EV9100-32
CB20-302E Water Filter
High flow, high capacity carbon filter for chlorine and chloramine
reduction
B E N E F I T S
Improves the taste and consistency of beverages
and ice by reducing chloramine, chlorine and
other off-tastes and odors
CC1E extended service cartridge contains radial
flow granular activated carbon (GAC)
CC3E cartridge fine filters water by reducing
sediment and dirt larger than 1/2 micron in size
Reduces asbestos fibers and cysts such as
Cryptosporidium and Giardia
High pressure housing includes head with
pressure relief valve, mounting bracket and bowl
Integral inlet and outlet pressure gauge monitors
operation
CB20-302E System: EV9100-32
NSF Certified under NSF/ANSI Standards 42
and 53
302 Replacement Cartridge Kit:
EV9105-21
Kit contains: (1) CC1E replacement cartridge
and (1) CC3E replacement cartridge
A P P L I C A T I O N / S I Z I N G
I N S T A L L A T I O N T I P S
O P E R A T I O N T I P S
Choose a mounting location which is suitable to
support the full weight of the system when
operating (60 lbs.)
Change cartridges on a regular 6 month
preventative maintenance program
For high flow, high volume foodservice
applications requiring chloramine reduction
Change cartridges when capacity is reached
(20,000 gallons) or when flow becomes too slow
Capacity: 20,000 gallons (75,700L)
Up to 5 gpm (19 Lpm) flow rate
3/4" FNPT inlet and outlet connection
Install on cold water lines only
Change cartridges when the difference between
the two pressure gauges is greater than or equal to
20 psi
For coffee and ice applications, add scale
reduction feeder at outlet of system. Part no.
EV9798-45
Do not install where unit is exposed to direct
sunlight
Service flow rate must not exceed 5.0 gpm
Allow a minimum of 4" clearance under the filter
to facilitate cartridge change
After installing CC1E cartridge, flush at full flow
for 5 minutes. Install CC3E cartridge and flush
system for 10 minutes
Do not braze/solder fittings into head
Never use a saddle valve for connection
|