24 v drive, FTP-607 SerieS
HiGH SPeed THerMaL PrinTer
2-inCH TyPe eaSy LOad MeCHaniSM
FTP-627MCL103/113
n Overview
The FTP-607MCL Series thermal printer (driven by 24VDC)
provides ultra-high speed printing (ꢀ00mm/s) for 2-inch and
3-inch wide paper. Our original platen removal mechanism
allows easy paper loading and maintenance.
The FTP-607 MCL series can be used for a variety of
applications, such as POS/ECR, Kiosk terminals, banking
terminals, and measurement and medical equipment.
n HiGHLiGHTS
• Compact size
Height ꢀ5.5 mm, width 70.4 mm, depth 33.0 mm for the 2
inch model. The 3-inch product has a width of 92.4mm.
•
•
•
High speed printing
It can print at ꢀ00 mm/s (800 dotlines/s) maximum by
using Fujitsu's head drive control.
easy loading mechanism (eLM) type
Our detachable platen removal mechanism improved
paper loading and maintenance.
Multi-featuring diecast fame
By application of multi-featuring diecast frame, continous
print by function of heat-sink, high ESD stand by function
of earth frame and shock/vibration stand by function of
solid frame are valid.
• High resolution printing
8 dots/mm of resolution printing is possible.
ꢀ
FTP-627MCL103/113
n SPeCiFiCaTiOnS
Specification
Item
FTP-627MCL103
FTP-627MCL113
Interface
Conforms to RS232C / Centronics
24 VDC 5%, 1.0 A average (1.5A peak)
24V, 25% printing ratio
For print head
Operating
Voltage
For motor
24 VDC, 1 A maximum
For logic
5 VDC 5%, 0.1 A maximum
Printer mechanism
Interface board
Mechanism
72.4 x 33.0 x 15.5 mm (WxDxH) 75.0 x 33.4 x 15.5 mm (WxDxH)
70 x 60 x 24 mm (WxDxH)
Dimensions
Weight
Approximately 42g
Approximately 25g
Approximately 54g
Interface board
Pulse resistance: 50 million pulses/dot (under our standard
conditions). Abrasion resistance: paper traveling distance 50km
(print ratio: 25% or less)
Head
Life
Platen open
5,000 times
Operating temperature
Operating humidity
Storage temperature
Storage humidity
0˚ C to +50˚ C*1
20 to 85% RH (no condensation)
-20˚ C to +60˚ C (paper not included)
5 to 95% RH (no condensation)
Operating
environment
Head temperature
detection
Detected by thermistor
Detection
function
Paper out/mark detection Detected by photo-interrupter
Platen release detection Detected by slide switch (103/383 only)
High Sensitive Paper
Standard paper:
TF50KS-E4 (Nippon Paper)
TF60KS-E(Nippon Paper),
FTP-020PU001 (58mm),
PD105R (Oji Paper), FTP-
020P0701 (58mm)
Medium Life Paper
Long Life Paper
TF60KS-F1, FTP-020P0102
(58mm), PD170R (Oji Paper),
P220VBB-1 Mitsubishi Paper)
Recommended thermal sensitive paper
PD160R-N (Oji Paper),
AFB-235 (Mitsubishi Paper),
TP50KJ-R (Nippon Paper),
HA220AA (Nippon Paper)
*1: printing density assurance range, operation is possible at -25˚C to +70˚C
3
FTP-627MCL103/113
n diMenSiOnS
1. Printer mechanism
center of paper
center of paper
FTP-627MCL101
FTP-627MCL103
58.0
58.0
24(paper adnsensor)
24(paper adnsensor)
10.7
10.7
15.5
15.5
4.6
62.2
4.6
62.2
64.7
65.6±0.1
64.7
65.6±0.1
66.7
FTP-627MCL113
Center of paper
1.0
1.0
40.6
(34.5)
75.1
(width ofmainshaf)t
74.4
(width ofmainbody except lpatenhead)
atlever open
atleverlock
40.5
34.2
58.0
(paper ednsensor)
24.0
10.7(platencente)r
Center of paper
+1
50.0
44.4
34.0
1.2
+0
(Positioningholes)
Ø
po
1
2
.
(
2
.
+
4
s
0
.
i
t
1
i
on
i
n
4.5
g
h
o
l
e
s
)
(5)
33.7
62
Openlever
(34.5)
40.6
+2
75.1
Unit: mm
4
FTP-627MCL103/113
2 interface board
41.0
30
1
CN3
CN8
CN5
CN1
CN7
CN6
CN2
1
6
3
1
8
1
17.5
35.5
51.0
3.3
63.5
3.3
Unit: mm
70.0
5
FTP-627MCL103/113
n COnneCTOr Pin aSSiGnMenT OF MeCHaniSM (FPC)
1. Thermal Head
Part number
:
526ꢀ0-3090 Molex or equivalent
FTP-627MCL101/103 Pin aSSiGnMenT
Signal
PHK
I/O Contents
No
1
—
—
O
—
O
—
—
—
I
Photointerrupter (Cathode)
2
VSEN
PHE
SW
SW
VH
Ground power supply for paper sensor
Photointerrupter (Emittor)
Platen open switch
3
4
5
Platen open switch
6
7
VH
Power supply for thermal head
8
VH
9
DI
Print data in
Strobe 3
10 STB3
11 VDD
12 TH
I
—
O
—
—
—
—
—
—
I
Power for logic
Thermistor
13 GND
14 GND
15 GND
16 GND
17 GND
18 GND
19 STB1
20 STB2
21 LAT
Ground power supply for thermal head
Strobe 1
I
Strobe 2
I
Print data latch
Clock
22 CLK
I
23
—
—
—
—
I
Not connected
NC
24 VH
25 VH
Power supply for thermal head
Stepping motor excitation signal
26 VH
27 MT/A
28 MT/A
29 MT/B
30 MT/B
I
I
I
6
FTP-627MCL103/113
Fujitsu Components International Headquarter Offices
Japan
europe
Fujitsu Component Limited
Gotanda-Chuo Building
3-5, Higashigotanda 2-chome, Shinagawa-ku
Tokyo ꢀ4ꢀ, Japan
Fujitsu Components Europe B.V.
Diamantlaan 25
2ꢀ32 WV Hoofddorp
Netherlands
Tel: (8ꢀ-3) 5449-70ꢀ0
Tel: (3ꢀ-23) 55609ꢀ0
Fax: (8ꢀ-3) 5449-2626
Fax: (3ꢀ-23) 5560950
Email: [email protected]
Email: [email protected]
north and South america
Asia Pacific
Fujitsu Components America, Inc.
250 E. Caribbean Drive
Sunnyvale, CA 94089 U.S.A.
Tel: (ꢀ-408) 745-4900
Fujitsu Components Asia Ltd.
ꢀ02E Pasir Panjang Road
#04-0ꢀ Citilink Warehouse Complex
Singapore ꢀꢀ8529
Fax: (ꢀ-408) 745-4970
Tel: (65) 6375-8560
Email: [email protected]
Fax: (65) 6273-302ꢀ
Email: [email protected]
©2006 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property off their respective
owners.
Fujitsu Components America does not warrant that the content of datasheet is error free. In a continuing effort to improve our products Fujitsu
Components America, Inc. reserves the right to change specifications/datasheets without prior notice. Rev. 01/26/2006.
7
|