Project
™
®
Item
Frymaster
Quantity
CSI Section 11400
Approval
Date
FPH55 and FPH55-2
Gas Fryers
Models
FPH55
FPH55-2
Standard Features
Options &
• Self-contained FootPrint® filter --
extends oil life, saves money
Accessories
Basket lifts
• Electronic ignition/infrared burners
-- no pilot to light -- saves time
• Open-pot design -- deep cold zone
--Easy to clean which helps reduce
carbon buildup ensuring better
tasting food
Multi-product computer
Casters (2 on back only)
Frypot cover
Sediment tray
Screen-type basket support
rack
--Deep cold zone traps sediment out
of cooking areas
Fish plate
Full size basket in lieu of twin
Quick disconnect
Back up controller
• Centerline, solid state 1° action sen-
sor/controller responds quickly to
cold foods placed in either basket
ensuring uniformly-cooked product
• Boil-out mode -- for easy cleaning
Shown with optional computer
Specifications
Single high efficiency fryers with FootPrint®
Filtration
infrared heat on a large heat transfer area for rapid recovery
to frying temperature, yielding more product with less fuel
consumption.
The FPH55 is a single, high efficiency (H55) gas fryer with a
FootPrint filter contained beneath it. For maximum overall
efficiency, the FPH55 combines high volume, fuel efficient
frying with convenient, labor-saving filtration.
The open-pot design has no hard-to-clean tubes, and can
be thoroughly cleaned by hand. The deep cold zone traps
crumbs and sediment from the frying area. These particles
are trapped in the cold zone where they do not carbonize,
contaminate shortening or cling to fried foods. The standard
rear flush feature moves sediment to the front drain valve
for easy and thorough removal. A Power Shower feature can
be substituted for the front flush feature at time of order
The FootPrint filter requires no additional floor or storage
space. This hands-off filtering system is enhanced to set
new standards for cost savings, safety, ease of operation and
dependability. The entire filtering operation is automatic
and takes three minutes to complete. FootPrint filtration
makes frequent filtering simple and safe, extending the life
of expensive shortening to reduce operating costs and yield
high-quality, good-tasting products.
Each side of the FPH55-2 (split pot) fryer operates on 40,000
BTU/hr. (10,076 kcal/hr.) (11.7 kW), has a maximum shorten-
ing capacity of 25 lbs. (12 liters*), and has a frying area of
6-1/2 x 15 inches (165 x 381 mm). This fryer has all of the
features and options of the FPH55 and gives the operator
the ability to cook different foods simultaneously.
This single FootPrint filtration system operates on 80,000
BTU/hr. (20,151 kCal/hr.) (23.4kW). The frying area is 14” x 15”
(356 x 381 mm), and the maximum shortening capacity is 50
lbs. (25 liters*). It features a solid state controller that assures
product consistency and a centerline temperature sensor
for quick sensing of temperature drops caused by cold food
placed in the cooking area. Infrared power burners direct
*Liter conversions are for solid shortening @ 70°F.
8700 Line Avenue 71106
P. O. Box 51000 71135-1000
Shreveport, LA
Tel: 318-865-1711
Tel: 1-800-221-4583
Fax: 318-868-5987
Bulletin No. 818-0184 10/06
E-mail: [email protected]
|