Ei Electronics Smoke Alarm Ei3105RF User Manual

BATTERY POWERED 9V  
RF Communication  
Model Ei3105RF Optical  
RF wireless interconnect  
Unique house coding feature  
Visual RF transmission indicator  
High performance optical chamber with integral  
insect screen  
Test button  
Advanced suppression and calibration technology  
Radio transmitter and receiver in each alarm  
Built in auto self test feature  
Low power cell warning  
Kitemarked to BS EN 14604:2005  
5 year guarantee  
Product Description  
Operation  
The Ei3105RF is an Optical Smoke Alarm that runs on  
9V alkaline battery and is part of the Radio Frequency  
range of smoke alarms. The RF signal will wirelessly  
interconnect the Ei3105RF to other RadioLINK products  
The red indicator will flash every 40 seconds to show that  
the detector has performed an automatic self test  
In normal standby mode the amber indicator will light to  
indicate transmission of an RF signal  
The Ei3105RF uses advanced radio transceiver  
technology with unique software coding to transmit and  
receive the radio signals. The transmissions are  
frequency modulated (FM) and use Manchester coding  
to ensure robust signal integrity and avoid signal noise  
interference  
In code mode, the amber indicator will flash to indicate the  
number of other RF alarms that have been “learned” in the  
system  
The red indicator will flash rapidly to show an alarm  
condition for the smoke detector  
The Ei3105RF has other advanced features such as high  
performance optical chambers fitted with integral insect  
screens to reduce the chances of false alarms, as well  
as the ability to wireless interconnect up to twelve alarms  
to allow all alarms to sound if just one of the  
The “Test/Hush” button will either silence false alarms or  
perform a unit self test  
In “Hush” mode the alarm enters a ten minute period of  
reduced sensitivity and the red light flashes every 10  
seconds and then resets  
interconnected alarms should be triggered.  
The Ei3105RF has built in circuitry to aid suppression of  
voltage transients and RF interference to further reduce  
the chances of false alarms under such conditions  
When interconnected to other Ei mains powered alarms, an  
alarm on one detector will trigger all other interconnected  
alarms within one second (only the triggered alarm will flash  
a red indicator)  
The smoke detector will emit a beep and the red light  
flashes every 40 seconds to indicate that the battery is  
depleted and needs to be changed  
Shannon Free Zone, Shannon, Co. Clare, Ireland.  
Ph.+353 61 471277 Fx.+353 61 471053  
E & OE As our policy is one of continuous product development, we reserve the right to alter product details without prior notice.  
Ei3105RF DataSht RevB  
 

Edimax Technology Network Card EN 9120 User Manual
Edlund Company Can Opener U 12 User Manual
Exmark Lawn Mower TTS16KA363 User Manual
Firstech LLC Automobile Electronics R1600 User Manual
FujiFilm Camcorder ZA12X45B RM RD User Manual
FUNAI CRT Television CR202EM9 User Manual
Gateway MP3 Player 8510388 User Manual
GE Clothes Dryer PFDN440 User Manual
GE Convection Oven JKP75SP User Manual
GE Mixer 168949 User Manual