24V DRIVE, ULTRA HIGH SPEED LINE THERMAL PRINTER
4” MECHANISM
FTP-641MCL201/202
■ OVERVIEW
This thermal printer (driven by 24 VDC) provides high speed printing for
4-inch wide paper (114 mm). This printer is small in size, light weight,
and has low power consumption. The print head features open
construction for easy maintenance.
This printer is suitable for a variety of applications, such as POS
terminals, ticket machines, label printers, measuring devices and
medical equipment.
In addition to the interface board, a driving LSI (MCU + Gate Array) is
also available.
FTP-641MCL201, 202
■ HIGHLIGHTS
• Ultra high speed printing
It can print at 100 mm/s (800 dotlines/s) by using Fujitsu
Components' unique head drive control system.
• Compact and lightweight
The printer has a low profile of only 28 mm, and a light weight of
approximately 290 g.
• Low power consumption
The peak current for head driving is approximately 3.3 A (at 50 mm/s
FTP-621CU102, FTP-633GA101
printing speed, 50% printing ratio).
• Easy head access
Head-open construction makes head maintenance easy, especially
for head cleaning.
• Paper auto loading function
The thermal paper can be loaded without head-up lever operation.
• High resolution
8 dots/mm head provides clear print output.
• Selectable paper paths
Front or rear insertion types are available.
FTP-621DCL003
FTP-641MCL201/202
(Continued)
Item
Specifications
Pulse durability : 5 × 107 pulse/dot (using Fujitsu Takamisawa's standard
driving method)
Thermal head life
Wear resistance: 50 km (at 12.5% printing ratio)
Operating temperature
+5 to +40°C*3
Environmental
conditions
Operating humidity
Storage temperature
Storage humidity
Head temperature
Paper out/Mark detect
Head-up
20 to 85% RH (no condensation)
–20 to +60°C (excluding paper)
5 to 95% RH (no condensation)
By thermistor (applied energy control, abnormal temperature detection)
By photointerrupter (command set)
Detection
By microswitch
+0
Paper width
114 mm
–1
Recommended thermal sensitive
paper*4
1 ply paper in roll: FTP-040P0020
*1: The data to be printed is automatically read out by the printer driver equipment memory (host system frame
memory). The communication is parameter transfer.
*2: At 25°C, maximum applied voltage, minimum head resistance, specified paper, stable printing ratio.
*3: Temperature range for guaranteed printing density. It can operate at 0 to +40°C.
*4: Please contact us for other thermal papers.
3
FTP-641MCL201/202
■ DIMENSIONS
Printer mechanism
161
48 (Head-up)
21.9
14.2
135.2
66.6 (Paper center)
28
Head open
Y
3-M3 fixing screw (reference)
Location hole
for fixing
Y
123.8
Y-Y SECTION
(FTP-641MCL201)
(FTP-641MCL202)
Paper insertion
Paper insertion
Unit: mm
4
FTP-641MCL201/202
Interface board
139.7
129.6
113.1
22.9
14.0
22.3
27.4
4—ø3.6
(5.1)
CN3
CN4
CN12
CN13
CN2
CN7
88.9
78.8
28.0
CN11
25.4
CN5
CN1
CN10
(5.1)
(5.1)
(5.1)
(5.1)
14.0
47.1
88.9
17
Height of devices side
Height of solder side
23.6
1.6
5
Unit: mm
■ INTERFACE, COMMAND, OPTIONS
Please refer to the FTP-621DCL003/013 DATA SHEET for Interface, Command, and Options.
5
FTP-641MCL201/202
Europe
Japan
Fujitsu Components Europe B.V.
Diamantlaan 25
2132 WV Hoofddorp
Netherlands
Fujitsu Component Limited
Gotanda-Chuo Building
3-5, Higashigotanda 2-chome, Shinagawa-ku
Tokyo 141, Japan
Fujitsu Components
International
Headquarter
Offices
Tel: (31-23) 5560910
Fax: (31-23) 5560950
Email: [email protected]
Tel: (81-3) 5449-7010
Fax: (81-3) 5449-2626
Email: [email protected]
Asia Pacific
North and South America
Fujitsu Components America, Inc.
250 E. Caribbean Drive
Sunnyvale, CA 94089 U.S.A.
Tel: (1-408) 745-4900
Fujitsu Components Asia Ltd.
102E Pasir Panjang Road
#04-01 Citilink Warehouse Complex
Singapore 118529
Tel: (65) 375-8560
Fax: (1-408) 745-4970
Fax: (65) 273-3021
Email: [email protected]
Email: [email protected]
© 2001 Fujitsu Components America, Inc. All company and product names are trademarks or registered
trademarks of their respective owners. Rev. 09/2001
6
|