IB-CCG2-A - 23.03.11_Layout 1 31/03/2011 13:02 Page 1
Coffee Grinder
Instruction Manual & Guarantee
IB-CCG2-A - 23.03.11_Layout 1 31/03/2011 13:02 Page 4
KNOWYOUR
COFFEE GRINDER
SETTING UP
NOTE:THE GRINDER WILL NOT OPERATE WITHOUTTHE HOPPER OR
GROUND CONTAINER CORRECTLY IN POSITION.
THE GROUND
THE HOPPER
CORDTIDY
3
1
2
CONTAINER
250G HOPPER & LID
REMOVABLE
UPPER BURR
Unreel the required length
of cord. It is important to
keep the cord short. Pack
the excess cord length in the
cord tidy, then plug-in.
Place the hopper with lid on
the main body, align the
arrow on the main body to
the arrow on the hopper
and rotate the hopper
Clean and dry ground
container before using. Slide
the coffee container in. Place
the grinder on a level
surface.
For quick and easy cleaning
clockwise so the arrow is
above the grind control.
LOWER BURR
Rotates at slow speed to preserve
flavour and aroma of the coffee
GRIND CONTROL
Fill with beans after setting the courseness control.The grinding control must not be
operated when the motor is running.
GRIND
Main ‘On’ and
manual ‘Off’ button
COURSENESS SETTING
ADD BEANS
1
2
GROUND
CONTAINER
& LID
Adjust the degree of grinding by twisting the hopper and
aligning the arrow on the hopper with the desired setting.
Add your beans in to the
hopper. Check no foreign
objects are in the hopper
before grinding. Remember
only grind what you need.
Replace the lid.
= Fine grinding (e.g. for espresso coffee machine)
= Medium grinding (e.g. for filter coffee machines)
DOSING
NON SLIP FEET
CONTROL
= Course grinding (e.g. for coffee percolator)
5
4
IB-CCG2-A - 23.03.11_Layout 1 31/03/2011 13:02 Page 6
DOSING & GRINDING
GUARANTEE
ONLY GRIND WHATYOU NEED.TO PREVENT OVERHEATING, DO NOT
GRIND FOR MORETHAN 3 MINUTES OR 2 X 10 DOSE CYCLES IN A ROW
This appliance is of excellent quality and construction. However, if any defects in materials
or workmanship do appear during the relevant guarantee period, we will, at our discretion,
either repair or replace the defective parts, free of charge, subject to the terms and
conditions of our Guarantee shown below.
MANUAL STOP
DOSING
GRINDING
3
2
1
This Guarantee covers both parts and
labour. Carriage is not included.
•
Your mains electricity supply is
functional.
Your guarantee period is as follows:
•
The defect is not due to a blown fuse.
•
1 years
If you wish to claim under this guarantee
you should:
This Guarantee provides benefits which are
additional to, and do not affect, your
statutory rights.This guarantee does not
cover the cost of returning the product to
the dealer from whom it was purchased or
to ourselves.This guarantee applies only to
products sold and located in mainland
Great Britain. It does not cover liability in
respect of or replacement of plugs, cables
or fuses and also does not cover defects
due to:
•
•
•
Send the product, postage or carriage
paid, to the dealer from whom it was
purchased or to Dualit direct.
The dosing control is a
rough guide for how many
cups of coffee will be
required. e.g. setting 8 for 8
cups. Set to required
number of cups.
To start press the ‘Grind’
button. Once the portion is press the ‘Grind’ button. If
complete the grinder will
automatically stop.
To manually stop grinding
Ensure that the product is clean and
packed carefully (preferably in its
original carton).
the ground container is at
‘Max’ empty to prevent
overheating.Tap the coffee
container before decanting.
Enclose details of your name, address
and telephone number and when and
where the product was purchased,
together with proof of purchase (e.g. a
till receipt).
CLEAN AFTER EACH USE
•
•
•
•
•
•
Failure to use or maintain product in
accordance with Dualit's instructions.
ALWAYS DISCONNECT FROMTHE MAINS SUPPLY BEFORE CLEANING.
NO PARTS OFTHE GRINDER ARE SUITABLE FOR A DISHWASHER.
•
Give exact details of the nature of the
defect.
The product being connected to an
unsuitable electricity supply.
This Guarantee does not cover any other
claims whatsoever, including, without
limitation, any liability for incidental, indirect
or consequential damage, nor does it cover
any claims for conversion or modification or
for the costs of repair carried out by any
third party without the prior consent of
Dualit. If replacement parts are fitted to the
product this will not extend the period of
the guarantee.
REMOVE BEANS
REMOVE HOPPER
BRUSH BURRS
1
2
3
Accidental damage to or abuse or
misuse of the product.
The product has not been modified
except by Dualit or approved agent.
Dismantling of or interference with the
product.
Theft or attempted theft of the
product.
Remove any beans from the Rotate the hopper
The upper burr can then be
removed by lifting it straight
up. Use a soft-bristle brush
to clean the burrs.Wipe the
body clean with a damp
cloth.
For further advise contact the Dualit
customer helpline on +44 (0)1293 652 500
(09:00 to 17:00 Monday to Friday).
Before returning any product under this
guarantee, please check that:
hopper by turning it upside
down over a bowl or plate.
anti-clockwise untill the
arrows meet then lift the
hopper up and off.
•
You have followed the product
instructions correctly.
Alternatively, email Dualit at [email protected]
6
7
IB-CCG2-A - 23.03.11_Layout 1 31/03/2011 13:02 Page 8
Dualit Limited County Oak Way Crawley West Sussex RH11 7ST
Telephone: +44 (0) 1293 652 500 Facsimile: +44 (0) 1293 652 555
@
GB0311
|