PT960BM/WM
GE Profile™ 30" Built-In Double Convection Wall Oven
Dimensions and Installation Information (in inches)
Cutout width
28-1/2'' MIN.
28-5/8'' MAX.
KW Rating
5
C
L
2 x 4 or
9.0
6.8
240V
208V
Cutout depth
23-1/2" MIN
equivalent
runners
Junction box
location
E
Breaker Size
A
40 Amps
40 Amps
240V
208V
B
Suitable
bracing
to support
runners
Conduit
(72"
21-5/8"
over centerline
of cabinet
long)
47" to
bottom of
Note: Cabinets installed adjacent to wall ovens
must have an adhesion spec of at least a 194°F
temperature rating. Electric wall ovens are
not approved for installation with a plug and
receptacle. They must be hard wired in accordance
with installation instructions.
(must support 325 lbs.)
junction box
Cutout height
51-13/16" MIN.
51-15/16" MAX.
D
Cabinet
30"
11/16"-3/4"
1"
A – Overlap of oven over side of edges of cutout
B – Overlap of oven at top and bottom of cutout
Oven
A
C – Overall depth*
23-1/2"
53-3/8"
52-7/8"
29-3/4"
21
D – Overall height with trim
Overall height without trim
E –Overall width
*Depth including door handle is approximately 26-6/10" min. to
26-9/10" max.
Door handle protrudes 3" from door face. Cabinets
and drawers on adjacent 45° and 90° walls should be
placed to avoid interference with the handle.
21" minimum
Door Opening
Allowance
B
Minimum cutout location
12" from the floor.
C
Installation Information: Before installing, consult
installation instructions packed with product for
current dimensional data.
Cabinet
width 30"
MOST 30'' WALL CABINETS CAN BE USED WITH THIS UNIT.
THE OPENING BETWEEN THE INSIDE WALLS MUST BE AT LEAST 28-1/2'' WIDE.
For answers to your Monogram,® GE Profile™ or
GE® appliance questions, visit our website at
ge.com or call GE Answer Center® service,
800.626.2000.
Listed by
Underwriters
Laboratories
Specification Created 1/07
220135
|