Craftsman Trimmer 82147 User Manual

BATTERY REPLACEMENT  
WARNING: Risk of Electrocution.  
Before use, always test the Detector on  
a known live circuit to verify proper  
operation  
SAFETY PRECAUTIONS  
Owners’ Manual  
1. Turn power OFF  
2. Slide the pocket clip off (as shown) to  
access batteries.  
3. Replace the four LR44 batteries. The  
negative sides of the batteries face in  
the same direction, as shown. The  
positive sides of the batteries face in the  
opposite direction.  
1. Improper use of this meter can cause  
damage, shock, injury or death. Read  
and understand this manual before  
use.  
2. Secure any covers or battery doors  
before use.  
3. Inspect the condition of the meter for  
any damage before use.  
4. Remove the batteries from the meter if  
the meter is to be stored for long  
periods.  
CURRENT DETECTION  
AC Voltage and Current  
Detector  
-
NOTE: There must be a load on the  
circuit (current flow) for the  
current detection function to  
work.  
Model 82147  
+
DESCRIPTION  
1. Current Sensor and LED  
2. Current Detector “ON” LED  
3. Current Detector Sensitivity adjustment  
4. Current/Voltage/OFF function selector  
switch  
5. Voltage Sensor and LED  
6. Voltage Detector “ON” LED  
7. Voltage Detector Sensitivity adjustment  
8. Audible beeper  
1. Slide the Function switch to the Current  
position.  
Safety  
Operation  
Español  
CAUTION: Read,  
understand and  
follow Safety Rules  
and Operating  
Instructions in this  
manual before using  
this product.  
2. The “CURRENT” LED will light. If the  
LED is dim or does not light, replace  
the batteries.  
OPERATING INSTRUCTIONS  
3. Set the Sensitivity adjustment to the  
max position  
WARNING: Risk of Electrocution.  
Before use, always test the Detector on  
a known live circuit to verify proper  
operation  
4. If detector begins to beep/flash, slowly  
turn the sensitivity down until the  
beep/flash stops.  
ONE YEAR FULL WARRANTY  
ONE YEAR FULL WARRANTY ON  
CRAFTSMAN Detector  
5. Move the detector current sensor near  
the current carrying conductor until the  
current tip flashes and beeper sounds.  
VOLTAGE DETECTION  
If this CRAFTSMAN Detector fails to  
give complete satisfaction within one  
year from the date of purchase,  
RETURN IT TO THE NEAREST  
SEARS STORE OR OTHER  
CRAFTSMAN OUTLET IN THE  
UNITED STATES, and Sears will  
replace it, free of charge.  
This warranty gives you specific legal  
rights, and you may also have other  
rights which vary from state to state.  
Sears, Roebuck and Co., Dept.  
817WA, Hoffman Estates, IL 60179  
1. Slide the Function switch to the Voltage  
position.  
6. Slowly reduce the sensitivity and  
reduce the distance between the  
sensor and conductor to zero-in and  
identify the conductor.  
SPECIFICATIONS  
2. The “VOLTAGE” LED will light. If the  
LED is dim or does not light, replace  
the batteries.  
Voltage detection 12V to 600VAC  
Current sensitivity 200mA (0.2A) AC at  
0.2”  
Audible indication Beeper (Voltage &  
Current)  
Visible indication Flashing LED (Voltage  
& Current)  
Frequency range 50 to 500Hz  
Operating Temperature 14 to 122°F (-  
10°C to 50°C)  
3. Set the Sensitivity adjustment to max.  
4. If the detector begins to beep/flash,  
slowly turn the sensitivity down until  
the beep/flash stops.  
5. Touch the detector voltage sensor to  
the hot conductor or insert into the hot  
side of the electrical outlet.  
For Customer Assistance Call 9am -  
5pm (ET)  
Monday through Friday 1-888-326-1006  
6. If AC voltage is present, the detector  
light will flash and the audible beeper  
will sound.  
Operating Humidity < 80% RH  
Altitude  
< 2000m  
Power supply  
Weight  
(4) LR44 batteries  
2.1 oz. (60g)  
7. Adjust the sensitivity as needed to  
zero-in and identify the live conductor.  
WARNING: USE EXTREME CAUTION  
IN THE USE OF THIS DEVICE.  
Improper use of this device can result  
in injury or death. Follow all  
safeguards suggested in this manual  
in addition to the normal safety  
precautions used in working with  
electrical circuits. DO NOT service  
this device if you are not qualified to  
do so.  
Dimensions  
7.6 x 1.2 x 0.9”  
(192x31x24mm)  
Category III 600V  
Indoor use  
© Sears, Roebuck and Co.,  
Hoffman Estates, IL 60179 U.S.A.  
IEC 1010  
061906  
UL LISTED  
The UL mark does not indicate that this product has  
been evaluated for the accuracy of its readings.  
 

CMA Dishmachines Dishwasher MODEL GL C User Manual
Conair Iron GS29 User Manual
Conair Styling Iron CS3CS User Manual
Crate Amplifiers Musical Instrument Amplifier E60065 User Manual
Curtis MP3 Player MP1004 User Manual
Curtis Portable DVD Player DVD1047B User Manual
Danby Microwave Oven DMW1148SS User Manual
Ducane Furnace Fits All 92 User Manual
Electro Voice Portable Speaker MTH 4A User Manual
GE VCR VGN550 User Manual