864TRV Arched Face
• Classic Black 99300497
• Artisan 99300498
• Nickel 95800615
Part Numbers
• Artisan Antique Copper 95800619
• Artisan Antique Nickel 95800620
• French Country 99300499
• French Country Black 95800616
Compatibility:
• 864TRV Fireplace
• 864 HH Fireplace
Packing List:
• Face
• (4) 8-32 Nuts
• (2) Face Mounting Brackets (w screws)
• Glass Frame Cover
• (2) 10-24 1-1/2" Screws
The FPX Face Upgrade Kit (98500686) must
be installed prior to installing the facing
material and face.
Installation
Details
SIDE OF FIREPLACE
5"
Radius = 45-3/4”
35-3/4"
41”
1”
5/16” TO 1”
NOTE:
This face has an adjustable bracket that allows for
different facing depths to be tucked under the face.
NOTE FOR THICK FACING (BRICK, ROCK, ETC.):
The Fireplace Xtrodinair 864 Set-Up Face is recommended for
masonry installation (98500688). The set-up face helps locate
and support the masonry during installation.
Page 1 of 4
5/3/07
© Travis Industries, Inc.
864TRV Arched Face
2
The facing and hearth (if applicable) must be installed prior to attaching the face. See the installation manual
for complete details.
Raised
Fireplaces
Note how the tile is 1”
(maximum) above the
base of the fireplace.
Floor-Level
Fireplaces
Maximum 1`” Hearth
Page 3 of 4
5/3/07
© Travis Industries, Inc.
864TRV Arched Face
3
Install the face following the directions below.
Attach the upper brackets
to the face with the
included nuts.
a
The face is secured to the fireplace
Slide the face into place. The
tabs on the upper brackets insert
into the slots on the fireplace
brackets, holding the face in place
while the screws are tightened.
with four screws. Two of the screws
c
b
are fastened to the upper brackets
with press nuts. The lower screws
are included with the face.
Plated Surfaces
Denatured
Alcohol
Use denatured alcohol and a soft cloth to clean plated surfaces. Marks
left on the surface may damage the face.
Soft Cloth
Page 4 of 4
5/3/07
© Travis Industries, Inc.
|