Bose MP3 Docking Station SoundDock Series III User Manual

SOUNDDOCK® SERIES III  
DIGITAL MUSIC SYSTEM  
Owners Guide | Brugervejledning | Bedienungsanleitung | Guía de usuario | Notice d’utilisation  
Manuale di istruzioni | Gebruiksaanwijzing | Bruksanvisningen  
 
TAB 8  
TAB 7  
TAB 6  
TAB 5  
TAB 4  
TAB 3  
TAB 2  
English  
IMPORTANT SAFETY INSTRUCTIONS  
WARNINGS and CAUTIONS  
Please read this owner’s guide  
Please take the time to carefully follow the instructions in this owner’s guide.  
It will help you set up and operate your system properly and enjoy all of its  
advanced features. Please save this owner’s guide for future reference.  
Keep the remote control battery away from children. It may cause a fire or  
chemical burn if mishandled. Do not recharge, disassemble, heat above 100º C  
(212º F), or incinerate. Dispose of used batteries promptly. Replace only with a  
battery of the correct type and model number.  
Danger of explosion if battery is incorrectly replaced. Replace only with Duracell,  
Eveready, Energizer, Maxell, Toshiba, Sanyo, CR2032 or DL2032 3-volt  
lithium battery.  
WARNING: To reduce the risk of fire or electrical shock, do not expose the  
product to rain or moisture.  
WARNING: Do not expose the apparatus to dripping or splashing, and do  
not place objects filled with liquids, such as vases, on or near the apparatus.  
As with any electronic product, use care not to spill liquids into any part of the  
system. Liquids can cause a failure and/or a fire hazard.  
Make no modifications to the system or accessories. Unauthorized alterations  
may compromise safety, regulatory compliance, and system performance.  
Do not place any naked flame sources, such as lighted candles, on or near  
the apparatus.  
NOTE: The product label is located on the bottom of the product.  
NOTE: This product must be used indoors. It is neither designed nor tested for  
use outdoors, in recreation vehicles, or on boats.  
NOTE: This product is intended to be used only with the power supply provided.  
NOTE: Where the mains plug or appliance coupler is used as the disconnect  
device, such disconnect device shall remain readily operable.  
Please dispose of used batteries properly, following any  
local regulations. Do not incinerate.  
The lightning flash with arrowhead symbol, within an equilateral  
triangle, alerts the user to the presence of uninsulated dangerous  
voltage within the system enclosure that may be of sufficient magnitude  
to constitute a risk of electric shock.  
This product conforms to all applicable EU directive requirements.The  
compliance.  
The exclamation point within an equilateral triangle alerts the user to the  
presence of important operating and maintenance instructions in this  
owner’s guide.  
ii  
 
English  
TAB 2  
TAB 3  
TAB 4  
TAB 5  
TAB 6  
TAB 7  
TAB 8  
IMPORTANT SAFETY INSTRUCTIONS  
1. Read these instructions – for all components before using this product.  
2. Keep these instructions – for future reference.  
3. Heed all warnings – on the product and in the owner’s guide.  
4. Follow all instructions.  
13. To prevent risk of fire or electric shock, avoid overloading wall outlets,  
extension cords, or integral convenience receptacles.  
14. Do not let objects or liquids enter the product – as they may touch  
dangerous voltage points or short-out parts that could result in a fire or  
electric shock.  
15. See product enclosure for safety related markings.  
5. Do not use this apparatus near water or moisture – Do not use this  
product near a bathtub, washbowl, kitchen sink, laundry tub, in a wet  
basement, near a swimming pool, or anywhere else that water or moisture  
are present.  
16. Use proper power sources – Plug the product into a proper power source,  
as described in the operating instructions or as marked on the product.  
6. Clean only with a dry cloth – and as directed by Bose Corporation.  
Information about products that generate  
electrical noise  
Unplug this product from the wall outlet before cleaning.  
7. Do not block any ventilation openings. Install in accordance with the  
manufacturer’s instructions – To ensure reliable operation of the product  
and to protect it from overheating, put the product in a position and loca-  
tion that will not interfere with its proper ventilation. For example, do not  
place the product on a bed, sofa, or similar surface that may block the  
ventilation openings. Do not put it in a built-in system, such as a bookcase  
or a cabinet that may keep air from flowing through its ventilation openings.  
In the USA:  
This equipment has been tested and found to comply with the limits for a Class  
B digital device, pursuant to Part 15 ofthe FCC rules. These limits are designed  
to provide reasonable protection against harmful interference in a residential  
installation. This equipment generates, uses, and can radiate radio frequency  
energy and, if not installed and used in accordance with the instructions, may  
cause harmful interference to radio communications. However, this is no  
guarantee that interference will not occur in a particular installation. If this  
equipment does cause harmful interference to radio or television reception,  
which can be determined by turning the equipment off and on, you are  
encouraged to try to correct the interference by one or more of the following  
measures:  
8. Do not install near any heat sources, such as radiators, heat registers,  
stoves or other apparatus (including amplifiers) that produce heat.  
9. Protect the power cord from being walked on or pinched, particularly  
at plugs, convenience receptacles, and the point where they exit from  
the apparatus.  
10. Only use attachments/accessories specified by the manufacturer.  
• Reorient or relocate the antenna in the device receiving the interference.  
• Increase the separation between the equipment and receiver.  
11. Unplug this apparatus during lightning storms or when unused for long  
periods of time – to prevent damage to this product.  
• Connect the equipment to an outlet on a different circuit than the one to  
which the receiver is connected.  
12. Refer all servicing to qualified service personnel. Servicing is required  
when the apparatus has been damaged in any way: such as power  
supply cord or plug is damaged; liquid has been spilled or objects have  
fallen into the apparatus; the apparatus has been exposed to rain or  
moisture, does not operate normally, or has been dropped – Do not  
attempt to service this product yourself. Opening or removing covers may  
expose you to dangerous voltages or other hazards. Please call Bose to be  
referred to an authorized service center near you.  
• Consult the dealer or an experienced radio/TV technician for help.  
In Canada:  
This product complies with CAN ICES-3 (B) /NMB-3 (B).  
FCC Warning  
Changes or modifications not expressly approved by Bose Corporation could  
void the user's authority to operate this equipment.  
iii  
 
TAB 8  
TAB 7  
TAB 6  
TAB 5  
TAB 4  
TAB 3  
TAB 2  
English  
SOUNDDOCK® SERIES III DIGITAL MUSIC SYSTEM  
1. Place the system on a firm and level surface.  
Thank you for your purchase  
Congratulations on your choice of the SoundDock® Series III  
digital music system from Bose.  
Designed specifically to work with iPod and iPhone models  
with a Lightning connector, this system provides  
high-quality audio performance that invites your music to  
come out and play. You’ll find that it attracts a wide audience  
of people who love the sound.  
2. Plug the power pack into the DC POWER connector on  
the rear of the system.  
3. Plug the small end of the power cord into the connector  
on the power pack.  
4. Plug the other end of this cord into a wall outlet. You will  
hear a short tone indicating a power connection has been  
made.  
Unpacking and setting up  
Check the carton for all of the parts shown. Save the carton  
for possible future use. It provides the best means to repack  
the system for transporting it outside your residence.  
Remote control  
DC POWER  
Power pack  
Power  
cord  
Power  
pack  
SoundDock Series III  
digital music system  
Power cord  
2
 
English  
TAB 2  
TAB 3  
TAB 4  
TAB 5  
TAB 6  
TAB 7  
TAB 8  
SOUNDDOCK® SERIES III DIGITAL MUSIC SYSTEM  
Playing your iPod or iPhone  
Using the remote  
Touch any button (except Off) to turn on the SoundDock III  
system.  
1. Line up the connector on the iPod or iPhone with the  
connector on the dock. Firmly insert the iPod or iPhone  
into the dock.  
Off  
Play/Pause  
Turns off both your  
iPod or iPhone and  
the system.  
• Halts and resumes  
The iPod or iPhone will charge while docked.  
play.  
Note: If your iPod or iPhone has a case, you may need to  
remove the case in order to properly dock the iPod or iPhone.  
• Press  
and hold  
play another  
connected device  
while your iPod or  
iPhone charges.  
Volume  
Press and hold to  
change the volume  
quickly.  
Playlist select  
• Moves to the next  
or previous playlist.  
Skip/scan back  
Skip/scan forward  
• Press once to skip  
to the beginning of  
the current track.  
• Press twice to skip  
to the beginning of  
the previous track.  
• Press and hold to  
scan backward  
• Press once toskip to  
the next track.  
• Press and hold  
to scan forward  
quickly.  
2. Press the Play/Pause button on the SoundDockIII system  
remote. The remote controls system functions and basic  
iPod or iPhone functions.  
quickly.  
Note: Be sure the music application on your iPod or iPhone is  
open and ready to play.  
3. Adjust the volume using the SoundDock III remote or the  
volume controls on the iPod or iPhone.  
3
 
TAB 8  
TAB 7  
TAB 6  
TAB 5  
TAB 4  
TAB 3  
TAB 2  
English  
SOUNDDOCK® SERIES III DIGITAL MUSIC SYSTEM  
Using another audio device  
Maintaining the system  
You can play another audio device by connecting it to the  
system. This requires a cable with a 3.5mm mini plug at one  
end (not provided).  
Changing the remote control battery is the only regular  
maintenance that is required. You may also clean the system.  
Replacing the remote battery  
When the remote stops operating or its range seems  
reduced, it is time to change the remote battery.  
1. Set the audio device to slightly below full volume, then  
plug it into the AUDIO INPUT connector.  
1. Using a coin, turn the battery cover  
slightly counterclockwise.  
2. Remove the cover and insert the  
new battery (CR2032 or DL2032)  
flat side up, with the + symbol in  
view.  
3. Reseat the cover and turn it  
clockwise to lock into place.  
2. If your iPod or iPhone is in thesystem dock and charging,  
press and hold the Play/Pause button for three seconds to  
switch to the other device.  
3. Adjust the volume using the SoundDockIII system remote  
or the volume controls on the device.  
Other buttons on the remote do not control this other  
device. To return to listening to your iPod or iPhone, press  
the Play/Pause button once.  
4
 
English  
TAB 2  
TAB 3  
TAB 4  
TAB 5  
TAB 6  
TAB 7  
TAB 8  
SOUNDDOCK® SERIES III DIGITAL MUSIC SYSTEM  
WARNINGS:  
• Keep the remote control battery away from children. It may  
cause a fire or chemical burn if mishandled. Do not recharge,  
disassemble, heat above 100°C (212°F), or incinerate.  
• Dispose of used batteries promptly. Replace only with a  
battery of the correct type and model number.  
• Danger of explosion if battery is incorrectly replaced.  
Replace only with Duracell, Eveready, Energizer, Maxell,  
Toshiba, Sanyo, CR2032 or DL2032 3-volt lithium.  
Cleaning the system  
Wipe the system using a soft, dry cloth. You can also lightly  
vacuum the grille.  
• Do not use solvents, chemicals, or sprays.  
• Do not allow liquids to spill or objects to drop into any  
openings.  
5
 
TAB 8  
TAB 7  
TAB 6  
TAB 5  
TAB 4  
TAB 3  
TAB 2  
English  
SOUNDDOCK® SERIES III DIGITAL MUSIC SYSTEM  
Troubleshooting  
Problem  
What to do  
Your iPod or iPhone does not • Remove your iPod or iPhone from the dock and check for obstructions on the connectors. Wait five  
seconds, then line up the connector on the iPod or iPhone with the connector on the dock and firmly reseat  
the iPod or iPhone. You may need to do this a few times.  
dock properly  
• If your iPod or iPhone has a case, you may need to remove the case in order to properly dock the iPod or  
iPhone.  
No sound  
• Increase the volume setting for the system, using the SoundDock III system remote.  
• Increase the volume on the iPod or iPhone or your second audio device, if it is playing.  
• Make sure the system is plugged in, your iPod or iPhone or other audio device is turned on, and audio is  
playing.  
• Press the Play/Pause button on the remote control. Press and hold this button to hear a second device while  
the iPod or iPhone is charging.  
• Unplug the power cord for one minute, then plug it back in. This resets the system (you should hear a tone  
when the system is powered back on).  
• Make sure you have the latest version of software on your iPod or iPhone.  
Your iPod or iPhone does not • Make sure the Playlist mode is selected on your iPod or iPhone.  
navigate playlists as expected  
when using the remote  
6
 
English  
TAB 2  
TAB 3  
TAB 4  
TAB 5  
TAB 6  
TAB 7  
TAB 8  
SOUNDDOCK® SERIES III DIGITAL MUSIC SYSTEM  
Problem  
What to do  
Your iPod or iPhone does not • Remove your iPod or iPhone from the dock, wait five seconds, then firmly reseat the iPod or iPhone.  
respond to the SoundDock®  
remote control buttons  
shown:  
Try the remote from a different location. If it works there, check for interference from bright room lights or  
sunlight. Wipe off the small lens on the front end of the remote with a clean, dry cloth.  
• Make sure there is a clear pathway between the remote lens and your SoundDocksystem.  
• Remove and reinsert the battery as shown on page 4.  
• Replace the remote control battery as shown on page 4.  
Your SoundDockdoes not  
respond to any controls  
• Unplug the power cord for one minute, then plug it back in. This resets the system (you should hear a tone  
when the system is powered back on).  
• Contact your local Bose® dealer about the problem.  
Your iPod or iPhone does not • Remove your iPod or iPhone from the dock and check for any connection obstructions. Reseat the iPod or  
iPhone firmly.  
charge  
• If your iPod or iPhone has a case, you may need to remove the case in order to properly dock the iPod or  
iPhone.  
• Make sure your iPod or iPhone is a compatible model (see page 9).  
7
 
TAB 8  
TAB 7  
TAB 6  
TAB 5  
TAB 4  
TAB 3  
TAB 2  
English  
SOUNDDOCK® SERIES III DIGITAL MUSIC SYSTEM  
Warranty  
Customer Service  
Your B ose® SoundDock Series III digital music system is  
covered by a limited warranty. Details of the limited  
warranty are provided on the product registration card that is  
included in the carton. Please refer to the card for instructions  
on how to register. Failure to do so will not affect your limited  
warranty rights.  
For questions about the SoundDock Series III digital music  
system, contact your local Bose® dealer. To contact Bose  
directly, see the address list included in the carton.  
Technical Information  
What you must do to obtain Limited Warranty Service:  
Power rating  
1. Return product, with proof of purchase from an authorized  
100-240V  
50-60Hz, 1.5A, 81-100VA  
Bose dealer, using the following procedures:  
System size and weight  
6.65"H x 11.91"W x 6.48"D (16.89 cm x 30.26 cm x 16.47 cm)  
2. Contact the Bose organization in your country/region  
(visit Global.Bose.com/register for Bose contact  
information in your country/region) for specific return  
and shipping instructions;  
4.6 lb (2.1 kg)  
3. Label and ship theproduct, freight prepaid, to the address  
provided by the Bose organization in your country;  
and place any necessary return authorization number  
prominently on the outside of the carton. Cartons not  
bearing a return authorization number, where required,  
will be refused.  
8
 
English  
TAB 2  
TAB 3  
TAB 4  
TAB 5  
TAB 6  
TAB 7  
TAB 8  
SOUNDDOCK® SERIES III DIGITAL MUSIC SYSTEM  
Made for:  
• iPod touch (5th generation)  
• iPod nano (7th generation)  
• iPhone 5  
SoundDock and the SoundDock system design are registered trademarks of  
Bose Corporation in the U.S. and other countries.  
iPhone, iPod, iPod nano, and iPod touch are trademarks of Apple Inc.,  
registered in the U.S. and other countries, and Lightning is a trademark of  
Apple Inc.  
“Made for iPod” and “Made for iPhone” mean that an electronic accessory has  
been designed to connect specifically to iPod or iPhone, respectively, and has  
been certified by the developer to meet Apple performance standards. Apple is  
not responsible for the operation of this device or its compliance with safety  
and regulatory standards. Please note that the use of this accessory with iPod  
or iPhone may affect wireless performance.  
9
 
©2013 Bose Corporation, The Mountain,  
Framingham, MA 01701-9168 USA  
AM362678 Rev.00  
 

Billy Goat Vacuum Cleaner HTR1602V User Manual
Black Box Switch DT Pro II User Manual
Breville Convection Oven BOV500 User Manual
Briggs Stratton Snowshoes 222400 User Manual
Bush Hog Brush Cutter 320 Series User Manual
Bush Hog Cultivator PT5 User Manual
Campbell Hausfeld Pressure Washer IN470200AV User Manual
Canon Oven PIXMA MP560 User Manual
Casio Digital Camera EX ZR10 User Manual
Chief Manufacturing Indoor Furnishings RMF User Manual