Speed Dome
EPTZ900/500
USER MANUAL
Date: June 2006
2.4.1. Installation Requirements..............................................................2-20
2.4.2. EPTZ900 Dome Camera Wall Mount Installation .........................2-20
2.4.3. EPTZ500 Dome Camera Installation .............................................2-24
Separately Sold Accessories................................................................2-27
2.5.1. Pole mount......................................................................................2-27
2.5.2. Pole adapter....................................................................................2-27
2.5.3. Corner mount .................................................................................2-27
2.5.4. Multi-Function Keyboard Controller ...........................................2-27
2.5.
3.
4.
EPTZ900/500 CAMERA SETUP MENU.........................3-28
3.1.
Structure of the Setup Menu ................................................................3-28
3.1.1. Camera Setup Menu.......................................................................3-29
EPTZ900/500 FUNCTION SETUP AND OPERATION...4-33
4.1.
4.2.
4.3.
4.4.
4.5.
4.6.
Manual Control Mode............................................................................4-33
Auto Pan Mode ......................................................................................4-33
Position Setting.....................................................................................4-33
Tour Mode ..............................................................................................4-34
Alarm Link to a Position/Tour...............................................................4-35
Other operations ...................................................................................4-35
APPENDIX B: Protocol ............................................................4-37
1-2
1. EPTZ900/500 OVERVIEW
1.1. Introduction
EPTZ900/500, an intelligent high-speed dome camera is ready to secure your
property with its omni-directional and exact monitoring. An 18X optical and 12X digital
zoom combining with a high-performance chip makes captured images clear and
vivid. The other powerful camera functions this type of speed dome equips with:
¾
¾
¾
¾
PAL / NTSC image format suppose.
Auto and fast focus increases the searching speed and precision.
Auto Iris adjusts the monitoring image to the best brightness.
White Balance function makes the shades of color more natural in different
light conditions.
¾
¾
BLC (Backlight Compensation) function makes objects clear in a high
illumination background.
Color / B&W images auto switching to enhance the sensitivity in a low light
condition or at night.
Furthermore, the micro control unit enables camera a nimble and exact movement
from minimal 0.01°/sec to maximal 360°/sec. It can go to every preset position in 1
second. It also has other advantages such as:
¾
¾
¾
192 preset positions are available.
16 cruise tours can be set, and each tour contains up to 16 positions.
Up to256 speed domes can be supported on a RS485 bus when all speed
domes are controlled by multi-function keyboard controller.
Auto heater and fan to fit all kinds of temperature.
¾
¾
Provide 4 alarm inputs and 1 alarm output.
1-3
All of the features make the intelligent high-speed dome camera works for a wide
range and demanding application such as banks, airports, stations, casinos, streets
of cities, intelligent buildings, and etc.
1-4
1.2. Specifications
Model
EPTZ900
1/4" type Sony Super HAD CCD
EPTZ500
Pickup Device
Video Format
Scanning System
NTSC or PAL
NTSC: 525 TV lines, 60 fields/sec
PAL: 625 TV lines, 50 fields/sec
Picture Elements
Horizontal Resolution
Sensitivity
768 x 494 ( NTSC ) , 752 x 582 ( PAL )
480 TVL
1.0 Lux/F=1.4
S/N Ratio (AGC OFF)
Electronic Shutter
Digital Slow Shutter
Shutter Selection
Lens Type
Over 50dB
1/50~1/10,000 (s)
No
No
18x optical zoom , f=4.1 mm (wide) to 73.8mm (tele) , F1.4 to F3.0
Zoom Ratio
216x max (18x Optical and 12x Digital Zoom )
Auto ICR
No
ON/OFF
Black Light Comp.
Auto Gain Control
White Balance
Auto
Auto/Indoor/Outdoor
BNC 1.0Vp-p , 75ohm
Line Lock/Internal Sync
24VAC
Video Output
Sync. Mode
Power Source
Power Consumption
Operating Temperature
Operating Moisture
Communication
18W; 70W with heater
18W
-40°C~50°C ; -40°F~122°F
0°C~50°C ; 32°F~122°F
≤95%
RS-485
Communication Speed
Horizontal Rotation Speed
Horizontal Rotation Range
Tilt Rotation Range
Auto Flip
1200/2400/4800/9600bps
0.1°/s－360°/s (1-239 grade shift gears)
360° unlimited rotation
90° pendulum motion
Rotates 180° when camera tilts to the vertical position
Control speed auto-adjusted according to zoom length changing
Auto Zoom Speed Control
Auto Pan, 2 Points Scanning
Auto Pan Speed
Can set freely
1－239 grade available
1－239 second available
192 positions
Dwell Time (2 points)
Preset Positions
1-5
1－239 grade available,0.1º/s - 360º/s
1－239 second available
16 group
Running To Position Speed
Dwell Time At Preset Position
Tour
Tour Point Per Group
Fan, Heater (EPTZ900)
Position Accuracy
Alarm
16 preset positions
Fan & Heater auto starts
No
±0.1°
4 in 1 out with tour/position auto triggering
Proportional Pan Speed
Built-in menu for functions
Built-in Protocols
Yes
Yes
Auto, EVF, Plus-D, A-Type, Pelco-D, Pelco-P
RS485
Communication
Address editable through DIP
switch
Yes
Speed Dome Address
Manual Pan/tilt speed
Weatherproof Ratings
Dimensions
0-255
Pan: 0.1º ~ 180º/s
Tilt: 0.1º ~ 180º/s
IP66
Indoor
208.5mm (W) x 221.6mm (H)
/
218.5mm (W) x 267.5mm (H) /
8.6" (W) x 10.5" (H)
4.2kg/9.25lbs
8.2" (W) x 8.7" (H)
2.15kg/4.8lbs
Weight
Certifications
CE ; FCC
1-6
1.3. Feature
1.3.1. Profile of EPTZ900/500
EPTZ900
Wall Mount Bracket
M5 Bolt (Hex) x3
Base PCB board
Control board
Housing
Connection Bus
Power Cable
BNC Cable
Inner Housing
M3 Bolt x3
RS485 Cable
Mechanical Part
Camera Module
Bulb
EPTZ500
Power Cable
BNC Cable
Base PCB board
Control board
Clip
RS485 Cable
Housing
Connection Bus
Mechanical Part
Ceiling
Button
Bulb
Camera Module
1-7
1.3.2. Base Board
The base board that is on the bottom of the housing connects to power cable, video
cable, control cable, alarm cable, fan and heater (fan and heater are for EPTZ900 only). In
order to connect to cables, the board needs to be taken off, and put back after finishing
connecting to all cables. The connectors of cable names are marked on the board in white
text. The details of the alarm connector (JP5) are shown on the APPENDIX A.
For EPTZ900, JP1, JP3 and JP6 that are two-pin connectors on the base board need to
be taken off during installation. JP1 and JP3 are connectors for heater, and they can be
switched. JP6 is a fan controller connector that turns on/off of the fan. The 3 cables are too
short to be connected to a wrong connector when putting them back.
RELAY
JP5
Video +
Video -
RS485 +
RS485 -
AC24
AC24
JP4
JP6
JP3
JP1
EPTZ900 Baseboard
1-8
JP5
RELAY
EPTZ500 Baseboard
1.3.3. EPTZ900/500 Control Board
The PCB board with two dipswitches is the control board of speed dome. The two
switches are used to set address, protocol, Baud Rate, video format and terminator
resistance.
CPU
SW2
ID1
ID2
ID3
ID4
ID5
ID6
ID7
ID8
SW1
1-9
1.4. EPTZ900/500 Connection
110V AC
24V AC
POWER
24V AC / 3.5 A
Adapter
BNC
1.0Vpp ± 0.2V, 75
Video Out
Ω
RS485 Tx(+)
RS485 Tx(-)
RS485 Control Line
Alarm 1
EPTZ900/500
Alarm 2
Alarm 3
Alarm 4
4 ALARM INPUTS
GROUND
ALARM OUTPUTS
N.C.
N.O.
COM
1-10
1.5. EPTZ900/500 Quick Operation Guide (Work with EKB500)
EPTZ900/500 and EKB500 (Keyboard) can work together by using factory
default setting. You just need to connect cables by following the steps:
1. Connect the RS485 cable to EPTZ900/500 and a Keyboard (EKB500).
2. Connect a video cable from EPTZ900/500 to a monitor.
3. Connect the power to the EPTZ900/500 and a Keyboard (EKB500) .
After the speed dome finishes the self-test mode, you can start to operate the
speed dome via the keyboard.
To operate the EPTZ900/500:
UP
IRIS
+
Focus
F.
Zoom
In
Zoom OUT
Zoom IN
LEFT
RIGHT
-
N.
Out
DOWN
1. Shift the Joystick up/down or right/left to view from camera.
2. Turn the top of the Joystick to zoom in/out.
3. Press Zoom In/Out, Focus F. /N. and IRIS +/- function keys to operate the
EPTZ900/500.
1-11
2. EPTZ900/500 INSTALLATION
2.1. Packing List
There are 3 boxes that are housing, bulb and mechanical part with a camera module,
one wall mount bracket, one power adapter and one accessory packet in the package.
The detail accessories list below:
¾
¾
¾
¾
¾
¾
Housing x1
Bulb x1
Mechanical part with a camera module x1
Wall mount bracket x1
Adapter x1
Accessory packet
— Glove x2
— M5 Hex Allen wrench x1
— Pin connector x1
— M5 screw (Hex) x3 for wall mount bracket fixing
— M3 screw x3 for bulb fixing
— Anchor nut and wall mount screw x4
2.2. Cable Needed
z
Power Cable
An adapter with 24V AC/3.5A output provides the power to the speed dome. An
extension power line may be needed.
Note: The input AC voltage range of an adapter depends on different area.
Please make sure the voltage range before installing.
2-12
z
Video Cable
A BNC cable is used for connecting a speed dome to a DVR or a monitor. An amplifier
may be needed if the video cable is too long.
z
Control Cable
Basically, EPTZ900/500 uses a differential pair to connect to other devices by
cascading. A cable that has low signal decline can be used as a control cable.
z
Alarm Cable
An alarm cable is not included in the packing list. A suitable wire can be used as an
alarm cable.
2.3. Initial Setup
Initial setup includes dome address, communication protocol, transmission speed,
video format, and terminator resistance settings. All of the settings should be confirmed
before the dome is installed. The control-related setting that is address, communication
protocol and transmission speed have to be set consistently with the control device such
as a keyboard or a DVR.
Notice: Please make sure the power is off before setting, and restart the speed dome to
enable a new value after changing.
2-13
2.3.1. Address Setting
The address code of the EPTZ900/500 should be set to correspond properly with a
control device to control multiple dome cameras. The address codes are made up by
the dipswitch SW1 (8 bits) on the PCB board. The 8 bits dipswitch indicates the binary
coded of the address, and there are 256 addresses can be selected (0 ~ 255, 28 = 256).
It also means that there up to 256 dome cameras can cascade on the RS485 bus. The
dipswitch setting and the indicated address are represented in the following chart.
Note: The factory default address is 1.
Notice: Please make sure the power is off before setting, and restart the speed dome
to enable a new value after changing.
CPU
SW2
ID1
ID2
ID3
ID4
ID5
ID6
ID7
ID8
SW1
2-14
Switch
Address
Switch
Address
Sw
i
tch
Address
Sw
i
t
ch
Addre
ss
ON
ON
ON
ON
0
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
1
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
1
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
1
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
1
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
ON
ON
ON
ON
1
1
1
1
1
ON
ON
ON
ON
2
1
1
1
1
ON
ON
ON
ON
3
1
1
1
1
ON
ON
ON
ON
4
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
1
1
1
1
ON
ON
ON
ON
5
1
1
1
1
ON
ON
ON
ON
6
1
1
1
1
ON
ON
ON
ON
7
1
1
1
1
ON
ON
ON
ON
8
1
1
1
1
ON
ON
ON
ON
9
1
1
1
1
ON
ON
ON
ON
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
1
1
1
1
ON
ON
ON
ON
1
1
1
1
ON
ON
ON
ON
1
1
1
1
ON
ON
ON
ON
1
1
1
1
ON
ON
ON
ON
1
1
1
1
ON
ON
ON
ON
1
1
1
1
ON
ON
ON
ON
1
1
1
1
ON
ON
ON
ON
1
1
1
1
ON
ON
ON
ON
1
1
1
1
ON
ON
ON
ON
1
1
1
1
ON
ON
ON
ON
1
1
1
1
ON
ON
ON
ON
1
1
1
1
ON
ON
ON
ON
1
1
1
1
ON
ON
ON
ON
1
1
1
1
ON
ON
ON
ON
1
1
1
1
ON
ON
ON
ON
1
1
1
1
ON
ON
ON
ON
1
1
1
1
ON
ON
ON
ON
1
1
1
1
ON
ON
ON
ON
1
1
1
1
ON
ON
ON
ON
1
1
1
1
ON
ON
ON
ON
1
1
1
1
ON
ON
ON
ON
1
1
1
1
2-15
Switch
Address
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
Switch
Address
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
Switch
Address
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
Switch
Address
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
ON
ON
ON
ON
1
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
1
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
1
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
1
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
ON
ON
ON
ON
1
1
1
1
ON
ON
ON
ON
1
1
1
1
ON
ON
ON
ON
1
1
1
1
ON
ON
ON
ON
1
1
1
1
ON
ON
ON
ON
1
1
1
1
ON
ON
ON
ON
1
1
1
1
ON
ON
ON
ON
1
1
1
1
ON
ON
ON
ON
1
1
1
1
ON
ON
ON
ON
1
1
1
1
ON
ON
ON
ON
1
1
1
1
ON
ON
ON
ON
1
1
1
1
ON
ON
ON
ON
1
1
1
1
ON
ON
ON
ON
1
1
1
1
ON
ON
ON
ON
1
1
1
1
ON
ON
ON
ON
1
1
1
1
ON
ON
ON
ON
1
1
1
1
ON
ON
ON
ON
1
1
1
1
ON
ON
ON
ON
1
1
1
1
ON
ON
ON
ON
1
1
1
1
ON
ON
ON
ON
1
1
1
1
ON
ON
ON
ON
1
1
1
1
ON
ON
ON
ON
1
1
1
1
ON
ON
ON
ON
1
1
1
1
ON
ON
ON
ON
1
1
1
1
ON
ON
ON
ON
1
1
1
1
ON
ON
ON
ON
1
1
1
1
ON
ON
ON
ON
1
1
1
1
ON
ON
ON
ON
1
1
1
1
ON
ON
ON
ON
1
1
1
1
ON
ON
ON
ON
1
1
1
1
ON
ON
ON
ON
1
1
1
1
2-16
2.3.2. Communication Protocol Setting
The 1st, 2nd and 3rd bits of the SW2 are used to set communication protocol. The
factory default protocol is EVF.
EVF - 1
PELCO-D
PELCO-P
TYPE-A
SW2
Protocol
Baud Rate
PAL / NTSC
Maching Resistance
Notice: Please make sure the power is off before setting, and restart the speed dome to
enable a new value after changing.
Set all of protocol switches to ON; the EPTZ900/500 will enter a self-test mode.
2.3.3. Transmission Speed Setting (Baud Rate Setting)
The 4th and 5th bits of the SW2 on the PCB board are used to set the Baud Rate. The
default baud rate setting is 9600.
9600 BPS
4800 BPS
2400 BPS 1200 BPS
SW2
Protocol
Baud Rate
PAL / NTSC
Maching Resistance
Notice: Please make sure the power is off before setting, and restart the speed dome to
enable a new value after changing.
2-17
2.3.4. Video Format Setting
The 6th bits of the SW2 on the PCB board are used to set the video format. The
default video format depends on the factory setting. Please do not change it.
NTSC
PAL
SW2
Protocol
Baud Rate
PAL / NTSC
Maching Resistance
Notice: Please make sure the power is off before setting, and restart the speed dome to
enable a new value after changing.
2.3.5. RS-485 Bus Terminator Resistance
For central controlling, the terminator resistance should be set for the device that is
the furthest one away from the controller. The 8th bit on the SW2 is a switch to enable or
disable the terminator resistance. When it is switched ON, the BUS terminator
resistance is connected.
OFF
ON
SW2
Protocol
Baud Rate
PAL / NTSC
Maching Resistance
2-18
n ≦ 255
RS485
Keyboard
DVR
Ternimator
Resistance
ON
Control Unit
CAM-0
CAM-1
CAM-n
Note: When the dome is out of control, or does not work under control well, try to switch
the terminator resistance ON.
Notice: Please make sure the power is off before setting, and restart the speed dome to
enable a new value after changing.
2-19
2.4. Rack and Speed Dome Installation
2.4.1. Installation Requirements
1. Installation should be handled by a qualified service agent and should comply with
all local regulations. Service personnel should expect potential problems such as
surface strength, surface material, falling objects, outer breaches, building vibration
or other similar conditions.
2. Check for all necessary materials, and ensure if the selected installation location is
suitable for the speed dome.
2.4.2. EPTZ900 Dome Camera Wall Mount Installation
Notice: Installation location that is a wall, a pole or a ceiling needs to support above five
times the total weight of the camera assembly (about 16 kg) to avoid shaken images, and
dropping.
1. Set wall mount bracket on the wall. Mark the center of the holes on the wall against
the bracket holes. Use a drill to make 4 holes that can be nailed 4 0.25” X 1.25”
screws at the marks.
Notice: The length of the screws depends on the surface material. The mentioned screws
are used in the normal concrete surface.
2-20
2. Thread the cable through the hole in the wall mount bracket, and screw in 4 M8
nuts for mounting the bracket.
3. Take off the housing from the packing, and take off the baseboard (4 bolts on it.)
inside the housing. Thread the cable through the top of the housing. Fix the
housing on the wall mount bracket, and screw in 3 M5 bolts (Hex) on the top of the
bracket with the attached Hex Allen wrench to fix the housing.
M5 Bolt
Hex Allen wrench
RELAY
JP5
Video +
Video -
RS485 +
RS485 -
AC24
AC24
JP4
JP6
JP3
JP1
4. Connect the cable connectors to the nodes on the baseboard, and then fix the
baseboard in the housing by screwing 4 bolts on it.
Notice: Please notice the polarity of control line. The EPTZ900 will not work if the polarity
of control line is mis-connected.
2-21
5. Align the two screw holes on the bottom of mechanical part to the two bolts on the
base of the housing, and twist the mechanical part clockwise a little bit in order to
engage it with the base. Screw the two bolts on the base, and then connect and fix
the connection bus to the PCB board on the mechanical part.
Notice: The camera module on the mechanical part is very sensitive. Please be careful
when installing this part.
6. Remove the lens protection cover before installing the bulb. Align the 3 bolt holes
into the 3 housing bolt holes, and screw thee M3 bolts with the attached small
screw driver to fix the bulb.
M3 Blot
M3 Blot
GLOVE
2-22
Notice: In order to protect the bulb from dirt and scrape, please put on the gloves before
installing the bulb.
7. Turn on the power, and start to operate the EPTZ900.
Note: When turning on the power, the EPTZ900 will enter self-inspection mode, and carry
out a self-testing program. After finishing self-inspection, you can start to operate
the EPTZ900.
2-23
|