Coleman Indoor Fireplace 5064 722 User Manual

FOLLOW INSTRUCTIONS AND WARNINGS TO AVOID FIRE,  
SERIOUS INJURY OR DEATH.  
®
Assembly and Instruction Sheet  
for 40” Round Fireplace  
Models: 5064-722; 5064-727; 5064-747  
WARNING  
• Outdoor use only. Never use in enclosed area. Use in unventilated areas  
will endanger your life.  
• Keep away from all combustible materials including gasoline and other  
flammable liquids and vapors.  
• Use on a level, noncombustible surface only. Keep away from house,  
garage, balconies, or eave overhangs.  
• Keep out of the reach of children.  
• Be sure screen is in place while in use and do not use in windy conditions.  
• Do not overfill firebowl or use to burn leaves and trash.  
• Exercise the same care you would with an open fire.  
• Never leave unit unattended when hot or in use.  
• Completely extinguish fire before leaving.  
• Use gloves when handling or moving. Ashes can remain warm for a long  
time after extinguishing.  
• Dispose of cold ashes properly.  
• Do not modify in any way nor use with parts not expressly approved by  
Coleman.  
• Combustion by-products produced when using this product contain  
chemicals known to the State of California to cause cancer, birth defects,  
Follow these instructions for assembly and read carefully, particularly the  
safety statements. The safety alert symbol,  
is a universally recognized  
symbol used to identify safety information about hazards that can result in  
personal injury. When this symbol is used you should pay very close  
attention to what is written. Review these instructions before beginning  
assembly or using your fireplace.  
or other reproductive harm.  
Contact local authorities regarding possible burn restrictions before using product.  
Fireplace Parts Check List  
Assembly (cont.)  
• Check package for all parts needed for assembly.  
3. Place Firebowl Support Ring on top of Leg Brackets as shown. Carefully  
align holes as shown. Make sure Rectangle Bolt Plate is on bottom of  
Firebowl Support Ring.  
6. Hardware Kit w/Handle  
7. Firebowl Support Ring  
8. Grate  
1. Protective Cover  
2. Table Inserts  
3. Leg Brackets  
4. Screen Lifting Tool  
5. Leg Support Ring  
9. Screen Assembly  
Firebowl Support Ring  
10. Firebowl  
3
4
5
2
1
6
7
Align holes  
Leg Bracket  
8
4. Insert long bolts and secure with nuts. Tighten all bolts in Leg Support  
Ring and Firebowl Support Ring.  
10  
9
• Check all items for shipping damage. Call Coleman at 1-800-835-3278 or  
TDD: 316-832-8707 if you have any problems.  
Assembly  
1. Carefully unpack all parts from shipping box.  
Horizontal  
Rectangle  
Support  
bolt plate  
2. Align holes in Leg Bracket and assemble to Leg Support Ring as  
5. Assemble four table inserts. Make certain that the  
ends of the inserts rest on the Horizontal Supports.  
shown. Attach with small bolt. Hand tighten.  
Leg  
Bracket  
Leg Support  
Ring  
(continued on other side)  
 

Cobra Electronics Marine GPS System MC 600CI User Manual
Conair Electric Shaver HGL1 User Manual
Craftsman Portable Multimedia Player 32061199 User Manual
Crate Amplifiers Stereo Amplifier G120C User Manual
Crown Audio Microphone MB 4E User Manual
Curtis CD Player RCD122UK User Manual
Extron electronic Stereo Receiver HDMI 201 Rx User Manual
Fisher Paykel Ventilation Hood HT90DBX1 User Manual
GBC Paper Shredder GDHS7 User Manual
GE Oven JKP75SM User Manual