EDH5210B(W)-003
1
Operation Instruction
EDH5201B
EDH5201W
HDcctv 1080p
Indoor 3-Axis Dome Camera
EDH5210B
EDH5210W
PRECAUTIONS
1. Do not install the camera near electric or magnetic fields.
Install the camera away from TV/radio transmitters, magnets, electric motors, transformers and audio speakers
since the electromagnetic fields generated from these devices may distort the video image or otherwise
interfere with camera operation.
2. Never disassemble the camera beyond the recommendations in this manual nor
Improper disassembly or
introduce materials other than those recommended herein.
introduction of corrosive materials may result in equipment failure or other damage.
In some circumstances, direct sunlight may
cause permanent damage to the sensor and/or internal circuits, as well as creating unbalanced illumination
beyond the capability of the camera to compensate.
3. Try to avoid facing the camera toward the sun.
4. Keep the power cord away from water and other liquids and never touch the power
Touching a wet power cord with your hands or touching the power cord with wet
cord with wet hands.
hands may result in electric shock.
5. Never install the camera in areas exposed to oil, gas or solvents.
Oil, gas or solvents may result in equipment failure, electric shock or, in extreme cases, fire.
6. Cleaning
For cameras with interchangeable lenses, do not touch the surface of the sensor directly with the hands. Use
lens tissue or a cotton tipped applicator and ethanol to clean the sensor and the camera lens. Use a damp
soft cloth to remove any dirt from the camera body. Please do not use complex solvents, corrosive or abrasive
agents for cleaning of any part of the camera.
7.
Do not operate the camera beyond the specified temperature, humidity or power source ratings.
This camera is suitable for indoor operation. Use the camera at temperatures within -10°C~50°C (14°F~122°F) and
in an indoor environment; this device is not rated as weather proof. The input power source is 12VDC. The use of
properly fused or Class 2 power limited type supplies are highly recommended.
8. Mounting
Use care in selecting a solid mounting surface which will support the weight of the camera plus any wind,
snow, ice or other loading, and securely attach the camera to the mounting surface using screws and anchors
which will properly support the camera. If necessary (e.g. when mounting to drop ceilings) use a safety wire to
provide additional support for the camera.
4
ATTENTION! This is a class A product which may cause radio interference in
a domestic environment; in this case, the user may be urged to take adequate
measures.
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one of the following measures :
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the
party responsible for compliance could void the users’authority to operate this
equipment.
5
Table of Contents
1. PRODUCT OVERVIEW .................................................................
1.1 FEATURES ..............................................................................................
1.2 ACCESSORY PARTS LIST .....................................................................
1.3 SPECIFICATIONS ...................................................................................
1.4 DIMENSIONS ..........................................................................................
7
7
8
9
10
2. CAMERA COMPONENT DESCRIPTION ......................................
11
3. INSTALLATION .............................................................................
4. OSD Structure..............................................................................
12
14
6
Ch1apter
1. Product Overview
The EDH5201 is an HDcctv indoor 3-axis dome camera with Day/Night capability available in your choice of white or black
plastic housing to match or contrast with the décor. Based on a 1/2.8”Sony 2.43 megapixel progressive scan sensor and
varifocal 3.6~16mm megapixel lens for HD 1080p resolution 100% digital images, it delivers vastly superior video quality
compared to traditional CCTV images. This superior resolution not only captures more critical evidentiary information, but
the inherent ability for megapixel video also extends the area of coverage, expedites completion of investigations, resolves
complaints and reduces both capital and operational costs. Designed with SENS-UP up to 8X low light enhancement
technology, the EDH5201 can capture color images in very low light without ghosting, or it can switch to monochrome
mode automatically in low light environments.
This highly advanced imaging system also incorporates state of the art optical enhancement technologies: Lens Shading
Correction compensates to eliminate artificial shadows caused by attenuation of light as it traverses the outer portions of
the lens; Digital Slow Shutter light enhancement technology combines with Digital Noise Reduction (3D DNR) to maximize
image clarity while conserving DVR disk storage space; digital WDR to handle challenging lighting conditions; digital zoom
with electronic PTZ to fine tune field of view; Highlight Suppression (HSBLC) to handle imbalance due to bright spots in
the scene; image flip/rotate, and much more.
No major upgrade to the IT network is required to deploy this powerful technology; HDcctv cameras communicate at
digital speeds up to 1.5Gb/s over existing or new coaxial cable (RG59 or other types for longer distances), using industry
standard BNC connectors. With its NTSC/analog secondary output to allow convenient aim and focus using a standard
hand held test monitor, full OSD controls, 3-axis positioning and 94° wide horizontal viewing angle megapixel lens the
EDH5201 delivers flexible, robust coverage in a wide range of low light surveillance applications while delivering stunning
HD image quality.
1.1 Features
• HDcctv 2.1 Megapixel real time 1920x1080/1280x720 HD video over coax for superlative image detail
• Supports video outputs of 1080p30/25 and 720p60/50 (field select)
• Varifocal 3.6~16mm megapixel lens
• Choice of Day/Night operation or Full Color Images in Low Light
• Provides 3-D DNR to improve picture clarity while enabling DVRs to improve disk storage utilization
• 3-Axis Gimbal for Flexible mounting and positioning
• Easy to use OSD setup menu with an array of options
• Enhanced low light sensitivity increase of up to 8x
• Lens Shading Compensation to offset diminished light transmission through lens periphery for uniform image
illumination
• Electronic WDR and HSBLC [Highlight Suppression Back Light Compensation] to handle lighting imbalance and bright
areas in the scene
• Digital zoom increases effective lens magnification up to 20X
• Up to 24 Privacy Zones
• Dead pixel compensation for increased clarity and extended service life
• SD TV Out for aim and focus using a standard hand held test monitor
7
1.2 Accessory Parts List
Please be careful when you unpack the box due to the electronics devices inside.
Check and make sure that you have all the items listed below inside the original box:
Camera
Manual
Pigtail Cable(Power)
Mounting Template Screws
Service Video Cable
If an item appears to have been damaged in shipment, replace it properly in its carton and notify the
shipper. If any items are missing, notify your EverFocus Electronics Corp. Sales Representative or Customer Service. The
shipping carton is the safest container in which the unit may be transported. Save it for possible future use.
Please Note:
8
1.3 Specifications
Pickup Device
Image Pixels
HDcctv Image Area Dimensions
Sensitivity
1/2.8” Sony 2.43 Megapixel Color Progressive CMOS sensor
1920(H)x1080(V) with 2.8μx 2.8μ pixel size
5.38mm (H) x 3.02 mm(W); ø 6.17 mm area diagonal
0.1lux/F=1.2 (Sens-Up OFF)
S/N Ratio
More than 50dB
Video Format Main Output
HDcctv
Video Resolution/Mode Main Output
Main Output Connector
Video Format Test Output
Test Output Connector
Lens Type
Field select 1080p30/25, 720p60/50
BNC-F
NTSC/PAL selectable
Pin connector on board; adapter cable to BNC-F supplied
3.6~16mm Megapixel DC Iris Lens
72°~19° Horizontal
FOV Angle
Shutter Speed
Auto/Manual selectable
OSD
D/N Mode
Exposure Control
Digital WDR
DSS
Yes (5-axis joystick control)
Auto, Color, B/W (Electronic D/N)
Automatic Electronic Shutter
Weight Level Adjustable 0~4
Low light boost up to 8X
Lens Shading Compensation
On / Off
HSBLC (Highlight Suppression Back Light
Compensation)
Off/On
Auto Gain Control
White Balance
Variable relative level 0~10
ATW / Push / Manual
DNR - 3D
Low / Medium / High
Digital Zoom
1X~20X
Off /V Flip/H flip/H+V flip (rotate)
24 areas independently adjustable for size, location, color
English
Image Flip
Programmable Privacy Zones
Language
Dead Pixel Compensation
Power Source & Consumption
Mounting/Positioning
Manual Off/On
DC12V (+/-10%) @ 220mA
3-Axis gimbal
Body: 95.3mm / 3.75“ (Max. H)
x Ø136.4mm / Ø5.37“ Base Diameter (W)
Dimensions
Weight
Housing Color
Operating Temperature
Operating Humidity
343g / 12.1oz
Choice of black or white
14°F to 122°F
20%~80% humidity, non-condensing
9
1.4 Dimensions
Inches:
Ø 3.94"
Ø 5.31"
10
Ch2apter
2. Camera Component Description
Far/Near Adjustment Knob
Tele/Wide Adjustment Knob
OSD Menu Switch
Service Video Connector
OSD Menu Switch
UP
RIGHT
LEFT
UP DOWN
•
•
•
Menu up / down
,
:
MENU
LEFT RIGHT
Change Values
,
:
MENU
(SELEC TION KEY ) /
MENU
Enter
:
DOWN
11
Ch3apter
3. Installation
PART NAME
Mounting Template
Base
1
2
3
4
5
6
7
8
Pan Adjust
Tilt Adjust
Rotate Adjust
Cover
Housing Cover
Dome Cover
12
Connections
DC12V
Adapter
DC12V In (Black)
BNC Female
(HDcctv Jack)
HDcctv DVR or other
HDcctv Signal Equipment
EDH5210
Handheld
Monitor
*Service Video Connector
NTSC Video In
Test Cable
* NOTE
When installing the camera, make sure that all cable ends and connectors
are protected from humidity and other outdoor environments.
13
SETUP
Ch4apter
4. OSD Structure
EXPOSURE
WHITE BALANCE
WDR / BLC
DNR
DAY & NIGHT
IMAGE
SPECIAL
SYSTEM
Reset Date All
EXT
Main
Sub Menu
Sub Menu
BRIGHTNESS
AE MODE
LENS(IRIS)
0 ~ 20
NORMAL AE / INDOOR
MANUAL / AUTO
1/30(25), 1/60(50), 1/120(100), 1/240, 1/500,
1/1K, 1/2K, 1/4K, 1/8K, 1/16K, 1/30K, 1/60K.
BACK / EXIT
LEVEL
MANUAL /
AUTO
SHUTTER
RETURN
EXPOSURE
DSS
AGC
OFF, X2, X3, X4, X5, X6, X7, X8
0 ~ 10
BASE FREQ
RESET DATA
RETURN
60Hz / 50Hz
BACK / DEF.
BACK / EXIT.
COLORTEMP.
LOW / MIDDLE / HIGH
0 ~ 20
0 ~ 20
AUTO
R-GAIN
B-GAIN
RETURN
/AUTOext /
PUSH
WB MODE
/MANUAL
WHITE BALANCE
BACK / EXIT
SATURATION
RESET DATE
RETURN
0 ~ 20
BACK / DEF.
BACK / EXIT.
MODE
WDR WGT
BLC OSD
BLC POS-X
BLC POS-Y
OFF, BLC, DWDR
0 ~ 4
OFF ~ ON
0 ~ 20
0 ~ 20
DWDR / BLC
BLC SIZE-X
BLC SIZE-Y
RESET DATA
RETURN
0 ~ 20
0 ~ 20
BACK / DEF.
BACK / EXIT.
DNR
OFF, LOW, MIDDLE, HIGH
D&N DETECT
AGC / SENSE
DELAY
1sec, 3, 5, 10, 15, 20, 25, 30, 40, 50, 60sec
0 ~ 20(AGC) / 0 ~ 10(SENSE)
0 ~ 20(AGC) / 0 ~ 10(SENSE)
BACK / DEF.
D->N LEVEL
N->D LEVEL
RESET DATA
RETURN
COLOR/B&W/
AUTO
DAY & NIGHT
BACK / EXIT.
14
4. OSD Structure
Main
Sub Menu
Sub Menu
SHARPNESS
FLIP
LENS SHADING
DZOOM
0 ~ 10
OFF, H FLIP, V FLIP, HV FLIP
OFF, ON
1x, 2x, 4x, 6x, 8x, 10x, 12x, 14x, 16x, 18x, 20x
IMAGE
RESET DATA
RETURN
BACK / DEF.
BACK / EXIT.
ZONE NO.
ZONE OP.
X-POS
Y-POS
X-SIZ
0 ~ 23
OFF/ ON
0 ~ 60
0 ~ 40
0 ~ 40
0 ~ 40
PRIVACY
HLMASK
OFF/ ON
Y-SIZ
BLK, WHI, YEL, CYN, GRN,
MAG, RED, BLU
0 ~ 4
BACK / DEF.
BACK / EXIT.
0 ~ 20
BLK, WHI, YEL, CYN, GRN,
MAG, RED, BLU
COLOR
TRANS.
RESET DATA
RETURN
LEVEL
SPECIAL
COLOR
OFF/ ON
OFF, 1, 2
RESET DATA
RETURN
BACK / DEF.
BACK / EXIT.
PATTERN
CAMERA ID.
MOTION CHECK
RETURN
OFF/ ON
OFF/ ON
BACK / EXIT.
DISPLAY INFO.
RESET DATA
RETURN
SDI FORMAT
SDI FPS
BACK / DEF.
BACK / EXIT.
1080p / 720p
30 / 25 (when 1080p), 60 / 50 (when 720p)
CVBS FORMAT
APPLY
NTSC / PAL
OK
S/W VERSION
SET VERSION
BACK / DEF.
BACK / EXIT.
SYSTEM
SYSTEM INFO
RESET DATA
RETURN
15
EverFocus Electronics Corp.
EverFocus Taiwan:
EverFocus Europe - Germany:
Albert-Einstein-Strasse 1, D-46446
Emmerich, Germany
12F, No.79, Sec. 1, Shin-Tai Wu Road,
Hsi-Chih, Taipei, Taiwan
TEL: +886 2 2698 2334
TEL: +49 2822 93940
FAX: +886 2 2698 2380
FAX: +49 2822 939495
EverFocus China - Beijing:
EverFocus China - Shenzhen:
4F, No. 2, D4 Building, Wan Yelong
Industrial Park, Tangtou Road, Shiyan,
Baoan, Shenzhen, Guangdong 518101, China
TEL: +86 755 2765 1313
Room 609, Technology Trade Building,
Shangdi Information Industry Base,
Haidian District, Beijing 100085, China
TEL: +86 10 6297 3336~39
FAX: +86 10 6297 1423
FAX: +86 755 2765 0337
EverFocus USA - California:
1801 Highland Avenue, Unit A, Duarte, CA 91010, USA
TEL: +1 626 844 8888
EverFocus USA - New York:
415 Oser Avenue, Unit S, Hauppauge, NY 11788, USA
TEL: +1 631 436 5070
FAX: +1 626 844 8838
FAX: +1 631 436 5027
EverFocus Japan:
EverFocus Europe - UK:
5F, Kinshicho City Building, 2-13-4 Koto-Bashi,Sumida-Ku,
Tokyo, 130-0022, Japan
Unit 12, Spitfire Business Park,
Hawker Road, Croydon Surrey, CR0 4WD, UK
TEL: +44 (0) 20 8649 9757 / 0845 430 9999
FAX: +44 (0) 20 8649 9907
TEL: +81 3 5625 8188
FAX: +81 3 5625 8189
EverFocus India:
Suite 803, Housefin Bhavan, C-21,
Bandra Kurla Complex, Bandra (East),
Mumbai 400051, India
TEL: +91 22 6128 8700
FAX: +91 22 6128 8705
Ihr EverFocus Produkt wurde
entwickelt und hergestellt mit qualitativ
hochwertigen Materialien und
Komponenten, die recycelt und wieder
verwendet werden können.
Dieses Symbol bedeutet, dass
elektrische und elektronische Geräte
am Ende ihrer Nutzungsdauer vom
Hausmüll getrennt entsorgt werden
sollen.
Your EverFocus product is designed
and manufactured with high quality
materials and components which can
be recycled and reused.
This symbol means that electrical and
electronic equipment, at their end-of-
life, should be disposed of separately
from your household waste.
Please, dispose of this equipment at
your local community waste
Bitte entsorgen Sie dieses Gerät bei
Ihrer örtlichen kommunalen
Sammelstelle oder im Recycling Centre.
Helfen Sie uns bitte, die Umwelt zu
erhalten, in der wir leben!
collection/recycling centre.
In the European Union there are
separate collection systems for used
electrical and electronic product.
Please, help us to conserve the
environment we live in!
|