®
MCGRAW-EDISON
DESCRIPTION
DIMENSIONS
The McGraw-Edison PSL Parking
Structure Luminaire is a
multi-purpose parking luminaire.
The refractor provides proper 3D
illumination for parking garages
while the glare guard and light
trespass shield add extra measure
of visual comfort and control.
The PSL improves drivers vision
and pedestrian safety in parking
garage facilities.
11 7/8"
[302mm]
PSL
PARKING
STRUCTURE
LUMINAIRE
14 3/4" [375mm]
7 0 - 2 0 0 W
Metal Halide
Pulse Start Metal Halide
High Pressure Sodium
Electrodeless Fluorescent
ORDERING INFORMATION
BOROSILICATE GLASS
PARKING STRUCTURE
LUMINAIRE
SAMPLE NUMBER: PSL-175-MH-MT-WH
4
8
Product
Family
PSL=Parking
Structure
Luminaire
Lamp
Lamp Type
MH=Metal
Halide
MP=Pulse
Start
Voltage
Color
Options &
Accessories
Wattage
70=70W
85=85W
100=100W
150=150W
175=175W
200=200W
120=120V
208=208V
240=240V
277=277V
480=480V
DT=Dual-Tap
WH=White
AP=Grey
BZ=Bronze
BK=Black
• Formed aluminum flush
draw-action latches offer
easy access to lamp
compartment without
tools and maintain
integrity of seal when
closed
(See Below)
1
Metal
Halide (CWA)
3
5
2
6
HPS=High Pressure MT=Multi-Tap
7
Sodium
TT=Triple-Tap
QL=Electrodeless
1
Fluorescent
• HID—4KV pulse rated
medium-base with
nickel-plated screw shell
• HID—HPF, -20º starting
Dual-Tap standard. For
use with up to 175W Metal
Halide lamp, 150W High
Pressure Sodium or 85W
QL Induction
9
13
Options
Accessories
F=Single Fuse (120, 277 or 347V)
FF=Double Fuse (208, 240 or 480V)
EM=Quartz Restrike with Time Delay (Hot & Cold Restrike)
Q=Quartz Restrike (Hot Restrike Only)
EM/SC=Emergency Separate Circuit
CT=Conduit Tap
LAG=Less Antenna Guard
PL=Polycarbonate Lens (AccUView Inhibitor Applied)
TR=Tamper Proof
L=Lamp Included
PSL/BGL-XX=Bird Guard
PSL/GG60=Glare Guard
PSL/LTS-XX=Light Trespass Shield
PSL/TM=Trunnion Mount Kit
• Molded borosilicate glass
refractor. Glass shock-
absorbing system
10
11
consists of 16 gauge steel
ring to support the full
round lens; the lens floats
on the injection-molded
silicone gasket for
12
additional protection.
Optional polycarbonate
lens available
• Liquid injection-molded
silicone gasket provides
continuous seal between
housing and refractor
assembly
• U.L. listed and CSA
certified for wet locations
in all mounting positions;
IP65 rated
NOTES: 1 85W QL Electrodeless Fluorescent only. Available with electronic ballast only. Specify 120V for 100-120V, 277V for 200-277V. 2 Pulse Start Metal Halide only.
3 175W and 200W only. 4 Product also available in non-US voltages and 50Hz for international markets. Consult factory for availability and ordering
information. 5 Dual-Tap ballast is 120/277V wired 277V. 6 Multi-Tap ballast is 120/208/240/277V wired 277V. 7 Triple-Tap ballast is 120/277/347V wired 347V.
8 Other finish colors available, including a full line of RAL color matches. Consult your Cooper Lighting Representative. 9 Add as suffix in the order shown.
10 Removes standard cast aluminum protective cage assembly. 11 Maximum use of (2) GG60's or (2) LTS accessories when used with wattages in excess of
100W. 12 Lamp is shipped separate from luminaire. Lamp is Cooper designated product based on luminaire requirements. Specified lamps must be ordered
• Approximate net weight:
34 lbs. (15 kgs.)
as a separate line item. 13 Order separately, replace XX with color suffix. 14 Specifications and dimensions subject to change without notice.
1200 COOPER LIGHTING
|