INSTRUCTION BOOKLET
Baby Bottle Warmer
BW-10 SERIES
For your safety and continued enjoyment of this product, always read the instruction book carefully before using.
If an extension cord is used, the marked electrical rating of the exten-
sion cord should be at least as great as the electrical rating of the ap-
pliance. The longer cord should be arranged so that it will not drape
over the countertop or tabletop, where it can be pulled on by children
or tripped over unintentionally.
5. Food Warming Basket – uses steam to heat up food quickly.
6. Simple Dial Control – easy OFF/ON operation.
7. Cord Wrap (not shown) – takes up excess cord and keeps
countertop neat.
NOTICE
8. BPA Free (not shown) – all materials that come into contact with
food are BPA free.
This appliance has a polarized plug (one prong is wider than the
other). As a safety feature, this plug will fit into a polarized outlet only
one way. If the plug does not fit fully in the outlet, reverse the plug. If
it still does not fit, contact a qualified electrician. Do not attempt to
defeat this safety feature.
1
CONTENTS
3b
Important Safeguards..........................................................................2
Features and Benefits .........................................................................3
Before First Use .................................................................................4
Operation.............................................................................................4
Bottle Warming Guide.........................................................................4
Tips and Hints .....................................................................................6
Troubleshooting...................................................................................6
Cleaning and Maintenance .................................................................6
Warranty ..............................................................................................7
2
3a
5
FEATURES AND BENEFITS
1. Bottle Basket – holds any size glass or plastic bottle.
2. Measuring Cup – stores conveniently inside unit.
6
3a. Nightlight – makes nighttime feedings a little easier.
3b. Nightlight Button – to use light independently from bottle warmer.
4
4. Adapter Ring – traps steam for faster heat-up when warming
narrow bottles.
3
2. Pour the pre-measured amount of water
from the measuring cup directly into the
warming chamber (fig. 2).
BEFORE THE FIRST USE
Carefully unpack the unit and remove any
packaging and promotional labels in or on
the bottle warmer. Rinse all accessories
thoroughly in warm soapy water.
3. Do not overfill. If too much water is used,
the bottle or jar may be heated for too
long a period and reach too high a
temperature.
3
4
OPERATION
To warm your baby’s bottle or food, please
follow the instructions and the chart below.
Note: Always make sure there is no water
in chamber from previous use. To empty
the unit of leftover water, tilt the unit onto
its side over the sink. Any extra water will
come out.
For glass bottles
1. Put the bottle basket into the bottle
warming chamber (fig. 5, 6) and turn
the bottle basket to a 45-degree angle
(basket will slide into place). In this posi-
tion the bottle basket will sit about 1 inch
above the housing.
NOTE: These instructions are to be used
as a guide only. Please note that there are
many variables, such as size of the bottle and
starting temperature of the food, which can
affect the speed at which this unit warms the
bottle or jar as well as the final temperature.
Adjustments to the instructions below may be
necessary. Always test the temperature of
food before feeding baby.
1
2
1. Remove the measuring cup from the front
of the housing (fig. 1) and fill it with water
to the appropriate fill line, according to
the chart below.
6
5
2. Put the bottle into the bottle basket
(fig. 4, 6) and turn the dial to ON position.
Blue LED indicator will turn on. The unit
will shut off automatically once bottle
warming is complete. Turn the dial to the
OFF position.
3. Let the bottle sit for 15 to 30 seconds
before removing and be extremely careful
removing the bottle from the unit. Shake
the bottle to distribute the heated con-
tents before checking the temperature.
USING THE BOTTLE
BASKET
Bottle Warming Guide
Bottle Capacity
5˚C/40ºF
20˚C/70ºF
For plastic bottles
4 oz Plastic
10ml
8ml
1. Put the bottle basket into the bottle-
warming chamber (fig. 3, 4). Line up the
bottle basket arms with the insets on the
bottle warmer housing. In this position
the basket will be even/flush with the
housing.
8.9 oz Plastic
4 oz Glass
10ml
8ml
14ml
8ml
8.9 oz Glass
14ml
8ml
Baby Food 4 oz.
Baby Food 6 oz.
12ml
8ml
12ml
8ml
4
USING THE
USING THE FOOD
WARMING BASKET
1. Remove the lid of the food jar and then
place the jar into the food warming bas-
ket. Use the handle to lower it into the
bottle warming chamber (fig. 1).
2. Turn the dial to the ON position. Blue
LED indicator light will turn on. The unit
will shut off automatically once food
warming is complete. Turn the dial to the
OFF position.
USING THE NIGHTLIGHT
1. To turn the nightlight on, press the gray
button with the word LIGHT above it
located on the top of the unit.
ADAPTER RING
1. When warming a narrow bottle, we
suggest that you use the adapter ring.
2. Light will illuminate from the measuring
cup area and from around the dial. The
nightlight will stay on until the button is
pressed again.
2. Position the adapter ring over the bottle
sitting in the bottle warming chamber
and turn the dial to the ON position. Blue
LED indicator will turn on. The unit will
shut off automatically once bottle warm-
ing is complete. Turn the dial to the OFF
position.
NOTE: If the adapter ring does not fit
loosely around the bottle, do not use.
3. Let the jar sit for 15 to 30 seconds before
removing. Use the handle of the food-
warming basket to lift the jar out of the
warming chamber (fig. 2). When you
remove the jar from the unit, the contents
of the jar will not be evenly heated. Stir
the food to distribute the heated contents
before checking the temperature.
1
2
5
CLEANING AND MAINTENANCE
Cleaning accessories and base
TIPS AND HINTS
For best results, use purified water to prevent calcium deposits in the
warming chamber. When storing food, refrigerated food should be
enjoyed within 3 days, and frozen foods should be used within 30 days
for optimum freshness.
• Clean all accessories in warm soapy water or on the top rack of the
dishwasher.
• Wipe the base clean with a damp sponge or cloth. Dry it immedi-
ately. Never submerge the base or the plug in water or other liquids.
TROUBLESHOOTING
Decalcification
Q: Why won’t steaming start when I turn the unit on?
A: Check that the plug is securely inserted into the outlet.
• Sometimes mineral deposits form inside the steam chamber and can
cause damage to the machine. To avoid buildup of these minerals,
the unit should be de-scaled once a month.
A: The warming chamber may be empty. Add water to the steam
chamber.
• To descale, pour 50 ml of white (distilled) vinegar into the steam
Q: How do I empty the unit of excess water?
chamber. Leave for at least 2 hours then empty.
A: To empty the unit of excess water, tilt the unit onto its side over the
sink and any extra water will come out.
Storage
• The Cuisinart Baby® Bottle Warmer stores neatly on the countertop,
taking a minimum of space. When it is not in use, make sure to
empty any leftover water from the unit and leave it unplugged. The
hidden cord storage underneath the base will help keep excess cord
off the countertop.
• The Cuisinart Baby® Bottle Warmer is intended for HOUSEHOLD
USE ONLY. Any service other than cleaning and normal user main-
tenance should be performed by an authorized Cuisinart Service
Representative.
Q: Why is there a white residue in the bottle warming chamber?
A: Mineral-rich water causes calcium deposits to build up in the
bottle warming chamber. The unit should be cleaned out once a
month to avoid this buildup. See decalcification section in Cleaning
and Maintenance, following. To help prevent/minimize this buildup,
fresh or purified water can be used.
Q: Why is the milk bottle/food jar too hot or too cold?
A: Because there are so many variables when warming bottles/food
jars, adjustments to the water amounts in the instruction booklet
may be necessary. If the bottle/food jar was too hot try adding less
water next time. If it was too cold try adding more water next time.
A: Make sure to shake the bottle/stir the food to distribute the heated
contents after warming before checking the temperature.
6
The retail store shall then, at its discretion, either repair the product, refer the consumer
to an independent repair facility, replace the product, or refund the purchase price less
the amount directly attributable to the consumer’s prior usage of the product. If the
above two options do not result in the appropriate relief to the consumer, the consumer
may then take the product to an independent repair facility if service or repair can be
economically accomplished. Cuisinart and not the consumer will be responsible for
the reasonable cost of such service, repair, replacement, or refund for nonconforming
products under warranty.
WARRANTY
Limited 3 Year Warranty
This warranty is available to consumers only. You are a consumer if you own a Cuisinart
Baby® Bottle Warmer that was purchased at retail for personal, family or household
use. Except as otherwise required under applicable law, this warranty is not available to
retailers or other commercial purchasers or owners.
We warrant that your Cuisinart Baby® Bottle Warmer will be free of defects in materials
and workmanship under normal home use for 3 years from the date of original purchase.
California residents may also, according to their preference, return nonconforming
products directly to Cuisinart for repair, or if necessary, replacement, by calling our
Consumer Service Center toll-free at 1-800-726-0190.
to complete your product registration. However, product registration does not eliminate
the need for the consumer to maintain the original proof of purchase in order to obtain
the warranty benefits. In the event that you do not have proof of purchase date, the
purchase date for purposes of this warranty will be the date of manufacture.
Cuisinart will be responsible for the cost of the repair, replacement, and shipping and
handling for such products under warranty.
BEFORE RETURNING YOUR CUISINART® PRODUCT
If your Cuisinart Baby® Bottle Warmer should prove to be defective within the warranty
period, we will repair it, or if we think necessary, replace it. To obtain warranty service,
simply call our toll-free number 1-800-726-0190 for additional information from our
Customer Service Representatives, or send the defective product to Customer Service
at Cuisinart, 7811 North Glen Harbor Blvd., Glendale, AZ 85307.
If you are experiencing problems with your Cuisinart product, we suggest that you call
our Cuisinart Service Center at 1-800-726-0190 before returning the product for service.
If servicing is needed, a Representative can confirm whether the product is under
warranty and direct you to the nearest service location.
Your Cuisinart Baby® Bottle Warmer has been manufactured to the strictest
specifications and has been designed for use only in 120-volt outlets and only with
authorized accessories and replacement parts. This warranty expressly excludes any
defects or damages caused by attempted use of this unit with a converter, as well as by
use with accessories, replacement parts or repair service other than those authorized
by Cuisinart. This warranty does not cover any damage caused by accident, misuse,
shipment or other than ordinary household use. This warranty excludes all incidental or
consequential damages. Some states do not allow the exclusion or limitation of these
damages, so these exclusions may not apply to you. You may also have other rights,
which vary from state to state.
To facilitate the speed and accuracy of your return, please enclose $10.00 for shipping
and handling of the product.
Please pay by check or money order (California residents need only supply proof of
purchase and should call 1-800-726-0190 for shipping instructions).
NOTE: For added protection and secure handling of any Cuisinart product that is being
returned, we recommend you use a traceable, insured delivery service. Cuisinart cannot
be held responsible for in-transit damage or for packages that are not delivered to
us. Lost and/or damaged products are not covered under warranty. Please be sure to
include your return address, daytime phone number, description of the product defect,
product model number (located on bottom of product), original date of purchase, and
any other information pertinent to the product’s return.
Important: If the nonconforming product is to be serviced by someone other than
Cuisinart’s Authorized Service Center, please remind the servicer to call our Consumer
Service Center at 1-800-726-0190 to ensure that the problem is properly diagnosed, the
product is serviced with the correct parts, and the product is still under warranty.
CALIFORNIA RESIDENTS ONLY:
California law provides that for In-Warranty Service, California residents have the option
of returning a nonconforming product (A) to the store where it was purchased or (B) to
another retail store which sells Cuisinart products of the same type.
7
Tools and
Gadgets
Baby Food Maker
& Bottle Warmer
Sterilizer
Blenders
Juicers
Cuisinart offers an extensive assortment of top quality products to make life
in the kitchen easier than ever. Try some of our other countertop appliances,
cookware, tools and gadgets.
©2012 Cuisinart
150 Milford Road
East Windsor, NJ 08520
Printed in China
12CE131414
IB-11644
Any trademarks or service marks of third parties used herein are the trademarks or service marks of their respective owners.
|