N/D367s
N/DYM® Dynamic Cardioid
Vocal Microphone
Key Features:
•
•
•
•
Classic N/DYM® sound
Smooth, controlled frequency response
High N/DYM® sensitivity
Superior multistage shock mount and “Warm
Grip” handle for unmatched low handling
noise
•
•
On/Off switch
Also sounds great when used on a podium
General Description:
The Electro-Voice N/D367s is a member of a family of microphones
that are manufactured with refinements that enhance the sonic
smoothness, improve gain-before-feedback and provide more
consistent performance with greater durability than earlier
generations of N/DYM® microphones.
Technical Specifications:
The controlled response of the N/D367s allows the user to easily
work the microphone for optimal performance.
Element: Dynamic N/DYM magnet structure
The N/DYM® magnet geometry used in the N/D367s, combined
with a reinforced diaphragm design, creates a smooth, extended
frequency response with a warm, open and transparent sound
quality.
The N/DYM® microphones feature EV’s AcoustiDYMTM shock -
mount system. This unique vibration isolating system works as a
multistage device. At low frequencies, a rear sound wave cancels
the diaphragm motion, while, at high frequencies, the specially
designed rubber shock mount isolates the transducer from motion.
CombiningAcoustiDYMTM with the elastomeric Warm-GripTMhandle
and the windscreen bumper produces an advanced technology,
vibration isolating system which dramatically reduces all forms of
handling noise for the most demanding situations.
Freq. Response, Close: 30 Hz - 22,000 Hz
Freq. Response, Far: 60 Hz - 22,000 Hz
Polar Pattern: Cardioid
Sensitivity, Open Circuit 3.0 mV/pascal
Voltage @ 1 kHz:
Dynamic Range: 144 dB
Equivalent Output Noise: 14 dB A weighted
(0 dB = 0.00002 pascal)
Polarity: Positive pressure on diaphragm causes
positive voltage on pin 2 ref. pin 3
Impedance: 350 ohms balanced (low-z)
Microphone Connector: 3 pin XLR type
Finish: Non-reflecting black
The N/D367s has a cardioid polar pattern, providing an enhanced
front-area sensitivity and acoustic rejection directly behind the
microphone, reducing feedback under live performance conditions.
This is particularly useful with typical monitor speaker placement
and high sound pressure (SPL) requirements. Additionally, the N/
D367s’s polar patterns are unusually uniform with frequency,
ensuring superior gain-before-feedback in live applications and
superior isolation when used in the studio.
Accessories Included: Mic Stand Adapter
Soft Zippered "Gig" Bag
Dimensions, Length: 7.12" (181 mm)
Diameter: 2.05" (52 mm)
Shank: 0.80" (20 mm)
Net Weight: 9.1 oz (258 g)
Shipping Weight: 18.9 oz (535 g)
The N/D367s pop filter’s unique design utilizes a specially
processed AcoustifoamTM filter to minimize wind noise and vocal
P-pops. This design makes the pop filter an integral part of the
microphone’s removable front grille assembly, allowing easy
cleaning for continued top performance.
The N/D367s also features a noiseless on/off switch, which is
useful in giving the speaker/vocalist control of their signal to the
mixer.
|