Conair Skin Care Product Facial Steamer User Manual

near children or by individuals with certain  
disabilities.  
3. Use this appliance only for its intended  
purpose as described in the manual. Do  
not use attachments not recommended by  
the manufacturer.  
4. Never operate this appliance if it has a  
damaged cord or plug, if it is not working  
properly, or if it has been dropped, damaged,  
or dropped into water. Return the appliance to  
a service center for examination and repair.  
5. Keep the cord away from heated surfaces.  
Do not wrap the cord around the appliance.  
6. To avoid burning, do not pick up the unit  
while water is hot since water can spill out.  
7. Never block the air openings of the  
appliance or place it on a soft surface, such  
as a bed or couch, where the air openings  
may be blocked. Keep the air openings free  
of lint, hair, and other debris.  
8. Never use while sleeping.  
9. Never drop or insert any object into any  
opening or hose.  
10. Do not use outdoors or operate where  
aerosol (spray) products are being used or  
where oxygen is being administered.  
11. Do not use an extension cord with  
this appliance.  
12. Unplug this appliance before filling. Fill  
reservoir with tap water only. Do not overfill.  
13. Use The Microdermabrasion Facial Spa  
only on a level surface.  
14. Do not use additives.  
15. Never place face close to facial steamer  
in one position as this may cause scalding.  
16. To avoid burning, do not touch after  
plugging in water reservoir unit.  
17. Do not mix old and new batteries. Do  
not mix alkaline, standard (carbon-zinc), or  
rechargeable (nickel cadmium) batteries.  
18. Do not use the spa without the mask.  
19. Do not place hand in the base.  
20. Do not touch steam as it comes out of  
the base.  
21. Do not move or pick up the unit until the  
water cools.  
This product should not be used in the  
following cases:  
• Place facial mask or  
sinus cone over unit. Lock  
by aligning bumps on  
facial mask with slots  
over water reservoir and  
turn clockwise. (See  
Figure 2)  
mist begins deep cleansing action.  
IMPORTANT SAFETY  
INSTRUCTIONS  
• Remove your face occasionally and blot  
with a cool, damp towel. Steam for a  
minimum of 5 minutes, but no longer than  
30 minutes.  
Tuberculosis, benign and malignant tumors,  
inflammations of the skin, phlebitis and  
thrombosis, open and fresh wounds, bruises,  
broken skin or varicose veins.  
When using electrical appliances, especially  
when children are present, basic safety  
precautions should always be followed,  
including the following:  
• Immediately after steaming, rinse your  
face with cool water.  
Figure 2  
INSTRUCTIONS FOR USING  
YOUR MICRODERMABRASION  
SPA  
Before beginning, cleanse your face, following  
your daily care routine. Lightly pat your  
favorite moisturizer or eye cream around the  
eye area.  
• Press “ON/OFF” button to turn unit on.  
INSTRUCTIONS FOR USING  
YOUR MICRODERMABRASION  
TOOL  
• When the power is on, the ready indicator  
light will flash for 3 minutes as the water is  
preheating.  
READ ALL  
SAVE THESE  
INSTRUCTIONS  
• When the indicator light has stopped  
flashing and is steady, you may use the  
Facial Spa. Unit will automatically shut off  
after 45 minutes.  
• Snap the exfoliating brush attachment  
onto the unit, making sure it is securely  
attached.  
BEFORE USING  
INSTRUCTIONS  
KEEP AWAY FROM WATER  
USING YOUR FACIAL  
STEAMING UNIT  
• Your Facial Spa includes two detachable  
cones:  
• Apply a generous amount of your favorite  
exfoliating cream to your face.  
• At the speed of your choice, massage the  
cleanser on your face in a circular motion,  
making sure not to exceed two minutes.  
OPERATING  
• FOR A TIMED TREATMENT, the timer  
control can be set from 3 to 15 minutes by  
rotating the knob to desired time.  
DANGER –  
INSTRUCTIONS  
To reduce the risk of electrocution:  
• Press the timer start button and the timer  
indicator light will go on.  
This appliance has a polarized plug (one  
blade is wider than the other). As a safety  
feature, this plug will fit in a polarized outlet  
only one way. If the plug does not fit fully in  
the outlet, reverse plug. If it still does not fit,  
contact a qualified electrician. Do not attempt  
to defeat this safety feature.  
1. Always unplug this appliance immediately  
after using.  
• Use for 10 second intervals per area  
beginning with the forehead; avoiding the  
eye area, move downwards toward the  
cheek and nose area then to your chin area.  
This step exfoliates, thoroughly cleans and  
removes dulled skin cells. Rinse face and  
pat dry. Next apply cool water or your  
favorite astringent to close pores and seal  
in moisture.  
• Now you are ready to apply your favorite  
moisturizing lotion by using the sponge  
applicator. Dot your forehead, cheeks, nose  
and chin with a generous amount of mois-  
turizer and smooth the cream into your  
skin. Apply light to medium pressure and  
use upward, circular strokes. After just one  
personal facial with the Microdermabrasion  
Facial Spa you’ll find your skin looking  
fresher and healthier.  
1. Facial Mask: Use for facial cleaning.  
• The unit will shut off and a buzzer will  
sound to indicate that preset time has expired.  
2. Sinus Cone: Use for concentrated  
steam to assist in respiratory therapy.  
Place your nose in the sinus cone with  
forehead touching curved rim. Relax as  
soothing mist promotes easier breathing,  
however, do not use as room humidifier.  
2. Do not use while bathing.  
3. Do not place or store appliance where it  
can fall or be pulled into a tub or sink.  
NOTE: One fill provides between 10-30  
minutes of soothing mist. If the facial spa  
should run out of water, shut off  
4. Do not place in or drop into water or  
other liquid.  
• The Microdermabrasion unit operates on 2  
“AA” batteries. For battery  
insertion, gently pull down  
lower cap and insert  
immediately, then begin your facial again.  
• Clean your face and neck  
• Turn facial mask or sinus cone counter-  
clockwise and lift away  
from base.  
5. Do not reach for an appliance that has  
fallen into water or other liquid. Unplug  
immediately.  
• Allow approximately 3 to 4 minutes for  
steam mist to develop, then place your face  
gently against the rim of the facial mask or  
sinus cone. To avoid burning, do not pick  
up the unit while water is hot since water  
will spill out.  
batteries.  
• Fill the water cylinder  
with warm tap water. Pour  
water into the reservoir  
and plug it into a 120 volt  
AC household outlet. (See  
If you have any skin  
WARNING To reduce the  
risk of burns, electrocution, fire, or injury to  
persons:  
condition, sensitivity to  
heat, or other health issues  
or questions, including those relating to use  
of this product while undergoing any  
treatments or taking any medications, please  
consult with a physician before use.  
• If more steam is desired, place a towel  
over your head that so it covers the mask  
and sides of the steamer.  
Figure 1  
1. An appliance should never be left unattended  
when plugged in.  
2. This product is not to be used by, on, or  
Figure 1)  
• Close your eyes and relax as the soothing  
 

Compaq Personal Computer 470004 759 User Manual
Cooper Lighting Stud Sensor CPD 1200H User Manual
Creative Speaker SB1380 User Manual
Electro Voice Stereo Receiver NetMax N8000 User Manual
EVGA Computer Hardware 780I SLI User Manual
Extron electronic Stereo System 26 018 02 User Manual
Fender Musical Instrument Amplifier P N 047538 User Manual
Fisher Price Motorized Toy Car T1961 User Manual
Fisher Price Video Games T6356 User Manual
Fundex Games Games 2633 User Manual