PRIMERGY TX100 S1
System configurator and order-information guide
July 2010
Contents
Instructions
Configuration diagram
Configurator
0 System software
I
Basic unit
II Processor
III Memory
IV Graphics
V
Accessible drives
VI RAID Controller
VII Hard disk drives
VIII Communikation/Network
IX Miscellaneous
X
Country specific power cords
Change report
PRIMERGY Server
System configurator and order-information guide
PRIMERGY TX100 S1 Status 2010-06-30
Configuration diagram PRIMERGY TX100 S1
FRONT VIEW
SIDE VIEW
System unit ( I )
Standard
DIMM 2 - B
Power supply
DIMM 1 - B
DIMM 2 - A
XEON
Core2Duo
or Pentium
5.25" x 1.6" CD / DVD drive
5.25"x1.6"
DIMM 1 - A
Memory ( III )
Processor ( II )
Accessible drives (V)
Hard disks ( VI )
Extension slots
Disk Array ( VIII )
Communication/Network ( IX )
2 or 4 HDD Bays
depending on Base unit.
SATA - 3.5"x1"
SATA - 3.5"x1"
SATA - 3.5"x1"
SATA - 3.5"x1"
PCIe x4 (wired x1), notched
possible to plug x16 cards
PCIe x8
lp option available
PCIe x8 (wired x4)
PCI (3.3V) 32-Bit / 33MHz
lp option available
Key:
Included in basic unit
Option
Fujitsu Technology Solutions x86 PRIMERGY Server
3 of 13
System configurator and order-information guide
Start PRIMERGY TX100 S1
Software Configurator 32 bit
PRIMERGY TX100 S1
Status 2010-06-30
with OEM-Software
without OEM-Software
for PRIMERGY Server
for PRIMERGY Server
OEM-SW is bound to HW and
is not allowed to be ordered
separately.
VMware-Software
- VCMS VirtualCenter Management Server
Exception: VMware SW
For all SW products please refer to the corresponding software configurator accessible via
the Extranet under Configuration & Tools, -All configurations, -Software, URL see below.
Linux - Software **)
- Open Enterprise Server ***)
- SuSE Linux ES (OEM): LO
- SuSE Linux ES (Support): LS
- Red Hat EL (OEM): LO
- Red Hat EL (Support): LS
Microsoft - Windows Server 2008: W
-
-
-
-
Windows Web Server 2008
Windows Server 2008 Standard, Enterprise
User, Device Client Access Licenses (CAL)
Terminal Server Client Access Licenses (CAL)
Manageability Software: V**)
Details eg. version numbers are published
in the separate SW-Configurator
Backup-Software /
Application-Software: U
- ARCserve
- openSM2
You'll find single software configurators and release lists (OS-matrix / system management / security) under following addresses:
for internal users:
for partners:
Continue with PRIMERGY
HW configurator
Fujitsu Technology Solutions x86 PRIMERGY Server
4 of 13
System configurator and order-information guide
Start PRIMERGY TX100 S1
Software Configurator 64 bit
PRIMERGY TX100 S1
Status 2010-06-30
with OEM-Software
without OEM-Software
for PRIMERGY Server
for PRIMERGY Server
OEM-SW is bound to HW and
is not allowed to be ordered
separately.
VMware-Software
- VCMS VirtualCenter Management Server
For all SW products please refer to the corresponding
software configurator accessible via the Extranet under
"Configuration & Tools, -All configurations, -Software,
URL see below.
Linux - Software *) **)
Microsoft - Windows Server 2008: W
only
- SuSE Linux ES (OEM): LO
-
-
-
-
Windows Web Server 2008
x86_64 - SuSE Linux ES (Support): LS
- Red Hat EL (OEM): LO
Windows Server 2008 Standard, Enterprise
User, Device Client Access Licenses (CAL)
Terminal Server Client Access Licenses (CAL)
- Red Hat EL (Support): LS
Microsoft - Windows Small Business Server 2008: ROK
-
-
Windows Small Business Server 2008 Standard, Premium
User, Device Client Access Licenses (CAL)
Details eg. version numbers are published
in the separate SW-Configurator
**) Pay attention to the release and ordering information in PRINCE -> Operating System
You'll find single software configurators and release lists (OS-matrix / system management / security) under following addresses:
for internal users:
for partners:
Continue with PRIMERGY
HW configurator
Fujitsu Technology Solutions x86 PRIMERGY Server
5 of 13
System configurator and order-information guide
PRIMERGY TX100 S1 Status 2010-06-30
Start PRIMERGY TX100 S1
Section
Basic unit
I
System unit consisting of:
* Housing including standard power supply (no redundancy)
* Imprint of MAC Adress on system label and delivery note as standard
Systemboard with:
* 4 PCI expansion slots:
1x PCIe x4 (wired x1), notched (posible to plug x16 cards)
1x PCIe x8; fits for lp and fh formfactor cards
1x PCIe x8 (wired x4)
1x long 32Bit / 33MHz (3.3V); fits for lp and fh formfactor cards
* 4 memory slots for up to 8GB (PC2 6400) registered DDR II RAM (ECC), max. 2GB modul per slot
* 2 bays 5.25" for accessible drives
* 2 or 4 LFF (3.5") bays 1" high for no hot plug SATA HD (depending on base unit)
* SATA with up to 4 HDD's over ICH-9R (Chipset)
* ATI ES1000 32MB
* Intel 10/100/1000 Mb/s (82566DM) on-board LAN
Cables included in Base Unit:
1. SATA cabel for CD/DVD
2. 2 or 4 x SATA cabel in basic unit (depending on base unit)
PS/2 mouse
ServerView Suite Software package incl. ServerStart, ServerBooks, Management Software and Updates
External Interfaces:
1x RS-232-C (serial, 9 pins)
1x Centronics (parallel, 25 pins, EPP/ECP compatible) optional
1x keyboard (PS/2)
1x mouse (PS/2)
1x VGA (15 pins)
10x USB 2.0 ( 2x frontside, 6x on rearside, 2x released internal USB Interfaces for backup devices)
1x LAN RJ45
A
Fujitsu Technology Solutions x86 PRIMERGY Server
6 of 13
System configurator and order-information guide
PRIMERGY TX100 S1 Status 2010-06-30
A
S26361-K1326-V101
S26361-K1326-V121
SATA basic unit Floorstand
without CPU and Memory
- Minimum one CPU /
SATA basic unit Floorstand
without CPU and Memory
- Minimum one CPU /
Memory module has to be
selected via CPU /
Memory module has to be
selected via CPU /
Memory order codes
Memory order codes
for up to 2 LFF (3.5") HDD
(2 HDD cables included)
for up to 4 LFF (3.5") HDD
(4 HDD cables included)
S26361-F3301-E5
Be aware of configuration Limits for Energy Star Configuration
Energy Star 5.0 compliance
Limits configuration in accordance
with Energy Star requirements
Put EPA comformity on Label
Use EPA specific BIOS settings
max. 1x per system
max. T9400, 8GB RAM, 2x SATA HDD + 2 SATA/Backup, 2x LAN
only with on-board graphics ATI 32MB
S26361-F3436-E4
no TPM
Disable function for Trusted Platform
Use according to import restrictions
max. 1x per system
B
Fujitsu Technology Solutions x86 PRIMERGY Server
7 of 13
System configurator and order-information guide
PRIMERGY TX100 S1 Status 2010-06-30
B
Section
Processor
II
One of following CPU´s has to be selected
for an orderable basic unit
Dual-Core CPU`s
- 1x 64-bit Intel
Core2 Duo Exx00 (2/3MB SLC) or
Xeon UP (4/6MB SLC)
and heat pipe
occupies socket for one CPU
Pentium DC E5200 2.50GHz 2MB 800MHz FSB (65W)
Pentium DC E5400 2.70GHz 2MB 800MHz FSB (65W)
Pentium DC E6300 2.80GHz 2MB 1066MHz FSB (65W)
Pentium DC E6500 2.93GHz 2MB 1066MHz FSB (65W)
Core2 Duo E7400 2.80GHz 3MB 1066MHz FSB (65W)
Core2 Duo E7600 3.06GHz 3MB 1066MHz FSB (65W)
Xeon UP E3110 3.00GHz 6MB 1333MHz FSB (65W)
Xeon UP E3120 3.16GHz 6MB 1333MHz FSB (65W)
Quad-Core CPU`s
S26361-F3582-E520
S26361-F3582-E540
S26361-F3582-E630
S26361-F3582-E650
S26361-F3582-E740
S26361-F3582-E760
S26361-F3503-E210
S26361-F3503-E220
- 1x 64-bit Intel Xeon UP (6/8MB SLC = Second Level Cache on Chip )
and heat pipe
occupies socket for one CPU
Xeon UP X3220 2.40GHz 2x4MB 1066MHz FSB (95W)
Xeon UP X3330 2.66GHz 6MB 1333MHz FSB (95W)
S26361-F3504-E220
S26361-F3504-E330
Section
Memory
III
There are 2 memory banks with 2 DIMM slots each.
Single channel memory configuration allow maximum flexibility:
Additional memory can be configured as single memory modules.
Dual channel memory configurations for maximum performance:
For optimum performance memory has to be configured in pairs of memory modules with identical size.
S26361-F3372-E413
S26361-F3372-E414
Main memory 1GB ECC
DDR2 800/PC2-6400 unbuffered
consisting of one module
max. 4x per system
Main memory 2GB ECC
DDR2 800/PC2-6400 unbuffered
consisting of one module
max. 4x per system
Section
Graphics
IV
ATI ES1000 (32MB) on board
S26361-F2748-E533
PY VGA Card 256MB PCI-e x1
NVIDIA Quadro NVS 290
256 MB PCIe-x1
The hight end optional NVIDIA NVS290 graphic card offers dual head operation
and fully 3D video support.
2x DVI or 2x VGA or
The cables for either two times DVI or VGA connections are part of the delievery.
1x DVI plus 1x VGA
cables adapters included
Dual head + fully 3-D
This PCIe-x1 card can also be installed in any PCIe-x4, x8 or x16 slot.
Only one card per server is allowed.
supported for Windows OS
not supported for Linux OS (native)
full height bracket
PY VGA card must be installed in slot 4
max. 1x per system
S26361-F2748-L533
PY VGA card 256MB PCI-e x1
for loose delivery
C
Fujitsu Technology Solutions x86 PRIMERGY Server
8 of 13
System configurator and order-information guide
C
PRIMERGY TX100 S1
Status 2010-06-30
Section
Accessible drives
V
There are 2 drive bays (2x 5,25") for accessible drives.
While stock lasts a FDD may be used in Projects only.
Following USB Components are available
S26391-F7119-L100
(USB cable included)
S26391-F264-L226
(USB cable included)
S26381-K340-V120
1) USB DVD+-RW:
Super Multi DVD slim drive
2) FDD USB (external):
external USB FDD
3) USB Keyboard:
KBPC PX D, professional keyboard
4) USB Mouse:
S26381-K415-L100
S26391-F6047-L208
Optical Wheel Mouse Tilt USB/PS2
5) USB Memorybird:
MyUSB P910 8GB
S26361-F3266-E2
S26361-F3267-E2
DVD-RW 16x super multi drive
all formats, DUAL/DL, DVD-RAM 6x BD-ROM, 16x DVD, 40x CD
S26361-F3530-E2
DVD-ROM 16/48x
Blu-ray Combo SATA
SATA
SATA
BD DL and all CD/DVD formats
1.6 x 5.25", black bezel
max. 1x per system
incl. description (Ger/US)
1.6 x 5.25", black bezel
max. 1x per system
only W2K, W3K and Linux
1.6 x 5.25", black bezel
max. 1x per system
S26361-F3324-E4
S26361-F3325-E4
S26361-F3857-E4
Tape drive DDS Gen5 USB 5.25"
36GB, 3MB/s, USB 2.0
Connector: USB "B"
Tape drive DDS Gen6 USB 5.25"
80GB, 3MB/s, USB 2.0
Connector: USB "B"
RDX drive USB 5.25" internal
80-160GB, 25MB/s, USB 2.0
Connector: USB "B"
with USB cable kit
with USB cable kit
with USB cable
incl. description (Ger/US)
data and cleaning cartridge
1.6 x 5.25", black bezel
max. 1x per system
incl. description (Ger/US)
data and cleaning cartridge
1.6 x 5.25", black bezel
max. 1x per system
incl. description (Ger/US)
without RDX cartridges
1.6 x 5.25", black bezel
max. 1x per system
RDX cartridges must be ordered separately
RDX 80GB = S26361-F3857-L80
RDX 160GB = S26361-F3857-L160
RDX 320GB = S26361-F3857-L320
D
Fujitsu Technology Solutions x86 PRIMERGY Server
9 of 13
System configurator and order-information guide
PRIMERGY TX100 S1 Status 2010-06-30
D
Section
Section
RAID-Controller
Hard disk drives
VI
VII
There is a 6 port SATA controller in the Base Unit.
Up to 4 SATA LFF (3.5") hard disks can be configured.
S26361-F3219-E160
HD 160GB 7.2krpm 3.5"
7200rpm,<9.0 ms, 8MB Cache
SATA 3Gb/s
non hot plug
max. 4x per system
S26361-F3334-E250
HD 250GB 7.2krpm 3.5"
7200rpm,<9.0 ms, 8MB Cache
BC-SATA 3Gb/s
S26361-F3334-E500
S26361-F3334-E750
HD 750GB 7.2krpm 3.5"
S26361-F3334-E100
HD 500GB 7.2krpm 3.5"
HD 1000GB 7.2krpm 3.5"
7200rpm,<9.0 ms, 8MB Cache
BC-SATA 3Gb/s
4x
7200rpm,<9.0 ms, 8MB Cache 7200rpm,<9.0 ms, 8MB Cache
BC-SATA 3Gb/s
non hot plug
BC-SATA 3Gb/s
non hot plug
non hot plug
non hot plug
max. 4x per system
max. 4x per system
max. 4x per system
max. 4x per system
E
Fujitsu Technology Solutions x86 PRIMERGY Server
10 of 13
System configurator and order-information guide
PRIMERGY TX100 S1 Status 2010-06-30
E
Section
Communication / Network
VIII
S26361-F3241-E1
S26361-F3228-E1
(Glyndon)
(Redwater)
Gigabit Ethernet Contr. 1000TX
Eth Ctrl 1x1Gbit PCIe Pro/1000PT Cu
Intel PRO/1000 PT Server Adaptor
PCIe x1
Gigabit Ethernet Controller Dual 1000TX
Eth Ctrl 2x1Gbit PCIe PRO/1000PT Cu
Intel Pro/1000PT dual port Server Adapter
PCIe x4
ext: for RJ45-connector, Cat 5
max. 2x per system
ext: for RJ45-plug, Cat 5
max. 1x per system
2x
S26361-F3516-E1
(Shelter Island)
Gigabit Ethernet Controller 1000TX
Eth Ctrl 1x1Gbit PCIe Gigabit CT DT Cu
Intel® Gigabit CT Desktop Adapter
PCIe x1
ext: for RJ45-connector, Cat 5
max. 2x per system
F
Fujitsu Technology Solutions x86 PRIMERGY Server
11 of 13
System configurator and order-information guide
F
PRIMERGY TX100 S1
Status 2010-06-30
Section
Miscellaneous
IX
S26361-F2742-E30
Paralell Interface option
occupies one card slot
max. 1x per system
S26361-F2542-E323
Key lock in side door option
black
max. 1x per system
Section
Country specific power cords
X
Power cord for floorstand versions for following countries:
1,8 m, grey
T26139-Y1740-E10
T26139-Y1742-E10
T26139-Y1743-E10
T26139-Y1744-E10
T26139-Y1745-E10
T26139-Y1746-E10
T26139-Y3850-E10
D, A, B, F, NL, FIN, N, S, E, P, RUS, TR
USA, Canada
Switzerland
UK, IR
Italy
Denmark
Option "no powercord", for Countries without
specific cable orderable like e.g. China
USB-Keyboards for following countries:
KBPC PX,
KBPC SX,
KB400,
prof. keyboard
standard keyboard
S26381-K340-E110
S26381-K340-E120
S26381-K340-E140
S26381-K340-E155
S26381-K340-E165
S26381-K340-E180
S26381-K340-E185
USA / international
Germany
S26381-K397-E110
S26381-K397-E120
S26381-K397-E140
S26381-K397-E155
S26381-K397-E165
S26381-K397-E180
S26381-K397-E185
S26381-K550-E102
S26381-K550-E120
S26381-K550-E140
S26381-K550-E154
S26381-K550-E165
S26381-K550-E180
S26381-K550-E185
S26381-K550-E104
S26381-K550-E170
S26381-K550-E177
France
Sweden / Finland
United Kingdom
Spain
Italy
Czech/Slovak
Switzerland
Thai
Options and other peripherals
For other options, refer to SystemArchitect and Pricelist.
These options are supplied lose with the shipment.
For suitable peripherals for this product, please refer to SystemArcitect.
End PRIMERGY TX100 S1
Fujitsu Technology Solutions x86 PRIMERGY Server
12 of 13
System configurator and order-information guide
PRIMERGY TX100 S1 Status 2010-06-30
Change Report
Date
Order number
Changes
2009-08-17
2009-08-17 S26361-F2542-E323
2009-06-30
New Order Codes for CPUs E5200 and E7400
Key Lock Option changed to BLACK => new Order Code
First Release
Fujitsu Technology Solutions x86 PRIMERGY Server
13 of 13
|