Elation Professional Work Light Pro FS 575 User Manual

Pro FS  
575  
Ro  
ollowSPoT  
P
F
Thank you for purchasing the Pro FS 575 by  
Elation Professional. For your convenience this  
follow spot has been fitted with its proper lamp  
and is ready to be used, there is no assembly  
required. Please read the following instructions  
before installing and using your new unit.  
Operating Instructions:  
The Pro FS 575 features a bright ZB-MSR575  
575 watt lamp, full focusing knob located on the  
top as well as zoom control, control levers at  
the top of the unit for iris adjustment, and built-  
in individual gel frames.  
Notice: When the unit is brand new, smoke  
will emit from the inside of unit. This is the  
paint on the inside burning off. There is no  
problem with the unit, this is normal.  
Discharge Lamp Warning: This fixture is fitted with a dis-  
charge lamp which is highly susceptible to damage if improp-  
erly handled. Never touch the lamp with your bare fingers  
as the oil from your hands will shorten lamp life. Also, never  
move the fixture until the lamps have had ample time to cool.  
Remember, lamps are not covered under warranty conditions.  
This unit emits intense UV radiation which is harmful to the eyes  
and skin. The intense luminance of the lamp can cause severe  
damage to the retina. Never operate this unit without it’s covers,  
these covers have been specially designed to shield against UV  
radiation.  
To replace lamp; Unscrew the two thumb  
screws located at the rear of the unit, slide  
out the lamp assembly, replace bulb and reas-  
semble. Do not forget to unplug unit before  
replacing bulb!  
Epileptic Warning: Those suffering from epilepsy should avoid  
looking directly into the lamp at all times.  
The Breaker is located at the rear of the unit.  
For service, contact your Elation dealer.  
Avoid switching the fixture on and off repeatedly in short inter-  
vals as this will reduce lamp life and intensity.  
Caution! Always disconnect from main power  
before replacing lamps or servicing unit.  
Remember to always replace with same type  
of lamp.  
To achieve the intensity associated with discharge lamps, these  
lamps use gas sealed in a high pressure environment to emit a  
brilliant output. Due to the high pressure involved with the con-  
struction of the lamp, the lamp may explode during prolonged  
extensive use. This risk is increased with age, added care is  
encouraged when dealing with older lamps. Extreme caution  
should be used when operating this or any fixture fitted with a  
gas discharge lamp. Never open this unit while in use.  
CAUTION! WARNING! The top of unit gets  
extremely hot, watch where you rest your  
hands, or objects that can melt or burn.  
 

Compaq Personal Computer 4110D User Manual
Craig Portable Multimedia Player CMP615D User Manual
Crate Amplifiers Musical Instrument Amplifier XK15 User Manual
Delta Electronics Power Supply DRP024V060W1BA User Manual
Electro Voice Speaker EVID User Manual
Fellowes Paper Shredder 4800CC User Manual
Fellowes Paper Shredder FS 3 User Manual
Frigidaire Cooktop 318068118 User Manual
GE Trash Compactor ZCG3100 User Manual
Global Machinery Company Power Screwdriver 710W User Manual