™
STREETWORKS
Type
DESCRIPTION
The Streetworks Talon is the most versatile, functionally designed,
universally adaptable outdoor luminaire available. The Talon brings
outstanding performance to walkways, parking lots, roadways, building
areas, and any security lighting application. U.L. listed and CSA certified for
wet locations. IP65 Rated.
Catalog #
Project
Date
Comments
Prepared by
SPECIFICATION FEATURES
Standard with mogul-base socket
for HPS and 100-400W MH.
Standard with medium-base socket
Construction
One-piece heavy-wall, die-cast
aluminum construction with
Mounting
Extruded 8" aluminum arm
includes internal bolt guides
allowing for easy positioning of
for 70W MH and below. All optical
integral reveal channels along top
modules feature quick disconnect
surface of housing. Internal cast-in
fixture during installation to pole
or wall surface. Standard single
carton packaging of housing,
square pole arm and round pole
adapter for contractor friendly
arrival of product on site.
wiring plugs and are field rotatable
wall separates optical and
in 90° increments.
electrical chambers allowing
components to operate cooler.
Electrical
Offered standard with ballast and
One-piece die-cast aluminum door
frame with integral cast-in gasket
related electrical componentry
channel seals optical chamber to
hard mounted to die-cast housing
Finish
an IP65 rating. Stainless steel
details for optimal heat transfer
latches and hinges allow for
Housing and arm finished in a 5
stage premium TGIC polyester
powder coat paint, 2.5 mil nominal
thickness for superior protection
against fade and wear. Standard
colors include black, bronze, grey,
white, dark platinum, and graphite
metallic.
and operating efficiency. Optional
toolless opening and removal of
galvanized steel swing-down
door frame.
power tray with integral handle.
Electrical disconnects allow tray to
be completely removed from the
Reflector
Choice of 14 high efficiency optical
housing providing ample hand and
systems utilizing horizontal and
tool room for attachment of fixture
during installation.
vertical lamp orientations. Optional
high efficiency segmented optical
systems constructed of premium
LAMP TYPE
WATTAGE
95% reflective anodized aluminum
sheet. Optical segments are rigidly
mounted inside a thick gauge
aluminum housing for superior
protection. All segment faces are
clean of rivet heads, tabs or other
means of attachment which may
cause streaking in the light
Metal Halide
175, 250, 400W
Pulse Start Metal Halide
Super Metal Halide
High Pressure Sodium
70, 100, 150, 175, 200, 250, 320, 350, 400W
175, 250, 400W
70, 100, 150, 250, 400W
TMU
TALON MEDIUM
distribution.
70-400W
High Pressure Sodium
Pulse Start Metal Halide
Super Metal Halide
Metal Halide
DIMENSIONS
8"
[203mm]
11 7/8"
[302mm]
AREA LUMINAIRE
E N E RG Y DATA
Hi-Reactance Ballast Input Watts
70W HPS HPF (95 Watts)
100W HPS HPF (130 Watts)
150W HPS HPF (190 Watts)
150W MH HPF (185 Watts)
1 3/4"
[45mm]
23 1/4" [590mm]
8"
[203mm]
CWI Ballast Input Watts
250W HPS HPF (300 Watts)
16 1/4" [412mm]
CWA Ballast Input Watts
175W MH HPF (210 Watts)
200W MP HPF (240 Watts)
250W MH HPF (295 Watts)
320W MP HPF (365 Watts)
400W MP HPF (448 Watts)
400W MH HPF (455 Watts)
400W HPS HPF (465 Watts)
DRILLING PATTERNS
TY P E “ M ”
WA L L M O U N T
2 5/16"
[59mm]
E P A
12"
[305mm]
Effective Projected Area: (Sq. Ft.)
Recessed Door w/o Arm: 0.79
Deep Door w/o Arm: 1.02
8" Arm: 0.43
3/4" [20mm]
dia. hole
2 7/16" [124mm]
4 7/8"
[124mm]
10 1/2"
[267mm]
4 7/8" [124mm]
S H I P P I N G DATA
Approximate Net Weight:
Recessed Door 47 lbs. (21.79 kgs.)
Deep Door 52 lbs. (23.63 kgs.)
(2) 5/8" [16mm]
dia. holes
6 1/2"
[165mm]
8"
9/16" [14mm]
Dia. Hole (4)
[203mm]
Specifications and Dimensions subject to change without notice.
TMU_ADH081549
08/05/2008 2:32:09 PM
Consult your representative for additional options and finishes.
TALON MEDIUM
TMU
ORDERING INFORMATION
SAMPLE NUMBER: TMU40SWW3SF
TMU
Product Family 1
TMU=Talon Site
Medium
Accessories
(order separately/replace XX with color designation)
OA/RA1016=NEMA Photocontrol (105-285V)
OA/RA1027=NEMA Photocontrol (480V)
OA/RA1201=NEMA Photocontrol (347V)
OA/RA1013=Shorting Cap
Lens Type
F=Flat Glass
S=Sag Glass
Options (add as suffix/must be
ordered in alphanumeric order)
1=Single Fuse
Voltage
2=120V
0=208V
4=240V
7=277V
8=480V
9=347V
N=Multi-Tap wired 277V
W=Multi-Tap wired 120V
V=Multi-Tap wired 240V
[120, 277 or 347V] 6
Lamp Wattage 2
70=70W
10=100W
15=150W
17=175W
Colors (add as suffix/
must specify)
WH=White
BK=Black
AP=Grey
BZ=Bronze
DP=Dark Platinum
GM=Graphite Metallic
2=Double Fuse
[208, 240 or 480V] 6
MA1010-XX=Single Tenon Adapter for 3 1/2" O.D. Tenon
MA1011-XX=2 @ 180° Tenon Adapter for 3 1/2" O.D. Tenon
MA1012-XX=3 @ 120° Tenon Adapter for 3 1/2" O.D. Tenon
MA1013-XX=4 @ 90° Tenon Adapter for 3 1/2" O.D. Tenon
MA1014-XX=2 @ 90° Tenon Adapter for 3 1/2" O.D. Tenon
MA1015-XX=2 @ 120° Tenon Adapter for 3 1/2" O.D. Tenon
MA1016-XX=3 @ 90° Tenon Adapter for 3 1/2" O.D. Tenon
MA1017-XX=Single Tenon Adapter for 2 3/8" O.D. Tenon
MA1018-XX=2 @ 180° Tenon Adapter for 2 3/8" O.D. Tenon
MA1019-XX=3 @ 120° Tenon Adapter for 2 3/8" O.D. Tenon
MA1045-XX=4 @ 90° Tenon Adapter for 2 3/8" O.D. Tenon
MA1048-XX=2 @ 90° Tenon Adapter for 2 3/8" O.D. Tenon
MA1049-XX=3 @ 90° Tenon Adapter for 2 3/8" O.D. Tenon
MA1213-XX=External House-side Shield Kit [EPA=0.38]7
3=Three Place Terminal Block
4=NEMA Twistlock Photocontrol
Receptacle
20=200W
B=Internal House-side Shield 7
DD=Deep Door
25=250W
32=320W3, 4
35=350W3, 4
DM=Direct Mount for Round or
Square Pole
Distribution
Horizontal Lamp
40=400W4
DW=Direct Wall Mount Kit
E=Quartz Restrike w/Delay
[Also Strikes at Cold Start] 8
H=Plug-in Starter Receptacle
HL=Hi/Low Dimming 9
L=Lamp Included
2F=Type II Formed
2S=Type II Segmented
3F=Type III Formed
3S=Type III Segmented
4F=Type IV Formed
4S=Type IV Segmented
5F=Type V Formed
5S=Type V Segmented
SL=Spill Light Eliminator
AF=Automotive Front
Row
24=250/400W wired 250W
42=250/400W wired 400W
Lamp Type
S=High Pressure Sodium
R=Super Metal Halide
M=Metal Halide
MS=External Mast Arm Adapter
P=Button Type Photocontrol
[120, 208, 240 or 277V] 6
Q=Quartz Restrike
P=Pulse Start Metal Halide
Ballast Type
C=CWI
[Hot Restrike Only] 8
R=Removable Power Tray
U=U.L. Listed
V=Polycarbonate Vandal Shield
WM=Wall Bracket with 8" Arm
Vertical Lamp
H=Reac./HPF
K=10KV CWA
N=Hi. Reac./NPF
P=Hi. Reac./HPF
R=Reac./NPF
W=CWA
3V=Type III Vertical 5
4V=Type IV Vertical 5
AR=Area Round 5
AS=Area Square 5
NOTES: 1 8" arm and round pole adapter included with fixture. 2 Standard with mogul-base socket for HPS and 100-400W MH. Standard with medium-base socket for 70W MH. 3 320/350W Pulse Start Metal Halide lamp
only. 4 Requires reduced envelope lamp. 5 Vertical lamp optics ship standard with deep door. Flat glass not available for 250W—400W. 6 Must specify voltage. 7 House-side shield not available on 5S, 5F, AS, AR
and SL optics. 8 Quartz options not available with SL and AF optics. 9 Requires vertical lamp orientation. Provides 24V low voltage leads used in dimming controls. 10 Specifications and dimensions subject to
change without notice.
Specifications and Dimensions subject to change without notice.
Streetworks • Customer First Center • 1121 Highway 74 South • Peachtree City, GA 30269 • TEL 770.486.4800 • FAX 770.486.4801
TMU_ADH081549
08/05/2008 2:32:09 PM
PHOTOMETRICS [Complete IES files available at www.cooperlighting.com]
Footcandle Table
Select mounting height and read across for
footcandle values of each isofootcandle line.
Distance in units of mounting height.
Mounting Footcandle Values for
Height
Isofootcandle Lines
A
B
C
D
E
A
B
C
D
A
B
C
D
A
B C
D
E
A
B
C D E
175W [3V/AS]
15'
20'
25'
1.70
1.00
0.64
0.85
0.50
0.32
0.34
0.20
0.13
0.17
0.10
0.06
--
--
--
250W [SL]/400W [3S]
20'
25'
30'
2.00
1.28
0.88
1.00
0.64
0.44
0.50
0.32
0.22
0.20
0.13
0.09
0.10
0.06
0.04
TMU17MXX3VF
175-Watt MH
TMU17MXXASF
175-Watt MH
TMU25MXXSLF
250-Watt MH
TMU40MXX3SF
400-Watt MH
14,000-Lumen Clear Lamp
Type III Vertical
Flat Glass
14,000-Lumen Clear Lamp
Area Square
Flat Glass
20,500-Lumen Clear Lamp
Spill Light Eliminator
Flat Glass
36,000-Lumen Clear Lamp
Type III Segmented
Flat Glass
Footcandle Table
Select mounting height and read across for
footcandle values of each isofootcandle line.
Distance in units of mounting height.
Mounting Footcandle Values for
Height
Isofootcandle Lines
A
B
C
D
E
A
B
C
D
E
A
B
C
D E
A
B
C D E
A
B
C
D
E
400W [3V/4V/5S/AR]
20'
3.00
1.50
0.75
0.30
0.15
25'
30'
2.00
1.38
1.00
0.69
0.50
0.34
0.20
0.13
0.10
0.06
TMU40MXX3VS
400-Watt MH
TMU40MXX4VS
400-Watt MH
TMU40MXX5SF
400-Watt MH
TMU40MXXARS
400-Watt MH
36,000-Lumen Clear Lamp
Type III Vertical
Sag Glass
36,000-Lumen Clear Lamp
Type IV Automotive Perimeter Type V Segmented
Sag Glass Flat Glass
36,000-Lumen Clear Lamp
36,000-Lumen Clear Lamp
Area Round
Sag Glass
MOUNTING CONFIGURATIONS
Wall Mount
Arm Mount Single
E.P.A.
TMU
Arm Mount 2 @ 180°
E.P.A.
TMU
Arm Mount 2 @ 90°
E.P.A.
TMU
Arm Mount 3 @ 120°
E.P.A.
TMU
Arm Mount 3 @ 90°
E.P.A.
TMU
Arm Mount 4 @ 90°
E.P.A.
TMU
Recessed Door 1.22
Recessed Door 2.44
Recessed Door 2.44
Deep Door 2.90
Recessed Door 3.23
Deep Door 3.92
Recessed Door 3.23
Recessed Door 3.63
Deep Door
1.45
Deep Door
2.90
Deep Door
3.92
Deep Door
4.43
Specifications and Dimensions subject to change without notice.
Streetworks • Customer First Center • 1121 Highway 74 South • Peachtree City, GA 30269 • TEL 770.486.4800 • FAX 770.486.4801
TMU_ADH081549
08/05/2008 2:32:09 PM
|