TV technician for help
nload from Www.Somanuals.com. All Manuals Search And Downl
8
WARNING
Limitations of Alarm Products
This product should be tested periodically to make sure
it is working properly. The product, if used properly, may
reduce the risk of burglary, robbery, or other adverse events.
However, JASCO is not an insurer, this product is neither
insurance nor a guarantee that such an event will be
prevented, and users should protect themselves with proper
insurance. JASCO makes no representation that this product
cannot be compromised or circumvented, that it will provide
an adequate warning, or that it will prevent any personal
injuries, property damage, or other losses. Like any alarm
product, including expensive commercial systems, it may be
bypassed, it is subject to compromise, and it may fail to warn
for a variety of reasons, including, but not limited to: improper
installation or positioning; improper maintenance; tampering;
dead or improperly installed batteries; sensing limitations;
component failures; receivers; intrusions may be outside
of a product’s designed range and certain environmental
conditions may impact performance and audible alarm
signals may be outside of hearing range, muted by doors,
walls, and floors, unheard by deep sleepers or the hearing-
impaired, or overwhelmed by other sounds.
nload from Www.Somanuals.com. All Manuals Search And Downl
ꢂ
nload from Www.Somanuals.com. All Manuals Search And Downl
10
nload from Www.Somanuals.com. All Manuals Search And Downl
11
is a trademark of the General
Electric Company and is used under
license to Jasco Products Company
LLC, 10 E. Memorial Road,
Oklahoma City, OK 73114.
This Jasco product comes with a
1 year limited warranty. Visit
45138-1
01/09/08
nload from Www.Somanuals.com. All Manuals Search And Downl
|