™
®
Project __________________________________
Item ____________________________________
Quantity ________________________________
CSI Section 11400
Delfield
Approved _______________________________
Date ____________________________________
ST4472N Mega Top
Front-Breathing Self-Contained Compact Mega Top Refrigerators
Models
•
•
•
•
ST4472N-18M
STD4472N-18M Three section with drawers eighteen pan capacity
ST4472N-24M Three section with doors twenty-four pan capacity
Three section with doors eighteen pan capacity
STD4472N-24M Three section with drawers twenty-four pan capacity
Options &
Accessories
Standard Features
•
Patented air screen ensures product stays cold without
drying it out
•
All 4400 Series units are 100% front breathing, which allows
the unit to be pushed against a wall or built into a cabinet
or an existing line up
•
•
•
•
•
•
•
•
•
Flat lift off cover
18” wide single tier overshelf
Stainless steel finish on back
Plastic laminate on front
Additional wire shelves
Door lock
•
•
Durable, rugged stainless steel sides, top and front
Features Delfield’s exclusive ABS interior (on sides). ABS
is extremely durable - it won’t dent, chip or corrode and is
backed by a limited lifetime warranty
•
•
Delfield supplies 1/6 size pans and adapter bars for top
opening
Mega top refrigerators are standard with 8” wide, dishwasher
safe polyethylene cutting board treated with anitmicrobial
agent
Exterior thermometer
Glass door(s)
•
“D” prefix models feature Delfield’s new drawer system.
Drawers are backed by
assembly
a
10-year warranty on the track
ST4472N-18M
•
•
Environmentally friendly R404A refrigerant
High density foamed in place environmentally friendly, Kyoto
Protocol Compliant, Non ODP (Ozone Depletion Potential),
Non GWP (Global Warming Potential) polyurethane keeps
energy costs low
*220V/50Hertzelectricalsystem
*Inclusion of this option will
alter electrical specifications
of the unit.
•
•
•
•
Black recessed quick grip handle
Standard on 2” casters for easy cleaning and installation
7’ cord and plug supplied
One epoxy coated wire shelf standard, installed per door
section
•
•
•
ACT solid state electronic control
"ST" models have a 4" stainless steel backsplash
One year parts and 90 day labor standard warranty.
Specifications
Exterior top is one-piece 22-gauge stainless steel with integral 2.12”
(5.1cm) square nosing on the front. Telescoping lid is constructed of
20-gauge stainless steel. Top opening can accept 18, 24 or 30 1/6 size
plastic pans 4”-6” (10.1cm-15.2cm) deep. Adapter bars and 1/6 size pans
are supplied by Delfield. Temperature in top openings maintains 33°F
(1°C) to 41°F (5°C), with pans recessed 2.5” (6.4cm) at 86°F ambient room
ACT control. ACT electronic, solid state control, mounted on the exterior
rear of the cabinet, allows unit to maintain precise temperatures in heavy
duty conditions.
Electrical connections are 115 volt, 60 Hertz, single phase. Unit has
a
7’
(2.1m) long electrical cord and NEMA 5-15P plug.
temperature, meeting NSF
7
requirements. One 72”
x
8”
x
.5” (183cm
x
20.3cm 1.3cm) polyethylene cutting board treated with antimicrobial
x
Casters: Equipment is mounted on 2” (5.08cm) diameter plate casters with
agent is mounted on the top at the front edge.
front two locking. Equipment clearance above the floor is 2.5” (6.35cm).
Exterior back and bottom are two-piece 24-gauge galvanized steel.
Doors have
a
24-gauge stainless steel exterior, with thermoformed ABS
Exterior ends are stainless steel.
plastic interior liner. Cabinet has one adjustable epoxy-coated wire shelf
per door opening.
Interior sides are thermoformed ABS plastic with shelf supports. Base is
fully insulated with high-density foamed in place environmentally friendly,
Kyoto Protocol Compliant, Non ODP (Ozone Depletion Potential), Non GWP
(Global Warming Potential) polyurethane.
Drawers have 24-gauge stainless steel exterior with thermoformed ABS
plastic interior liner. Drawer frames are 12-gauge stainless steel. Drawer
slides are 11-gauge stainless steel with Delrin bearings. Each top drawer
holds one 12” x 20” (30.5cm
x
50.8cm) pan and three 1/9 size pans 4”-6”
Refrigeration system uses HFC-404A refrigerant. Compressor is 1/2 H.P.,
with condenser coil and hot gas condensate evaporator mounted on rear
of the cabinet. Evaporator coils and temperature control are located on
(10.2cm-15.2cm) deep. Each bottom drawer holds one 12” x 20” (30.5cm
x
50.8cm) pan and three 1/9 size pans 4” (10.2cm) deep. Pans are supplied
by others.
the interior rear wall of the cabinet. Refrigerant flow is controlled by
a
capillary tube. Cabinet maintains an interior cabinet temperature of 36°F
to 40°F (2°C to 4°C).
980 S. Isabella Rd.
Mt. Pleasant, Michigan 48858
Fax: 800-669-0619
Phone: 800-733-8948 or 989-773-7981
™
®
Delfield
ꢉꢄꢂꢀꢁ
INSTALLATION NOTE:
ꢄꢂꢅꢄ
ꢀꢁꢂꢃꢁ
Refrigeration system is designed so that air will flow under the
unit, through the compressor area and out the front of the unit.
Any restriction to this air flow path will void the warranties.
PLEASE NOTE:
ꢄꢀꢂꢃꢁ
Air flow through the louver on the back of the unit is not
necessary for operation, however, any air which passes through
the louver is beneficial.
ꢀꢀꢂꢈꢁ
ꢀꢂꢁꢇ
31.50" [80.01]
29.55" [75.1]
ꢅꢂꢇꢃ
ST4472N-24M/STD4472N-24M
Pan Cutout Configuration
3.88 [9.86]
1.19 [3.02]
72.13" [183.21]
1.83 [4.65]
10.44 [26.52]
26.86"
[68.22]
20.75"
[52.70]
8.54 [21.69]
4.00" [10.20]
23.79"
[60.43]
21.94"[55.73]
ALT. SHELF
17.35" [44.08]
12.98"
[33.00]
36.00"
[91.40]
SHELF
7.53"
6.11"
[19.10]
33.59"
[85.31]
[15.52]
2.50" [6.30]
ST4472N-24M Right Side View
ST4472N-24M Elevation View
NOSE OF UNIT
TO EDGE OF DRAWER
NOSE OF UNIT
TO EDGE OF DOOR
19.60" [49.77]
22.66" [57.56]
67.75" [172.09]
STD4472N-24M ISO View
ST4472N-24M ISO View
31.50" [80.01]
29.55" [75.1]
72.13" [183.21]
3.88 [9.86]
1.19 [3.02]
1.83 [4.65]
10.44 [26.52]
8.54 [21.69]
4.00" [10.20]
4.00" OR 6.00" DEEP PANS ON TOP
4.00" DEEP PANS ONLY ON BOTTOM
36.00"
[91.40]
33.59"
[85.31]
2.50" [6.30]
STD4472N-24M Elevation View
STD4472N-24M Right Side View
Specifications
Model
1/6 Size Pan Number of
Shelf
Area
8.42ft2
Storage
H.P.
V/Hz/Ph Amps NEMA
Ship
Weight
Capacity
Shelves
Capacity
18.7ft3
4
Plug
18
18
24
24
2
1/2
1/2
1/2
1/2
12.0
12.0
12.0
12.0
ST4472N-18M
STD4472N-18M
ST4472N-24M
STD4472N-24M
115/60/1
115/60/1
115/60/1
115/60/1
5-15P
5-15P
5-15P
5-15P
485lbs/220kg
545lbs/247kg
485lbs/220kg
545lbs/247kg
NA
2
NA
8.42ft2
NA
18.7ft3
NA
4
Delfield reserves the right to make changes to the design or specifications without prior notice.
980 S. Isabella Rd.
Mt. Pleasant, Michigan 48858
Phone: 800-733-8948 or 989-773-7981
Fax: 800-669-0619
™
®
Delfield
Phone: 800-733-8948 or 989-773-7981
Fax: 800-669-0619
Printed in the U.S.A.
DSST4472N-M
10/08
980 S. Isabella Rd.
Mt. Pleasant, Michigan 48858
|