™
®
Project __________________________________
Item ____________________________________
Quantity ________________________________
CSI Section 11400
Delfield
Specification Line®
Self-Contained Sliding Door Two Section Shallow
Reach-In Refrigerator
Approved _______________________________
Date ____________________________________
Models
Solid door
SSR2S-SLS
SSR2S-SLSH
SAR2S-SLS
SAR2S-SLSH
SMR2S-SLS
SMR2S-SLSH
Glass door
SSR2S-SLG
SSR2S-SLGH
SAR2S-SLG
SAR2S-SLGH
SMR2S-SLG
SMR2S-SLGH
Stainless exterior and interior full sliding door
Stainless exterior and interior half sliding door
Stainless exterior and aluminum interior full sliding door
Stainless exterior and aluminum interior half sliding door
Stainless front aluminum exterior and interior full sliding door
Stainless front aluminum exterior and interior half sliding door
Standard Features
Options &
Accessories
•
•
•
•
Stainless steel interior and exterior (SS)
Stainless steel exterior, aluminum interior (SA)
Aluminum interior and exterior, stainless front (SM)
Pressure relief valve is standard to prevent door
vapor lock
•
•
•
•
•
•
•
•
•
•
•
•
•
Additional shelves
Tray slides
Stainless steel back
Laminate on front, sides and back
Bottom mount electrical
Stainless steel banking strip
Heat shield end
Stainless steel kick plate
Laminate kick plate
4” stainless steel utility base
220-60-1 electrical
•
Exterior digital thermometer with high/low
temperature alarm
•
•
•
Easy access “flip up”shroud
Easy to use electronic control
Three wire shelves per section - SA/SS standard
with chrome plated shelves and SM standard with
epoxy coated shelves
•
•
•
•
10’attached cord and plug
6”adjustable stainless steel legs
Stainless steel breaker strips
High density foamed in place environmentally
friendly, Kyoto Protocol Compliant, Non ODP
(Ozone Depletion Potential), Non GWP (Global
Warming Potential) polyurethane keeps energy
costs low
230-50-1 electrical
Security package
•
•
•
Energy savings door heater switch
Environmentally friendly 404a refrigerant
Fluorescent light with on/off switch (glass door
units only)
Two year parts & labor warranty
Five year compressor warranty
SSR2S-SLG
•
•
Specifications
Exterior: SS and SA models shall have corrosion resistant stainless
steel exterior cabinet sides, front and shroud. SM models shall have
corrosion resistant aluminum on exterior cabinet sides and will have
stainless front and shroud. All units shall have the upper shroud
hinged with a gas assist stay open feature to provide easy access to
the refrigeration system.
Glass Sliding. Double thermopane glass set in high impact black
plastic frame.
Doors are set in tracks for easy movement. Spring action assures
self closing. Gasket seals both ends of doors. Doors are removable
for cleaning.
Refrigeration system: All components are mounted to the exterior
cabinet ceiling, outside the food zone and are assembled as one
piece and can be removed as one piece. Environmentally friendly
R404A refrigerant is used. System has the capability of maintaining
between 27˚F and 40˚F in heavy use food service operations.
Refrigerant is metered using a highly responsive thermostatic
expansion valve. System is controlled using Delfield’s ACT-Advanced
Control Technology electronic temperature control, which provides
improved pull down times, reducing compressor cycling and longer
compressor life with lower energy consumption.
Interior: Cabinet interior shall be corrosion resistant stainless steel
(SS models) or heavy gauge aluminum (SA and SM models). Bottom
and top surfaces shall be die stamped to provide radius corners and
recessed floor. Three wire shelves are provided per section, SA/SS
standard shelves are chrome plated, SM standard shelves are epoxy
coated. Shelves rest on clips which are adjustable on 1” increments
on stainless steel pilasters affixed to the cabinet interior. Pilasters
are removable without tools for cleaning. Mounted to the interior
ceiling, the interior fluorescent light is controlled automatically
through a switch mounted in the hinge assembly to protect against
breakage. Door openings are protected with heavy gauge stainless
steel breaker strips. An air duct shall be mounted to the ceiling
assuring low velocity, even air movement throughout the cabinet
interior.
Control system uses adaptive defrost to assure evaporator coil is free
of ice and operating at optimum efficiency. Evaporator condensate
is eliminated using an energy efficient hot gas system.
Electrical: Standard electrical connections shall be 115V, 60Hz,
single phase. A 10’ cord and plug is supplied attached to a junction
box mounted on the exterior top of the cabinet.
Doors:
Solid Sliding. Exterior and interior shall be corrosion resistant
stainless steel.
980 S. Isabella Rd.
Mt. Pleasant, Michigan 48858
Phone: 800-733-8948 or 989-773-7981
Fax: 800-669-0619
|