|
JPOS Thermal Receipt Printer Driver Installation
and User Guide
Foreword
The purpose of this manual is to explain how to install and use JPOS Thermal Receipt
Printer driver. This driver supports windows 98/2000/XP and Linux.
About the Product
This is JPOS Thermal Receipt Printer driver from CBM Corporation. This printer driver
can work with all the major platforms such as window 98/2000/XP, Linux etc. This printer driver
supports receipt printing only.
This printer driver has support for CBM Corporation’s Receipt Thermal Printers and Cash Drawers
as listed below
•
•
CBM-S300
CBM-1000II
Logical Name of the POS Devices (Name to be used in the test application)
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
CBM S300 Parallel Windows
CBM S300 Cash Drawer 1 Parallel Windows
CBM S300 Cash Drawer 2 Parallel Windows
CBM S300 Serial Windows
CBM S300 Cash Drawer 1 Serial Windows
CBM S300 Cash Drawer 2 Serial Windows
CBM 1000II Parallel Windows
CBM 1000II Cash Drawer 1 Parallel Windows
CBM 1000II Cash Drawer 2 Parallel Windows
CBM 1000II Serial Windows
CBM 1000II Cash Drawer 1 Serial Windows
CBM 1000II Cash Drawer 2 Serial Windows
CBM S300 Parallel Linux
CBM S300 Cash Drawer 1 Parallel Linux
CBM S300 Cash Drawer 2 Parallel Linux
CBM S300 Serial Linux
CBM S300 Cash Drawer 1 Serial Linux
CBM S300 Cash Drawer 2 Serial Linux
CBM 1000II Parallel Linux
CBM 1000II Cash Drawer 1 Parallel Linux
CBM 1000II Cash Drawer 2 Parallel Linux
CBM 1000II Serial Linux
CBM 1000II Cash Drawer 1 Serial Linux
CBM 1000II Cash Drawer 2 Serial Linux
For windows platform:
The current version of JPOS Thermal Receipt Printer driver supports
parallel communication (LPT Port) and Serial communication (COM port)
and USB.
For Linux platform:
The current version of JPOS Thermal Receipt Printer driver supports
parallel communication (LPT Port) and Serial communication (COM port)
and USB.
Software Requirements
The software interface shall follow the current standard for controlling and
operating the Thermal Receipt Printers under the OS.
Installation Steps for Windows
To install JPOS printer driver on windows environment
•
Double click on the “setup.exe” supplied with in this installation version and
follow instructions during the execution of “setup.exe”.
Installation Steps for Linux
To install JPOS printer driver on Linux environment type following command on
the command prompt
java –jar Setup.jar
And follow instructions during the execution “Setup.jar”.
Copy librxtxParallel-2.0.5.so, librxtxSerial.so, librxtxSerial-2.0.5.so,
librxtxParallel.so and libJavaxUsb.so to JRE installation dir path ./lib/i386 for
serial, parallel and usb communication on linux.
How to use the Driver for windows
•
Start the POS printer test Application by double clicking on
“Application.jar” file.
•
Start the JPOS Entry editor by double clicking on “jcl.jar” file. Details
on how to use JPOS Entry Editor are given in “How to use the JPOS Entry
editor.doc”.
How to use the Driver for linux
Open the command prompt and change to the linux installation directory and type
the following command on the command prompt:
For starting the application
java –jar Application.jar
for starting the JPOS entry editor
java –jar jcl.jar
Details on how to use JPOS Entry Editor are given in “How to use the JPOS
Entry editor.doc”.
The JPOS Thermal Receipt Printer driver supports the following capabilities:
1. Character Set selection
2. Bold
3. Font type face list selection
4. Receipt paper cut
5. Feed Lines to paper cut
6. Left 90 degree rotation
7. Right 90 degree rotation
8. 180 degree rotation
9. Underline
10. Alignment
11. Horizontal and Vertical Scaling
12. Bit map printing
13. Bar code printing
14. Map mode printing
The JPOS Thermal Receipt Printer driver supports the following methods:
1. Cut paper
2. Print Immediate
3. Print Normal
4. Rotate Print
5. Transaction Print
6. Set Bitmap
7. Print Bitmap
8. Print Barcode
9. Map Mode
|