Digi Switch MIL S3160 User Manual

InstallationGuide  
MIL-S3160 16-port 10/100  
Dual Speed Switch  
MIL-S3170 24-port 10/100  
Dual Speed Switch  
INTRODUCTION  
Thanks for purchasing one of the MIL-S3100 family of dual speed switches. They provide dedicated bandwidths of  
10/100 Mbps throughput per port to the desktop. With features such as auto-negotiation and half/full-duplex, these  
switches offer smooth network migrations and easy upgrades to network capacity.  
!
!
!
!
!
!
!
IEEE802.3X flow control in full-duplex operation  
One uplink push button is provided for cascading  
Auto-negotiation supported for each port  
Visual diagnostic LED’s supported  
13-inch rack-mount width  
The MIL-S3100 family of 16 or 24 port 10/100 dual  
speed switches has the following features:  
!
Complies with IEEE802.3, IEEE802.3U, and  
IEEE802.3X standards  
Standard IU chassis height  
Internal switching power supply  
!
!
16 or 24 10/100 Mbps auto-negotiation switch ports  
Back pressure (collision based) flow control in half-  
duplex operation  
MS61624V01ADS  
 
16 or 24 RJ-45 10/100 Dual Speed Switching Ports  
Connecting to a Desktop  
There are 16 or 24 RJ-45 ports on the front panel. The  
speed and full or half-duplex modes of the ports are  
automatically determined when users connect the switch  
to 10Base-T and 100Base-TX devices.  
The switch is connected to the desktop, to form a small  
network. You can build the network as shown in the  
figure.  
To improve the network efficiency, it is better to have 200  
Mbps full-duplex operation between the server and  
switch, if the LAN adapter on the server can operate in  
full-duplex mode.  
The 16 or 24 RJ-45 auto-negotiation ports simplify  
migration of 10 Mbps Ethernet to 100 Mbps Fast  
Ethernet.  
Normal/Uplink Push Button  
One normal/uplink push button on the front panel allows  
users to select the 16th or 24th port to connect to a PC or a  
hub or switch. With this normal/uplink push button  
feature, users can connect with network devices.  
A link LED is lit when there is a successful connection.  
The default setting is in the normal (MDI-X) position, i.e.  
the long button position. The port is configured to  
connect with a PC using a straight through twisted pair  
cable.  
Connecting to a Switch or a Hub  
When the push button is pressed (MDI), i.e., the short  
button position, connection is made with a hub or a  
switch using a straight through twisted pair cable.  
Switch-to-switch or switch-to-hub connections are made  
by connecting the 16th or 24th port to a port or to the other  
hub or switch with the normal/uplink push button pressed  
in.  
With 100Base-TX, the maximum network length is  
approximately 205 meters with UTP cable. The maximum  
length between hubs or switch-to-hub is 100 meters.  
Push button in the short  
position(MDI)  
8186  
9
9
16  
16  
Normal/Uplink  
16-port 10/100 Dual  
Speed Switch  
8186  
9
9
16  
16  
Normal/Uplink  
Push button in the long  
position (MDI-X)  
3
 
MOUNTING KIT INSTRUCTION  
The 16 or 24-port 10/100 Dual Speed Switch is supplied  
with two mounting brackets, six screws, and four rubber  
feet for mounting the rack or putting it on a flat surface.  
Rack mounting in a rack  
!
!
!
Locate the mounting bracket over the mounting  
holes.  
Insert the screw through the bracket and into the  
bracket mounting holes in the switch  
Insert the unit into the 19-inch rack  
On a flat surface  
!
!
Apply four rubber pads to the bottom of the unit.  
Put the switch on the flat surface.  
8186  
9
9
16  
16  
Normal/Uplink  
FCC COMPLIANCE STATEMENT  
This equipment generates and uses radio frequency energy and if not installed and used properly, that is, in strict  
accordance with the instructions provided with the equipment, may cause interference to radio and TV reception. The  
equipment has been tested and found to comply with the limits for a Class A computing device in accordance with the  
specifications in Subpart B of Part 15 of FCC rules, which are designed to provide reasonable protection against such  
interference in a residential installation. However, there is no guarantee that interference will not occur in a particular  
installation. If you suspect this equipment is causing interference, turn your switch on and off while your radio or TV is  
showing interference. If the interference disappears when you turn the switch off and reappears when you turn the switch  
on, something in the switch is causing interference.  
You can try to correct the interference by one or more of the following measures:  
!
Plug the computer which has the equipment installed into a different power outlet so that the equipment and the  
receiver are on different branch circuits.  
!
!
Reorient the receiving radio or TV antenna where this may be done safely.  
If necessary, you should consult the place of purchase or an experienced radio/television technician for additional  
suggestions.  
SAFETY INSTRUTIONS  
1. This product should be operated from the type of  
power source indicated on the marking label. If you  
are not sure of the type of power available, consult  
your dealer or local power company.  
4. If an extension cord is used with this product, make  
sure that the total ampere ratings on the products  
plugged into the extension cord do not exceed the  
extension cord ampere rating. Also make sure that  
the total of all products plugged into the wall outlet  
does not exceed 15 amperes.  
2. This product is equipped with  
a
three-wire  
third  
grounding type plug, plug having  
a
a
(grounding) pin. This plug will only fit into a  
grounding type power outlet. This is a safety feature.  
If you are unable to insert the plug into the outlet,  
contact your electrician to replace your obsolete  
outlet. Do not defeat the purpose of the grounding  
type plug.  
5. Never push objects of any kind into this product  
through cabinet slots as they may touch dangerous  
voltage points or short out parts that could result in a  
risk of fire or electric shock. Never spill liquid of  
any kind on the product.  
6. Do not attempt to service this product yourself, as  
opening or removing covers may expose you to  
dangerous voltage points or other risks. Refer all  
servicing to servicing to service personnel’s.  
3. Do not allow anything to rest on the power cord. Do  
not locate this product where persons will walk on  
the cord.  
4
 
TECHNICAL INFORMATION  
Standards Compatibility  
ISO/IEC 802.2-3  
IEEE 802.3  
IEEE 802.3U  
IEEE 802.3X  
16-port 10/100 Dual Speed Switch  
Input Ratings  
100 to 240 VAC  
50 to 60 Hz  
23.8 W  
Power consumption  
24-port 10/100 Dual Speed Switch  
Interfaces  
Input Ratings  
100 to 240 VAC  
RJ-45 fully-shielded connectors for 10Base-T and  
100Base-TX Fast Ethernet  
Physical  
50 to 60 Hz  
33.3 W  
Power consumption  
Environmental Specifications  
Operating temperature 0° to 40°C  
Length  
Height  
Depth  
330mm (13 in.)  
43mm (1.69 in.)  
230mm (9.06 in.)  
2.6Kg (5.69lb)  
Storage temperature  
Operating Humidity  
Storage Humidity  
-20° to 70°C  
10% to 90% RH  
10% to 95% RH  
Weight  
Electromagnetic Emission  
FCC Class A, CE Class A, VCCI Class A  
Safety Approval  
UL, CUL, TUV  
Five-Year Limited Warranty  
Trademarks  
Digi International warrants to the original consumer or  
purchaser that each of its products and all components  
thereof, will be free from defects in material and /or  
workmanship for a period of five years from the original  
factory shipment date. Any warranty hereunder is  
extended to the original consumer or purchaser and is not  
assignable.  
Digi International and the Digi Logo are trademarks of  
Digi International. All other products and brands are  
trademarks of their respective holders. All rights reserved.  
To Contact Digi  
For prompt response when calling for service  
information, have the following information ready:  
Product serial number and rev  
Date of purchase  
Vendor or place of purchase  
Digi makes no express or implied warranties including,  
but not limited to, any implied warranty of  
You can reach Digi LAN technical support at  
(408) 744-2751.  
Or E-mail at [email protected]  
merchantability or fitness for a particular purpose, except  
as expressly set forth in this warranty. In no event shall  
Digi be liable for incidental or consequential damages,  
costs, or expenses arising out of or in connection with the  
performance of the product delivered hereunder. Digi will  
in no case cover damages arising out of the product being  
used in a negligent fashion or manner.  
Address: 1299 Orleans Drive, Sunnyvale, CA 94089  
Voice: (408) 744-2775  
Fax: (408) 744-2793  
Copyright 1999 Digi International  
P/N 90000139 Rev A  
2
 
 

Clarion Cassette Player VDH910 User Manual
Cornelius Ice Maker P N 629088662 User Manual
Desa Oven SDVBND User Manual
Desa Water Heater CDR3924NT User Manual
Duracell Power Supply MN 1300 User Manual
Eclipse Fujitsu Ten GPS Receiver CD2030 User Manual
Edelbrock Automobile Parts Jeep Grand Cherokee User Manual
Everpure Water System EV9324 22 User Manual
Frigidaire Dishwasher 154881701 User Manual
GE Air Conditioner AZ85E12EAC User Manual