SafetyInstructions
1
Monaural Power Amplifier
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
DAD–M310
CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICE
ABLE PARTS INSIDE. REFER SERVICING TO QUALI-FIED SERVICE PERSONNEL.
THIS SYMBOL INDICATES THAT DANGEROUS
VOLTAGE CONSTITUTING A RISK OF ELECTRIC
SHOCK IS PRESENT WITHIN THIS UNIT.
THIS SYMBOL INDICATES THAT THERE ARE IMPOR-
TANT OPERATING AND MAINTENANCE INSTRUC-
TIONS IN THE OWNER’S MANUAL WITH THIS UNIT.
Owner’s Manual
WARNING : To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
Thank you for purchasing the DAD–M310.
In order to use it in a safe manner, please read this Owner’s
Manual thoroughly before using.
■ The important safety instructions
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
Also, keep this manual for future reference.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampli-
fiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one
wider than the other. A grounding type plug has two blades and a third grounding prong.The wide blade or the third
prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the
point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the
apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid
injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in
any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain or moisture, does not operated normally, or has been dropped.
Accessory Checklist
Before proceeding with the setup, make sure that the following accessory is included in the package.
If it is missing, please contact the dealer whom you purchased the amplifier from, or Flying Mole Corp.
THE APPARATUS IS NOT WATERPROOF. TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE AND DO NOT PUT ANY WATER SOURCE NEAR THIS APPARATUS, SUCH
AS VASE, FLOWER POT, COSMETICS CONTAINER AND MEDICINE BOTTLE, ETC.
• Remote Connection • Remote Power Control
Cable (2m) x 1 Connector x 2
• Owner's Manual
(this booklet) x 1
• AC Power Cable x 1
IMPORTANT NOTICE
If this product is found to be the source of interference, which can be determined by turning the unit “OFF” and “ON”,
please try to eliminate the problem by using one of the following measures :
Relocate either this product or the device that is being affected by the interference.
Utilize power outlets that are on different branch (circuit breaker or fuse) circuits or install AC line filter/s.
In the case of radio or TV interference, relocate/reorient the antenna.
If the antenna lead-in is 300 ohm ribbon lead, change the lead-in to coaxial type cable.
If these corrective measures do not produce satisfactory results, please contact the local retailer authorized to distribute
this type of product. If you can not locate the appropriate retailer, please contact Flying Mole Corporation.
Features
2
Component Names
● INPUT: UNBAL - VARIABLE
● IN
Used to interlock the power on this product with
● Equipped with high-speed, floating, full-resonance
The level can be adjusted with the LEVEL adjust-
ment knob won the front panel.
switching regulator
the activation/deactivation of power on another de-
vice.
Connect these inputs to a Flying Mole product
equipped with remote power control trigger out-
puts.
● Flying Mole Bi-Phase PWM amplifier technology realizes
a new level of high sound quality with stunning high-
speed responsiveness and wide dynamic range.
Turn “ON” the power switch of the amplifier to use the
(Switch position: center)
amplifier with cables connected to these connectors.
● Equipped with real-time current limiter
● INPUT: BAL - VARIABLE
* Refer to the owner’s manuals of the devices to be
connected as well.
* These connectors cannot be used with products
from other manufactures or for other purposes than
the above-mentioned purpose.
The level can be adjusted with the LEVEL adjust-
ment knob won the front panel.
● Gorgeous parts for uncompromising standards
● General-purpose input interface allows connection with
various types of preamplifiers
iMODE Selector
Used to switch if the power is controlled by the
POWER switch or by REMOTE POWER CONTROL
trigger signals.
(Switch position: right)
ComponentNames
● MANUAL ON MODE
rSPEAKER Outputs
3
Used to connect the output signal from the amplifier.
Connect to the speaker with SP cables.
The power is turned ON or OFF with the POWER
switch qon this product.
■ Front Panel
■ Rear Panel
tOUTPUT Connector (Balanced)
When balanced signals are input, the same signals
as the input signals are output. The signal arrange-
ment of the BALANCE OUTPUT on this product is:
* The power is not switched by REMOTE POWER CON-
TROL trigger signals.
1: GND
2: HOT, and
3: COLD
● REMOTE ON MODE
q
w
r
t y ui
e
The power is interlocked with the activation/deac-
tivation of power on the device connected to the
REMOTE POWER CONTROL (IN) of this prod-
uct.
yAC IN CONNECTOR
qPower Switch / Power Indicator
Used to turn the amplifier’s power ON or OFF.
The ON indicator (blue) lights when the power is
turned on.
eINPUTS / INPUT Selector
Used to connect the supplied AC power cable to the
amplifier.
Used to connect the input signal to the amplifier.
Connect an input to a preamplifier, etc.
Select one of the following settings depending on
which input is connected.
Connect the other end of the AC power cable to
household AC outlet.
When the power amplifier is on standby in REMOTE
ON MODE (refer to i), the SLEEP indicator (orange)
is on.
● INPUT: UNBAL - FIXED
The LEVEL adjustment knob won the front panel is
bypassed.
uREMOTE POWER CONTROL Connectors
● OUT
* Set the POWER switch qof this product to ON posi-
tion.
Used to interlock the power on the device con-
nected to this product with the activation/deacti-
vation of power on this product.
wLEVEL Adjustment Knobs
Used to control the output level.
Setting the knob to “0” turns down the level to the
minimum.
The REMOTE POWER CONTROL function does not
work if the POWER switch qis turned OFF.
Connect these outputs to a Flying Mole product
equipped with remote power control trigger inputs.
(Switch position: left)
|