Professional Stainless Steel
Steam Cleaner
OWNER’S MANUAL
Model SC926H
120V., 60 Hz, 13 A., 1550 W
EURO-PRO OPERATING LLC
94 Main Mill Street, Door 16
Plattsburgh, NY 12901
Tel.: 1 (800) 798-7398
Model
SC926H
IMPORTANT SAFETY INSTRUCTIONS
When using your Steam Cleaner, basic safety precautions should always be
observed, including the following:
1. Read all instructions before using your
Steam Cleaner.
1 YEAR LIMITED WARRANTY
To reduce the risk of fire, electric shock, or
injury:
Your Steam Cleaner is warranted to be free from defects in material and workmanship for a period
of one (1) year from the date of purchase when utilized for normal household use by the original
purchaser only. The included Warranty Registration Card must be filled out and returned within 10
days of purchase. This is essential for your Warranty to be effective should any problem arise with
this product.
2. Use the system only for its intended use.
3. To protect against a risk of electric shock,
do not immerse any part of the system in
water or other liquids.
4. This unit should always be turned “OFF”
before plugging into or unplugging from
electrical outlet. Never yank cord to
disconnect from outlet; instead, grasp plug
and pull to disconnect.
5. Do not allow cord to touch hot surfaces.
Let the system cool completely before
putting away or before opening the water
tank (removing the safety cap). Wrap
power cord loosely around your system
when storing.
6. Always disconnect system from electrical
outlet when filling or emptying water tank
and when not in use. Always turn the safety
cap slowly when opening the water tank.
This will allow any remaining steam to
escape gradually.
7. Do not operate the system with a damaged
cord or plug, or if the appliance or any other
part of the system has been dropped or
damaged. To avoid the risk of electric
shock, do not disassemble or attempt to
repair the Steam Cleaner. Return the
system to Euro-Pro Operating LLC (see
warranty) for examination and repair.
Incorrect re-assembly or repair can
cause a risk of electrical shock or injury to
persons when the steam cleaner is used.
8. Close supervision is necessary for any
appliance being used by or near children.
Do not leave the system unattended while
connected.
9. Burns can occur from touching hot parts,
hot water or steam. Do not turn upside
down as there may be hot water in the unit.
Never direct steam at any person. The
steam is very hot and can cause burns.
10. Do not operate in the presence of
explosive and/or flammable fumes.
11. This appliance is intended only for
household use. Follow all user instructions
in this manual.
•
Do not leave the Steam Cleaner plugged in
when unattended. Unplug the electrical cord
when not in use and before servicing or
refilling water tank.
Should any defect covered by the terms of the limited warranty be discovered within one year,
Euro-Pro Operating LLC will repair or replace any defective part provided the unit is returned by
the original purchaser, freight prepaid, to:
•
•
•
Do not allow unit to be used as a toy. Close
attention is necessary when used by or near
children, pets or plants.
Use only as described in this manual. Use
only manufacturer’s recommended
accessories.
When using the steam cleaner, please note
that the force and the heat of the steam may
damage certain surfaces or textiles. Always
test on a small, concealed area of the material
that you are steam cleaning. i.e. painted wood
or leather can be bleached with hot steam;
glossy plastic can be dulled, fabrics such as
acrylic, velvet and linen can react sensitively
to the temperature of the steam.
Euro-Pro Operating LLC, 94 Main Mill Street, Door 16, Plattsburgh, N.Y. 12901
Proof of purchase date and $23.95 for handling and return packing/shipping charges must be
included.*
The liability of under this warranty is limited solely to the cost of the replacement parts or the
complete unit at our option. LABOUR CHARGES ARE NOT INCLUDED.
This warranty does not cover normal wear of parts and does not apply to any unit that has been
tampered with or used for commercial purposes. This Limited Warranty does not cover damage
caused by misuse, negligent handling, or damage due to faulty packaging or mishandling in transit
(by any common carrier).
This warranty is extended to the original purchaser of the unit and excludes all other legal and/or
conventional warranties. The responsibility of Euro-Pro Operating LLC, if any, is limited to the
specific obligations expressly assumed by it under the terms of the limited warranty. In no event is
Euro-Pro Operating LLC liable for incidental or consequential damages of any nature whatsoever.
Some States/Provinces do not permit the exclusion or limitation of incidental or consequential
damages, so the above may not apply to you.
•
•
Do not hold the steam jet concentrated for too
long on a single spot.
Do not pull cord, use cord as a handle, close
a door on cord, or pull cord around sharp
edges or corners. Keep cord away from
heated surfaces.
This warranty gives you specific legal rights which vary from state to state or province to province.
*Important: Carefully pack item to avoid damage in shipping. Be sure to attach tag to item before
packing with your name, complete address and phone number with note giving purchase
information, model number and what you believe is the problem with item. We recommend you
insure the package (as damage in shipping is not covered by your warranty). Mark the outside of
your package “ATTENTION CUSTOMER SERVICE”. We are constantly striving to improve our
products, therefore the specifications contained herein are subject to change without
notice.
•
•
•
•
•
Do not use extension cords or outlets with
inadequate current carrying capacity.
Do not unplug by pulling on cord. To unplug,
grasp the plug, not the cord.
Do not handle plug or steam cleaner with wet
hands or operate without shoes.
Do not put any objects into openings. Do not
use with any opening blocked.
Store your appliance indoors in a cool, dry
area.
OWNERSHIP REGISTRATION CARD
Please fill out and mail the product registration card within ten (10) days of purchase. The registration will enable
us to contact you in the unlikely event of a product safety notification. By returning this card you acknowledge to
have read and understood the instructions for use, and warnings set forth in the accompanying instructions.
•
•
Keep your work area well lit.
When in use, never turn the appliance over
or on its side. Never direct steam towards
people, animals or plants.
•
•
Do not immerse the steam cleaner into water
or other liquids. Always unplug the power
cord from the electrical socket when filling the
steam cleaner.
Do NOT add cleaning solutions, scented
perfumes, oils or any other chemicals to
the water used in this appliance as this
may damage the unit or make it unsafe for
use. Use regular tap water or distilled/purified
water if the tap water in your area is very hard.
RETURN TO:
EURO-PRO Operating LLC, 94 Main Mill Street, Door 16, Plattsburgh, N.Y., 12901
SC926H
_____________________________________________________________________
Appliance model
_____________________________________________________________________
Date purchased
Name of store
12. Never use any chemicals or substance
other than tap water in the machine. Use of
chemicals may damage the machine. Use
of chemicals will automatically void your
warranty.
_____________________________________________________________________
Owner’s name
_____________________________________________________________________
Address
City
State
Zip code
SAVE THESE INSTRUCTIONS
For Household Use Only
Printed in Turkey
12
1
Rev. 07/05B
TIPS ON HOW TO USE YOUR SYSTEM
ADDITIONAL IMPORTANT SAFEGUARDS
1. To avoid circuit overload, do not operate another appliance on the same socket
(circuit) as the steam cleaner.
2. If an extension cord is absolutely necessary, an extension cord rated a minimum
of 15 ampere, 14 gauge grounded cord should be used. Cords rated for less
amperage may overheat. Care should be taken to arrange cord so that it can not
be pulled or tripped over.
ALWAYS FINISH CLEANING BY WIPING DOWN THE CLEANED SURFACE
WITH A TOWEL
Refrigerator - Use the concentrator to
blow away dirt in the ice machine and
on door seals. The vapor will not dry
out or crack the seals as chemicals
often do. Can openers and other
kitchen equipment can be easily
cleaned with the bristle brush to get into
all the nooks and crannies. Mold stains
around door gaskets can be removed
with the bristle brush.
To clean microwaves or other small
appliances use the nylon bristle brush
for small areas.
Note: When cleaning small electrical
appliances always unplug them from
outlet before cleaning. Do not direct
steam into any openings of the
Hints
The steam cleaner has many uses that
have not been mentioned. This was
meant only to give you a general idea of
what can be achieved with the unit.
However, the ways in which to use the
attachments and brushes are in most
cases universal. It is most helpful to
always have a terry cloth towel or paper
towel ready to use for removal of
moisture and residue. 100% white
cotton towels work best.
You can clean the brushes with your
steam cleaner. When cleaning the
bristle brushes, use a pair of pliers to
hold and blow dirt as above or place in
the basket of your dishwasher.
3. Do not leave unattended when the system is connected to a power
supply/electrical outlet.
WARNING: This appliance is equipped with a grounded,
type 3-wire cord (3-prong plug). This plug will only fit into an
electrical outlet made for a 3-prong plug. This is a safety
feature. If the plug should fail to fit the outlet, contact an
electrician to replace the outlet. Do not attempt to defeat the
safety purpose of the grounding pin, part of the 3-prong plug.
CAUTION: Always drain condensed water from hose
before use or if unit has been left idle for a period of time. To
drain hose, direct nozzle into an appropriate container or sink
and depress hand grip steam switch. Once hose has been
drained, normal use may be resumed. Never direct nozzle
towards people, animals or plants.
Note: Wipe with a towel immediately
before the cleaned area dries. When
cleaning the oven, use the bristle brush
to clean around the elements and drip
trays. Use the bristle brush for cracks,
crevices, and hard to reach areas.
appliances.
To clean counter tops, use the triangle
brush. For heavily soiled areas, apply
soap and scrub briefly with the bristles
of the triangle brush without applying
steam. Wipe the soap away. Turn on
the steam and scrub a bit more. Then,
turn off the steam and allow the triangle
brush to cool.
IMPORTANT: Do NOT add cleaning solutions, scented perfumes, oils or
any other chemicals to the water used in this appliance.
Use regular water or distilled/purified water if the tap
water in your area is very hard.
Place a towel over the triangle brush,
turn the steam back on and go over the
area one more time. Finally, go back
over the surface with a dry terry cloth
towel to dry if necessary.
WARNING: Danger of Scalding. Please use caution when using
the steam cleaner. The steam emitted is very hot.
ORDERING SUPPLIES
If you need to order supplies such as steam pocket towels, please call the
customer service number at 1 (800) 798-7398.
SAVE THESE INSTRUCTIONS
FOR HOUSEHOLD USE ONLY
2
11
TIPS ON HOW TO USE YOUR SYSTEM
GETTING TO KNOW YOUR STEAM CLEANER
Blinds
Fiberglass or Stainless Steel Surfaces
Use the bristle brush. Slowly move the
brush over the surface to be cleaned.
The vapor will emulsify the dirt and
grease on the surface. Follow behind
with a terry cloth towel over the brush to
remove excess moisture and residue.
Tip: An old idea for polishing stainless
steel is to wipe it down with seltzer soda
water after it is cleaned.
Use the nylon bristle brush to clean
blinds. Move the brush over the
surface, allowing enough time for the
vapor to penetrate. Work quickly on
PVC blinds. Test for color fastness on
fabric blinds before using. Finish by
wiping with a towel.
Artificial Plants
Use the concentrator without a brush
attached to blow off the dust and dirt.
Bathroom Areas
To clean the bathtub or shower area, use
the bristle brush for grout, shower door
tracks, hard to get areas and heavily
soiled areas. The dual edge window/tile
squeegee will be the most efficient way
to clean the rest of the area. Allow plenty
of time for the heat to penetrate the
surface. This is especially helpful in the
shower area if there is tile or grout. Wipe
with towel.
Clothing
A vapor cleaning system is excellent for
removing wrinkles from fabrics. Simply
“vaporize” the surface from a distance
(12”-18”). The dry vapor removes
wrinkles without leaving the fabric wet
like ordinary fabric steamers do. Stretch
the fabric to smooth out the wrinkles.
Nicotine and Tar
Removal of soap scum on tile, grout, and
shower doors is also easier with the
steam cleaner.
To clean sanitary fixtures, use the
concentrator with or without bristle brush.
Use a terry cloth towel or paper towel to
wipe up excess moisture and residue.
To clean the sink and faucets, use bristle
brush then finish by wiping with a towel.
Nicotine and tar dissolves at high
temperatures and becomes a light
yellow oil that has the consistency of
sewing machine oil. When the
nicotine/tar film is touched by steam
pocket, it immediately dissolves and
flows into the steam pocket towel. You
can remove it from flat surfaces as fast
as you can move the steam pocket over
the surface.
Soap Scum
Soap scum dissolves almost immediately
under a combination of heat and
moisture. Rinse the surface with a small
amount of water afterwards or go back
over it once more with a clean terry cloth
towel.
Note: Soap scum sometimes will
develop a hard surface from waterborne
minerals. If this is the case, use the
bristle brush to break up this surface - or
spray or wipe first with lemon, vinegar or
seltzer soda water to soften the minerals.
Moving too slowly can dry out the soap
scum and cause it to granulate on the
surface. The surface will have a gritty
feel. If this happens, apply vapor to the
surface with the bristle brush again and
re-clean.
Removing Wax, Tar, Etc.
1. Main Unit
2. Casters (x4)
Many stains are only stuck on the
surface of materials and can be easily
and quickly removed by “blowing”
excess material away from the surface
from the side. This is accomplished by
using the concentrator. Hold the terry
cloth towel to the side to catch the loose
residue as it is blown by the
12. Concentrator
3. Flexible Hose
13. Squeegee
4. Heating Light (red)
14. Funnel
5. Steam Ready (green)
15. Extension Tube (x2)
6. On/Off Button
7. Handle
16. Steam Pocket Frame
17. Steam Pocket Towel
18. Extended Concentrator
19. Detail Brushes (x2)
20. Triangle Brush
8. Safety Filler Cap
9. Steam On/Off Switch
10. Variable Steam Control
11. Locking Button
concentrator.
Note: Always vacuum any loose
residue off the surface before you apply
vapor to it.
Technical Specifications
Voltage:
120V., 60Hz.
1550 Watts
Power:
Current:
13 A.
Water Capacity:
Steam Generator:
84 US fl oz (2.5 L)
Stainless Steel
Garden Furniture
Use any of the brushes depending on the
surface area. Work quickly when
cleaning resin outdoor furniture. Finish by
wiping with a towel.
* Illustrations may differ from actual product.
10
3
FEATURES OF YOUR STEAM CLEANER
TIPS ON HOW TO USE YOUR SYSTEM
Wood, Vinyl and Marble Floors
CAUTION: Always determine
3. Heavy-duty crush-resistant
1. Multipurpose Steam Cleaner:
the color-fastness of any fabric-
especially with reds or blues - by taking a
clean, moist, warm towel and gently
rubbing a small area as far down on the
back or other out of the way place on the
furniture as possible. If color comes off
on the towel, you may need to have the
piece dry cleaned.
hose.
Use the Steam Pocket ™. Move the
steam pocket across the floor as if you
are mopping. When one side of the
towel is soiled, turn the steam pocket
frame and use the other side. One of
the great advantages of using our
Steam Pocket™ is that your floor will dry
faster than if you used a mop or other
floor cleaning device. It is normal that
some moisture may be left behind
depending on how quickly you move the
Steam Pocket™ across the floor and the
relative heat and humidity of the room.
Be sure to move quickly and steadily
over wood, linoleum and vinyl flooring to
avoid damaging the surface and
removing wax.
To Clean Waxed Floors: Use the
steam pocket with quick strokes. This
will cause the dirt to be removed but not
the wax.
Vinyl Floors: Do not allow heat to build
up in any kind of vinyl, since it can
soften it enough to affect its texture.
Work fast on vinyl.
Bathrooms, kitchens, living
areas, pet areas and appliances.
Automotive, patio and windows.
2. Stainless Steel Boiler:
Window, Glass Surfaces and Mirrors
Non-corroding, stainless
steel boiler. Welded
construction.
Use the dual edge glass and tile
squeegee. Work with the vapor jet on
using the top to bottom movements. Use
the squeegee with the vapor off to clear
the water from the glass. To do this
without leaving streaks, use lateral
movements from the top to the bottom of
the surface.
4. Versatile, quick-change
accessories
3. Variable Steam:
Allows you to adapt the
steam flow to the job.
CAUTION: When cleaning
windows, always avoid any sudden
changes in temperature to prevent glass
breakage or cracks.
Do NOT add cleaning solutions, scented
perfumes, oils or any other chemicals to
the water used in this appliance as this
may damage the unit or make it unsafe
for use.
Tile Floors: Use the concentrator with
the bristle brush attached to an
extension. Have the steam pocket
ready as well. Clean the grout between
the tiles with the bristle brush. Remove
the bristle brush and attach the steam
pocket, move the steam pocket across
the floor to clean the tile and remove
excess moisture and residue.
Spot Cleaning (Carpets)
Use the concentrator with or without the
bristle brush. Move slowly over the soiled
area, allowing the steam to penetrate.
Agitate with bristle brush or clean towel.
Dab the spot with the towel (do not rub).
Repeat as necessary to remove stain.
Vacuum only after the carpet has
completely dried.
Always test color fastness of carpet in an
inconspicuous area before cleaning.
If your steam cleaner fails to remove
stubborn stains a commercially available
carpet shampoo may be required.
4
9
OPERATING INSTRUCTIONS
OPERATING INSTRUCTIONS
Step 2: Press the steam switch to the “Off”
Components
Water
Care and Maintenance
position, turn the unit off, unplug the
unit from the electrical outlet and let
the unit cool for 15 minutes.
Step 3: Plug the power cord into an
electrical outlet, assure that the
On/Off switch is in the Off
position and press
On/Off Switch: The unit is “On” when the
switch is in the “Pushed down” position.
The light on the On/Off switch will illuminate
when the unit is on. The unit is “Off” when
the switch is in its “Up” position.
Heating Light (red): This light will
illuminate when the unit is heating up the
water.
•
Use tap water for all your cleaning
If you consistently use demineralized or
distilled water, cleaning the tank is
unnecessary.
needs.
•
However, if you live in an area with
hard water, use de-mineralized /
distilled water when steaming light
colored fabrics to eliminate the
possibility of hard water stains.
Rinsing Out the Steam Cleaner
Normally, a periodic rinse of your steam
cleaner will free it from deposits. This is
recommended every 10-15 tankfulls, to
free up any scale deposits from the tank.
Fill the boiler with 20 oz. of water and
shake the cleaner vigorously. Tilt the
cleaner upside down to empty the boiler of
water and any scale deposits.
the steam switch
on the hand grip to
the “ON” position to
Steam Ready Light (green): When this
light is “On”, it indicates that the steam is
ready to use.
CAUTION: Read the instructions
for “Filling or Re-Filling Your Steam
Cleaner with Water” before opening the
Safety Cap.
IMPORTANT: Do NOT add cleaning
solutions, scented perfumes, oils or
any other chemicals to the water used
in this appliance. Use tap water or
distilled/purified water if the tap
water in your area is very hard.
vent any residual steam
that is in the boiler. (Fig 1)
Fig. 1
Step 4: Remove the power cord from the
electrical outlet and turn the steam
switch on the hand grip to the “OFF”
position. (Fig. 1)
Step 5: Place the unit on a flat, stable
surface. Slowly turn the safety
filler cap counter clockwise until it is
removed.
Descaling Your Steam Cleaner
If the tap water in you area contains a high
level of calcium deposits and you have
been using tap water to do your steam
cleaning, you should descale your unit
after 10-15 tankfulls.
Efficient Work
CAUTION: Always unplug before
filling. ALLOW UNIT TO COOL FOR
FIFTEEN (15) MINUTES BEFORE
REFILLING.
IMPORTANT: Do NOT add cleaning
solutions, scented perfumes, oils or any
other chemicals to the boiler in this
appliance. Use tap water or
•
For vertical surfaces, wipe with a
towel from the top down, in this
way the dirty water will not soil
surfaces already cleaned.
To Descale the Steam Cleaner
Step 1: Unplug the steam cleaner from
•
•
•
Avoid changing brushes back and
forth while cleaning.
Start with the smallest brush to
clean tight spots and corners first.
Use a towel to wipe dirt as soon as
possible, otherwise it will dry and
re-adhere to the surface.
Step 6: Insert the funnel
into the tank
the power source before you
opening and
add 84 US Fl Oz
(2.4L) of water.
(Fig. 2) Place
the funnel in
the tank opening
as illustrated in
Fig. 2. The
descale the boiler. Allow to cool.
Step 2: Fill the boiler with 1 part
vinegar and 5 parts water and
leave overnight or for a period
of approximately 8 hours. Do
not screw the safety/filler cap
onto the steam cleaner while
distilled/purified water if the tap water in
your area is very hard.
Assembly of Casters
The casters for your new steam cleaner
are packed and shipped unassembled.
To assemble the casters to the base of
the steam cleaner, simply insert the
caster stems onto one of the four (4)
posts on the base and push downward
with the palm of your hand. Repeat for
the next three (3) casters.
you are descaling the boiler.
Do not use the steam cleaner
while descaling solution is
funnel has been
specially
designed to show
inside the boiler.
when the water
tank is full. When
Fig. 2
Step 3: After the period of soaking, turn
the steam cleaner upside down
to empty solution from the
water starts to come out of the vent
hole of the funnel, the tank is full.
Remove the funnel slowly and let
the remaining water in it go inside
the water tank. Do Not Overfill.
Filling or Re-filling Your Steam
Cleaner With Water
boiler. Due to the fact that a
small amount of solution will be
left in the boiler, it is necessary
to rinse the boiler out with clean
water 2 or 3 times. Your steam
cleaner is now ready for use.
IMPORTANT: Always insure that the
unit is “UNPLUGGED” from the wall
receptacle prior to initial filling or re-filling
the water tank and has been allowed to
cool for 15 minutes. Never attempt to fill
this unit under a water tap, always use
the filling funnel provided.
Step 7: Replace the Safety Filler Cap.
WARNING: Allow unit to cool for
15 minutes before refilling. When
Note: When storing your unit, always
drain any residual water in the boiler and
do not tighten the safety filler cap onto the
unit. Always leave the safety filler cap
loose on the unit when not in use.
refilling the steam cleaner while the boiler is
still hot, there is a risk that water will squirt
back during filling and cause scalding.
Extreme care should be taken when
refilling the unit. Use caution when
opening the Safety/Filler Cap as cap may
become hot during use and escaping
steam can cause scalding.
Before Re-Filling:
Step 1: Press the steam switch on the
hand grip to the “On” position to
vent any remaining steam that is
in the boiler.
8
5
OPERATING INSTRUCTIONS
OPERATING INSTRUCTIONS
Attaching the Accessories to the
Handgrip
Dual Edge Glass & Tile Squeegee
This attachment is very useful for
cleaning windows, plastic material,
ceramic, tiled or marble surfaces.
To use: Connect the tile
squeegee to the hand
grip or use with extension
tube for hard to reach
surfaces. Apply steam
abundantly, rub with the soft spongy
edge, then remove excess water and
dirt with the glass wiping edge.
IMPORTANT: When cleaning
windows, always avoid any sudden
changes in temperature to prevent glass
breakage or cracks.
Care & Maintenance of the Steam
Pocket Towel
Step 8: Connect desired attachments
NOTE: Fit the steam pocket frame with
the angle adapter onto the
extension tube.
onto the flexible steam hose.
Step 9: Plug the unit into a standard (120
volt, grounded) wall receptacle.
Allow approximately 18 minutes
for vapor to reach its working
temperature and pressure. The
green ready light will illuminate
when the unit is ready for use.
Always point nozzle outlet in a
safe direction.
Due to the unique cleaning ability of this
cloth, proper care of your micro fiber towel
is required to ensure long life and
continued cleaning ability.
• The first thing you should do when
you get a new micro fiber towel is to
wash and dry it. During the
manufacturing process the fabric has a
tendency to become flat as it picks up
contaminants from the air and
machinery. There will also be a number
of loose threads that, while they cause
no harm, can be annoying the first time
you use the towel.
• To clean the towel, simply wash it in your
washing machine using the warm water
setting.
• Always wash your towels separately
from other fabrics. They have a tendency
to pick up lint and other particles from
other fabrics and the next time you use
your towel, this lint will transfer to the
surface being cleaned.
• ONLY USE LIQUID DETERGENTS,
never use dry detergents as many times
the granules do not fully dissolve and
become trapped in the towel. This can
scratch the surface that you are
cleaning.
• NEVER USE BLEACH OR FABRIC
SOFTENERS! Bleach will damage the
micro fiber fabric and fabric softeners
deposit a coating on the micro fiber
fabric what will not allow the cloth to
clean efficiently.
WARNING: Always insure the
unit is “UNPLUGGED” from the
wall receptacle prior to attaching or
removing accessories.
2. To attach the steam pocket towel to
the steam pocket frame, slide the
steam pocket towel over the steam
pocket frame. (Fig. 6)
NOTE: When the steam cleaner has run
out of water, steam output will
cease.
Using the Variable Steam Feature
Your steam cleaner has a variable steam
feature that allows you to adjust the steam
flow to the job that you are doing. For
example, set the variable steam at lower
settings when using the window squeegee
and at higher settings when cleaning grout
seams. The variable
steam control is
located on the
handgrip. (Fig. 3)
To increase the
Fig. 6
Concentrator
Attach the concentrator to the handgrip
or to the extension tubes.
Then attach the bristle
brushes to the
3. Bring the towel all the way to the
top of the steam pocket frame.
(Fig. 7)
concentrator.
Nylon Detail Brush (x2)
It is best for cleaning grout in-between
the tiles, ceramic and marble.
To use: Attach the nylon
detail brush on to the end
of the concentrator, which
then may be used directly
on the hand grip or with extension
tubes.
steam flow, turn
the knob counter
clockwise and to
decrease,
Fig. 7
turn it
clockwise.
Fig. 3
4. Bring the velcro strips that are on the
back side of the steam pocket towel
over the steam pocket frame and
attach to the inside of the front side of
the steam pocket towel. (Fig. 8)
Using Your Steam Cleaner with
Steam Pocket
Extended Concentrator
Use the extended concentrator
to clean under toilet rims
or hard to reach places.
To use: Attach the extended
concentrator onto the handgrip or the
extension tubes.
1. Connect one of the extension
tubes to the hand grip on the flexible
steam hose. To attach the extension
tubes one onto the other or onto the
hand grip, press the locking button
ensuring that it fits into the hole.
(Fig. 4, Fig. 5) To disconnect, repeat
the operation by pressing the locking
button and pulling the two sections
apart.
• Air dry the towel. Do not put in a clothes
dryer as high heat will cause the towel to
shrink and the micro fibers to break
down.
• If you wash your towel on a regular basis
and don’t let them get too dirty, they will
last much longer. As with any fabric, dirt
particles, grease and other contaminants
can cause the fibers to break down,
therefore regular cleaning will help
preserve your micro fiber towels.
• As you use the micro fiber towel, you will
notice that sometimes a thread will
loosen or pull out. This is normal and
you should NEVER PULL AT THE
LOOSE THREAD! Pulling the thread can
cause the weave to come undone.
Instead, simply trim the thread with a
pair of sharp scissors.
Fig. 8
5. Insert the electrical power cord into
the wall outlet. Heating time is
approximately 18 minutes with cold
water. Filling the steam generator
with hot water will shorten the heat up
time.
Fig. 4
Fig. 5
6
7
|