Dynex Switch DX GB8PRT User Manual

DX-GB8PRT_10-1124_QSG_V1.eps  
1
10/299/2010  
1:05::26 PM  
V1  
FINAL  
FOR PRINT  
Congratulations on your purchase of the DX-GB8PRT Dynex 8-Port  
Gigabit Ethernet Switch. The DX-GB8PRT provides increased speed and  
backbone connections to make Gigabyte a reality.  
Installing the switch  
1 Connect the power adapter to the switch and power outlet.  
Power cord  
Safety Notices  
Power  
• Do not use this product near water, for example, in a wet basement  
or near a swimming pool.  
Switch  
outlet  
• Avoid using this product during an electrical storm. There may be a  
remote risk of electric shock from lightning.  
• Do not place heavy objects on the switch.  
• Allow room for adequate ventilation.  
2 Connect the PC(s) and other device(s) to the switch.  
DX-GB8PRT  
8-Port Gigabit Ethernet Switch  
Package contents  
PC  
Switch  
Network  
storage  
DX-GB8PRT Dynex 8-Port Gigabit Ethernet Switch  
Quick Setup Guide  
3 Connect the switch to the Internet.  
Features  
Complies with IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.1p  
standards  
Internet  
Eight 10/100/1000M RJ45 ports  
Supports IEEE 802.1p QoS  
Support Green Ethernet technology to implement power saving  
features. (In Low Power Idle mode, up to 66.22% of the power can be  
saved.)  
Internet  
Modem  
Router  
Switch  
4 Install complete connection.  
Internet  
Supports IEEE 802.3x flow control for full-duplex mode and  
backpressure for half-duplex mode  
Non-blocking switching architecture that forwards and filters  
packets at full wire-speed for maximum throughput  
8K entry MAC address table of the DX-GB8PRT with auto-learning  
and auto-aging  
Network  
storage  
Switch  
Router  
PC  
Modem  
Supports for Jumbo frames of up to 15 KB  
LED indicators for monitoring power, link, and activity  
LED indicators  
When the switch is plugged in and receiving power, the LED indicators  
respond as follows:  
Components  
Front panel  
LED  
Status  
Indication  
Power  
On (green)  
Off  
Power on  
No device is connected to the corresponding port.  
A 10/100 Mbps device is connected to the corresponding port.  
On (orange)  
Link/Act Flashing (orange) A 10/100 Mbps device is transmitting or receiving data  
Ports 1-8  
through the corresponding port.  
Power LED  
LEDs 1-8  
Back panel  
A 1000Mbps device is connected to the corresponding port.  
On (green)  
A 1000Mbps device is transmitting or receiving data through  
the corresponding port.  
Flashing (green)  
Power port  
Ports 1-8  
QUICK SETUP GUIDE  
 

Clarion CD Player DXZ938R User Manual
Creative GPS Receiver BT D1 User Manual
Crown Equipment Hot Beverage Maker EC 10TW User Manual
Cuisinart Toaster CPT 122 User Manual
Cuisinart Work Light PG 25400A User Manual
Curtis Handheld TV RT070 User Manual
Edelbrock Automobile Parts 1580 User Manual
EVGA Computer Hardware 50081 14 User Manual
Extron electronic Stereo Amplifier MPA 122 User Manual
Fisher Price Motorized Toy Car T1961 User Manual