Bosch Appliances Home Security System WZ16 User Manual

Integrated IR Bullet Camera  
WZ16  
en Installation Manual  
 
WZ16 Integrated IR Bullet Camera  
Table of Contents | en  
3
Table of Contents  
1
Safety  
Safety Precautions  
Important Safety Instructions  
Important Notices  
FCC & ICES compliance  
CSA certification  
4
4
4
5
7
8
8
1.1  
1.2  
1.3  
1.4  
1.5  
1.6  
Warranty / Limitation of Liability  
2
Introduction  
10  
2.1  
Parts Included  
10  
3
Installation and Connection  
11  
4
Configuration  
Adjusting the Zoom  
Adjusting the Focus  
Adjusting the Video Output Brightness  
13  
13  
13  
13  
4.1  
4.2  
4.3  
5
Troubleshooting  
14  
5.1  
5.1 Troubleshooting Tips 14  
14  
6
Technical Specifications  
15  
Installation Manual  
| 1.0 | 2010.12  
DBoowschnSleocuaridty Sfyrsotemms,WInc.ww.Somanuals.com. All Manuals Search And Download.  
4
en | Safety  
WZ16 Integrated IR Bullet Camera  
1
Safety  
1.1  
Safety Precautions  
DANGER!  
High risk: This symbol indicates an imminentlyhazardous situation such as “Dangerous  
Voltage” inside the product.  
If not avoided, this will result in an electrical shock, serious bodily injury, or death.  
WARNING!  
Medium risk: Indicates a potentially hazardous situation.  
If not avoided, this could result in minor or moderate bodily injury.  
CAUTION!  
Low risk: Indicates a potentially hazardous situation.  
If not avoided, this could result in property damage or risk of damage to the unit.  
1.2  
Important Safety Instructions  
Read, follow, and retain all of the following safety instructions. Heed all warnings on the  
unit and in the operating instructions before operating the unit.  
1. Read these instructions.  
2. Keep this instruction.  
3. Heed all warnings.  
4. Follow all instructions.  
5. Do not use this apparatus near water.  
6. Clean only with a clean, soft, dry or moistened cloth and mild detergent solution.  
7. Do not block any ventilation openings. Install in accordance with manufacturer’s  
instructions.  
8. Do not install near any heat sources such as radiators, heat registers, stoves or  
other apparatus (including amplifiers) that produce heat.  
9. Do not put objects inside the camera. Make sure that no metal objects or  
flammable substances enter the camera. This may cause fire, short-circuits and other  
damages.  
10. Be careful when handling the camera. To prevent damage, do not drop the camera  
or subject it to strong shock or vibration.  
11. Do not defeat the safety purpose of the polarized or grounding-type plug. A  
polarized plug has two blades with one wider than the other. A grounding type plug has  
two blades and a third grounding prong. The wide blade or the third prong is provided  
for your safety. If the provided plug does not fit into your outlet, consult an electrician  
for replacement of the obsolete outlet.  
12. Protect the power cord from being walked on or pinched particularly at plugs,  
convenience receptacles, and the power where they exit from the apparatus.  
13. Protect the camera from humidity and dust.  
14. Unplug this apparatus during lightning storms or when unused for long periods of  
time.  
15. Use only attachments/accessories specified by the manufacturer.  
16. Use only with the bracket sold with the apparatus.  
17. Do not attempt to open or disassemble the camera to gain access to the internal  
components. Refer all servicing to qualified service personnel. Servicing is required  
when the apparatus has been damaged in a way, such as power-supply cord or plug  
is damaged, liquid has been spilled or objects have fallen into the apparatus, does  
not operate normally, or has dropped. When servicing, power shall be disconnected.  
Installation Manual  
Bosch Security Systems, Inc.  
| 1.0 D| 20o1w0.1n2 load from Www.Somanuals.com. All Manuals Search And Download.  
WZ16 Integrated IR Bullet Camera  
Safety | en  
5
18. These servicing instructions are for use by qualified service personnel only. To  
reduce the risk of electric shock, do not perform any servicing other than that  
contained in the operating instructions, unless you are qualified to do so.  
1.3  
Important Notices  
Accessories - Do not place this unit on an unstable stand, tripod, bracket, or mount. The  
unit may fall, causing serious injury and/or serious damage to the unit. Use only with  
the cart, stand, tripod, bracket, or table specified by the manufacturer. When a cart is  
used, use caution and care when moving the cart/apparatus combination to avoid injury  
from tip-over. Quick stops, excessive force, or uneven surfaces may cause the cart/unit  
combination to overturn. Mount the unit per the manufacturer’s instructions.  
All-pole power switch - Incorporate an all-pole power switch, with a contact separation  
of at least 3 mm in each pole, into the electrical installation of the building. If it is  
needed to open the housing for servicing and/or other activities, use this all-pole switch  
as the main disconnect device for switching off the voltage to the unit.  
Camera grounding - For mounting the camera in potentially damp environments, ensure  
to ground the system using the ground connection of the power supply connector (see  
section: Connecting external power supply).  
Camera lens - An assembled camera lens in the outdoor housing must comply and be  
tested in accordance with UL/IEC60065. Any output or signal lines from the camera must  
be SELV or Limited Power Source. For safety reasons the environmental specification of  
the camera lens assembly must be within the environmental specification of -10 °C to  
50 °C (14 °F to 122 °F). Camera signal - Protect the cable with a primary protector if the  
camera signal is beyond 140 feet, in accordance with NEC800 (CEC Section 60).  
Camera signal - Protect the cable with a primary protector if the camera signal is beyond  
140 feet, in accordance with NEC800 (CEC Section 60).  
Coax grounding:  
Ground the cable system if connecting an outside cable system to the unit.  
Connect outdoor equipment to the unit’s inputs only after this unit has had its  
grounding plug connected to a grounded outlet or its ground terminal is properly  
connected to a ground source.  
Disconnect the unit’s input connectors from outdoor equipment before  
disconnecting the grounding plug or grounding terminal.  
Follow proper safety precautions such as grounding for any outdoor device  
connected to this unit.  
U.S.A. models only - Section 810 of the National Electrical Code, ANSI/NFPA No.70,  
provides information regarding proper grounding of the mount and supporting structure,  
grounding of the coax to a discharge unit, size of grounding conductors, location of  
discharge unit, connection to grounding electrodes, and requirements for the grounding  
electrode.  
Disposal - Your Bosch product was developed and manufactured with high-quality  
material and components that can be recycled and reused. This symbol means that  
electronic and electrical appliances, which have reached the end of their working life,  
must be collected and disposed of separately from household waste material. Separate  
collecting systems are usually in place for disused electronic and electrical products.  
Please dispose of these units at an environmentally compatible recycling facility, per  
European Directive 2002/96/EC.  
Electronic Surveillance - This device is intended for use in public areas only. U.S. federal  
law strictly prohibits surreptitious recording of oral communications.  
Environmental statement - Bosch has a strong commitment towards the environment.  
This unit has been designed to respect the environment as much as possible.  
Installation Manual  
| 1.0 | 2010.12  
BoscDh SoecwurintylSoyastedmsf,rIoncm. Www.Somanuals.com. All Manuals Search And Download.  
6
en | Safety  
WZ16 Integrated IR Bullet Camera  
Electrostatic-sensitive device - Use proper CMOS/MOS-FET handling precautions to  
avoid electrostatic discharge.  
NOTE: Wear required grounded wrist straps and observe proper ESD safety precautions  
when handling the electrostatic-sensitive printed circuit boards.  
Moving - Disconnect the power before moving the unit. Move the unit with care.  
Excessive force or shock may damage the unit and the hard disk drives.  
Outdoor signals - The installation for outdoor signals, especially regarding clearance  
from power and lightning conductors and transient protection, must be in accordance  
with NEC725 and NEC800 (CEC Rule 16-224 and CEC Section 60).  
Permanently connected equipment - Incorporate a readily accessible disconnect device  
external to the equipment.  
Pluggable equipment - Install the socket outlet near the equipment so it is easily  
accessible.  
Power resupply - If the unit is forced to power down due to exceeding the specified  
operating temperatures, disconnect the power cord, wait for at least 30 seconds, and  
then reconnect the power cord.  
Power lines - Do not locate the camera near overhead power lines, power circuits, or  
electrical lights, nor where it may contact such power lines, circuits, or lights.  
SELV - All the input/output ports are Safety Extra Low Voltage (SELV) circuits. SELV  
circuits should only be connected to other SELV circuits.  
Because the ISDN circuits are treated like telephone-network voltage, avoid connecting  
the SELV circuit to the Telephone Network Voltage (TNV) circuits.  
System ground/Safety ground  
System (video) ground is indicated by the symbol  
.
Safety (power) ground is indicated by the symbol  
.
The system ground is only used to comply with safety standards or installation practices  
in certain countries. Bosch does not recommend connecting system ground to safety  
ground unless it is explicitly required. However, if the system ground and safety ground  
are connected and grounding loops are causing interference in the video signal, use an  
isolation transformer (available separately from Bosch).  
CAUTION!  
Connecting System ground to Safety ground may result in ground loops that can disrupt  
the CCTV system.  
Video loss - Video loss is inherent to digital video recording; therefore, Bosch Security  
Systems cannot be held liable for any damage that results from missing video  
information. To minimize the risk of lost digital information, Bosch Security Systems  
recommends multiple, redundant recording systems, and a procedure to back up all  
analog and digital information.  
Installation Manual  
| 1.0 D| 20o1w0.1n2 load from Www.Somanuals.com. All Manuals Search ABnodschDSeocuwritny lSoysatedms., Inc.  
WZ16 Integrated IR Bullet Camera  
Safety | en  
7
1.4  
FCC & ICES compliance  
FCC Information  
(U.S.A. and Canadian Models Only)  
This equipment has been tested and found to comply with the limits for a Class B digital  
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide  
reasonable protection against harmful interference in a residential installation. This  
equipment generates, uses, and can radiate radio frequency energy and, if not installed  
and used in accordance with the instructions, may cause harmful interference to radio  
communications. However, there is no guarantee that interference will not occur in a  
particular installation. If this equipment does cause harmful interference to radio or  
television reception, which can be determined by turning the equipment off and on, the  
user is encouraged to try to correct the  
interference by one or more of the following measures:  
Fit Ferrite beads on all cable to and from the power supply box, within the box walls.  
Route the composite cable between the camera and the power supply in steel  
conduit piping over the entire run of the cable up to and including connection to a  
deep conduit base fitted under the camera and a conduit fitting adaptor in the wall of  
the PSU box.  
Reorient or relocate the receiving antenna;  
Increase the separation between the equipment and receiver;  
Connect the equipment into an outlet on a circuit different from that to which the  
receiver is connected;  
Consult your Bosch Service Center, dealer, or an experienced radio/TV technician  
for further advice.  
Intentional or unintentional modifications, not expressly approved by the party  
responsible for compliance, shall not be made. Any such modifications could void the  
user’s authority to operate the equipment. If necessary, the user should consult the  
dealer or an experienced radio/television technician for corrective action.  
The user may find the following booklet, prepared by the Federal Communications  
Commission, helpful: How to Identify and Resolve Radio-TV Interference Problems. This  
booklet is available from the U.S. Government Printing Office, Washington, DC 20402,  
Stock No. 004- 000-00345-4.  
Informations FCC et ICES  
(modèles utilisés aux États-Unis et au Canada uniquement)  
Suite à différents tests, cet appareil s’est révélé conforme aux exigences imposées  
aux appareils numériques de classe B, en vertu de la section 15 du règlement de la  
Commission fédérale des communications des États-Unis (FCC), et en vertu de la  
norme ICES-003 d’Industrie Canada. Ces exigences visent à fournir une protection  
raisonnable contre les interférences nuisibles lorsque l’appareil est utilisé dans le  
cadre d’une installation résidentielle. Cet appareil génère, utilise et émet de l’énergie  
de radiofréquences et peut, en cas d’installation ou d’utilisation non conforme aux  
instructions, engendrer des interférences nuisibles au niveau des radiocommunications.  
Toutefois, rien ne garantit l’absence d’interférences dans  
une installation particulière. Il est possible de déterminer la production d’interférences  
en mettant l’appareil successivement hors et sous tension, tout en contrôlant la  
réception radio ou télévision. Lutilisateur peut parvenir à éliminer les interférences  
éventuelles en prenant une ou plusieurs des mesures suivantes:  
Modifier l’orientation ou l’emplacement de l’antenne réceptrice;  
Éloigner l’appareil du récepteur;  
Brancher l’appareil sur une prise située sur un circuit différent de celui du récepteur;  
Consulter le revendeur ou un technicien qualifié en radio/télévision pour obtenir  
de l’aide.  
Installation Manual  
| 1.0 | 2010.12  
BoscDh SoecwurintylSoyastedmsf,rIoncm. Www.Somanuals.com. All Manuals Search And Download.  
8
en | Safety  
WZ16 Integrated IR Bullet Camera  
Toute modification apportée au produit, non expressément approuvée par la partie  
responsable de l’appareil, est strictement interdite. Une telle modification est  
susceptible d’entraîner la révocation du droit d’utilisation de l’appareil.  
La brochure suivante, publiée par la Commission fédérale des communications (FCC),  
peut s’avérer utile : How to Identify and Resolve Radio-TV Interference Problems  
(Comment identifier et résoudre les problèmes d’interférences de radio et de  
télévision). Cette brochure est disponible auprès du U.S. Government Printing Office,  
Washington, DC 20402, États-Unis, sous la référence n° 004-000-00345-4  
NOTICE!  
This is a class B product. In a domestic environment this product may cause radio  
interference, in which case the user may be required to take adequate measures.  
1.5  
CSA certification  
Disclaimer  
CSA has not tested the performance or reliability of the security or signaling aspects  
of this product. CSA has only tested fire, shock and/or casualty hazards as outlined in  
CSA’s Standard(s) for Safety for Audio, Video and Similar Electronic Apparatus. Safety  
Requirements UL 60065. CSA Certification does not cover the performance or reliability  
of the security or signaling aspects of this product. CSA MAKES NO REPRESENTATIONS,  
WARRANTIES, OR CERTIFICATIONS WHATSOEVER REGARDING THE PERFORMANCE OR  
RELIABILITY OF ANY SECURITY OR SIGNALING RELATED  
FUNCTIONS OF THIS PRODUCT.  
1.6  
Warranty / Limitation of Liability  
The Night Vision B&W & DSP Color CCD Camera has a three-year warranty.  
BOSCH Security Systems warrants that its products, at the time of shipment by BOSCH  
Security Systems, are free from defect in material or workmanship under normal use and  
service for the respective warranty periods specified in the applicable Price Schedule or  
as otherwise published. To assure conformance with operating limitations, Buyer should  
refer to the applicable data sheet.  
The warranty is void (i) if the Product is not operated in conformance with installation,  
environmental, mechanical or electrical requirements, or within thermal stress limits, or  
(ii) to the extent that any malfunction is the result of misuse, abuse, vandalism, neglect,  
improper installation or application, alteration, accident, or negligence in use, storage,  
transportation, or handling or if the original identification markings on the product have  
been removed, defaced or altered, lightning, electricity, water, fire, environment or other  
hazard, or act of God, or other impact outside of normal operating guidelines.  
The foregoing warranty is subject to Buyer’s (i) promptly written claim and (ii) timely  
provision to BOSCH Security Systems of an opportunity to inspect and test the Product  
claimed to be defective. Such inspection may be on Buyer’s premises and/or BOSCH  
Security Systems may request the return of the Product at Buyer’s expense. However,  
BOSCH Security Systems shall not be responsible for packing, inspection, or labor costs  
in connection with the return of Product. No Product shall be accepted for warranty  
service that is not accompanied by a Return Authorization issued by BOSCH Security  
Systems.  
Installation Manual  
| 1.0 D| 20o1w0.1n2 load from Www.Somanuals.com. All Manuals Search ABnodschDSeocuwritny lSoysatedms., Inc.  
WZ16 Integrated IR Bullet Camera  
Safety | en  
9
The liability of BOSCH Security Systems hereunder or otherwise is solely and exclusively  
limited to replacement (new or refurbished Product), repair, or credit of the amortized  
purchase price, as BOSCH Security Systems may elect, for any Product which is returned  
by Buyer during the applicable warranty period, or services for which timely notice of  
defect has been given by Buyer, and which are found by BOSCH Security Systems to be  
subject to adjustment under this warranty.  
BOSCH Security Systems’ warranty shall not be enlarged, diminished, or affected by, and  
no obligation or liability shall arise or grow out of BOSCH Security Systems’ rendering or  
technical advice, facilities, or services in connection with Buyer’s order to the products  
furnished hereunder.  
For more information about the warranty on this product, see the Warranty Repair  
CustomerCare.  
NOTICE!  
Do not remove the serial sticker for the warranty service. Doing so will void the  
warranty.  
Installation Manual  
| 1.0 | 2010.12  
BoscDh SoecwurintylSoyastedmsf,rIoncm. Www.Somanuals.com. All Manuals Search And Download.  
10  
en | Introduction  
WZ16 Integrated IR Bullet Camera  
2
Introduction  
The WZ16 Integrated IR Bullet Camera is a night vision DSP Color CCD camera that uses  
a 1/3” CCD solid-state imaging device that provides superior performance. The camera  
can be installed easily in most indoor and outdoor locations.  
Features include:  
– Day/night operation  
– Infrared, photocell-controlled LEDs  
– Weight of less than 1.5 pounds / 0.6 kg  
– IP67 rating  
– Operates at temperature range from -30 °C to +55 °C ( - 22°F to + 131°F) at up to 80%  
humidity  
2.1  
Parts Included  
Quantity Item  
1
1
3
1
1 WZ16 Integrated IR Bullet Camera  
Mounting bracket  
Mounting screws  
Installation Manual  
Installation Manual  
| 1.0 D| 20o1w0.1n2 load from Www.Somanuals.com. All Manuals Search ABnodschDSeocuwritny lSoysatedms., Inc.  
WZ16 Integrated IR Bullet Camera  
Installation and Connection | en  
11  
3
Installation and Connection  
DANGER!  
RISK OF ELECTRIC SHOCK! DO NOT OPEN THE UNIT!  
WARNING!  
To prevent injury, this apparatus must be securely attached to the floor/wall in  
accordance with the following installation instructions.  
CAUTION!  
Do not install the camera near electric or magnetic fields. If possible, do not install in a  
kitchen or boiler room as heat will affect the camera.  
CAUTION!  
Do not use a power source other than the one specified. An unregulated power supply  
can cause damage to the camera. Use of an unregulated power supply will void the  
product warranty.  
1. Select a mounting surface that is strong enough to support the camera.  
2. Connect the camera to either a 12VDC (recommended for best picture and the most  
stable camera operation) or 24 VAC regulated power supply.  
3. Face the camera away from the sun or any bright or reflective light. Excess light on  
the lens may cause smear on the picture and possible damage to the CCD.  
CAUTION!  
To prevent humidity problems, the camera must be installed in dry conditions, and the  
cable leads should be sealed once connected.  
Figure 3.1 Camera mounted on ceiling  
Installation Manual  
| 1.0 | 2010.12  
BoscDh SoecwurintylSoyastedmsf,rIoncm. Www.Somanuals.com. All Manuals Search And Download.  
12  
en | Installation and Connection  
WZ16 Integrated IR Bullet Camera  
Figure 3.2 Camera mounted (from bottom) on Wall  
Figure 3.3 Camera mounted (from top) on Wall  
4. Connect the camera to the video monitor. Bosch recommends using a monitor with a  
CCTV quality 75Ω video impedance level. If your monitor is switched to high  
impedance, please adjust the monitor accordingly.  
Figure 3.4 Standard 12 VDC BNC(RCA) Connection  
Number Description  
1
2
3
12 VDC or 24 VAC regulated power supply  
Video in  
BNC (RCA) Female video  
Installation Manual  
| 1.0 D| 20o1w0.1n2 load from Www.Somanuals.com. All Manuals Search ABnodschDSeocuwritny lSoysatedms., Inc.  
WZ16 Integrated IR Bullet Camera  
Configuration | en  
13  
4
Configuration  
Follow the steps below to adjust the zoom and focus. Remove the lens cap before  
making adjustments, then replace it when you finish. Refer to the figure below.  
Figure 4.1 Lens adjustment  
Number Description  
1
2
3
Zoom control  
Focus control  
Video brightness  
CAUTION!  
To prevent humidity problems, the camera must be installed in dry conditions.  
Removing the lens cap in a wet or humid environment may result in condensation on  
the front window.  
4.1  
4.2  
4.3  
Adjusting the Zoom  
1. Loosen the Zoom lock screw by turning it counterclockwise.  
2. Adjust the zoom by moving the Zoom lever to Tele side or Wide side.  
3. Turn the Zoom lock screw clockwise to tighten the focus lever after adjustment.  
Adjusting the Focus  
1. Loosen the focus lock screw by turning it counterclockwise.  
2. Adjust the focus by moving the focus lever to near side or far side.  
3. Turn the focus lock screw clockwise to tighten the focus lever after adjustment.  
Adjusting the Video Output Brightness  
1. Adjust the brightness from VR according to the environment.  
Installation Manual  
| 1.0 | 2010.12  
BoscDh SoecwurintylSoyastedmsf,rIoncm. Www.Somanuals.com. All Manuals Search And Download.  
14  
en | Troubleshooting  
WZ16 Integrated IR Bullet Camera  
5
Troubleshooting  
5.1  
Troubleshooting Tips  
Before sending the camera out for repair, check the items below. If the problem persists  
after checking these items, contact your service center.  
- If no image appears, verify that:  
– The coaxial cable is attached securely.  
– The power and voltage are normal.  
– There is adequate illumination.  
- If the image is unclear, verify that:  
– The lens is in focus.  
– The lens is not dirty. Dirt or fingerprints on the lens can adversely affect the images.  
Gently wipe any dirt or fingerprints off the lens with a soft cloth or lens cleaning paper  
and cleaning fluid (available commercially).  
– The monitor is adjusted correctly.  
Installation Manual  
| 1.0 D| 20o1w0.1n2 load from Www.Somanuals.com. All Manuals Search ABnodschDSeocuwritny lSoysatedms., Inc.  
WZ16 Integrated IR Bullet Camera  
Technical Specifications | en  
15  
6
Technical Specifications  
Electrical  
Power  
12 VDC (±10%) Max 700 mA  
24 VAC (±10%) Max 7 W  
Surge Suppression  
Power Input  
Peak current: 2000 A (8/20 μs)  
Peak power: 5500 W (2 ms)  
Videos  
Signal Format  
Image Device  
Scanning Systems  
Horizontal  
Resolution  
NTSC  
PAL  
NTSC  
PAL  
1/3 in. Super HAD CCD  
2 : 1 Interlace  
540 TVL  
1/3 in. Super HAD CCD II  
Total Pixels  
Effective Pixels  
811 x 508  
768 x 494  
795 x 596  
752 x 582  
811 x 508  
768 x 494  
795 x 596  
752 x 582  
Signal-to-Noise Ratio > 45 dB (with AGC off)  
Sensitivity/  
Min. Illumination  
Day: .5 Lux / F2.0  
Night: 0.00 Lux (IR LED On)  
Video Output  
IR LED  
Composite Video 1 Vpp, 75 Ohm unbalanced  
18 ea.  
IR LED Wavelength  
IR Beam Range  
LED Operation  
850 nm  
up to 20 meters  
Turn On: 2 Lux  
Turn Off: 4 Lux  
Mechanical  
Dimensions (H x W x L)  
– Camera  
115 mm x 60 mm x 60 mm  
(4.53 in. x 2.36 in. x 2.36 in.)  
– Bracket  
115 mm x 60 mm x 60 mm  
(4.53 in. x 2.36 in. x 2.36 in.)  
Weight  
– Camera and Bracket  
Construction  
Color  
0.56 kg (1.2 lbs)  
Robust aluminum extrusion  
Silver gray  
Finish  
Painted  
Bracket  
Pan-tilt bracket included  
Bracket Pan/Tilt Range Pan: ±90° (180° total)  
Tilt: ±50° (100° total)  
Environmental  
– Operating Temperature  
Storage Temperature  
Operating Humidity  
–10 °C to +50 °C (14 °F to 122 °F)  
–20 °C to +60 °C (–4 °F to 140 °F)  
10% to 80% (condensing or non-condensing?)  
Installation Manual  
| 1.0 | 2010.12  
BoscDh SoecwurintylSoyastedmsf,rIoncm. Www.Somanuals.com. All Manuals Search And Download.  
16  
en | Technical Specifications  
WZ16 Integrated IR Bullet Camera  
Dimensions  
Below are several dimensional drawings of the camera. Unit of measure is mm.  
Figure 6.1 Front view  
Number Description  
1
Photocell  
18 LED  
Figure 6.2 ottom view  
B
Figure 6.3  
Side view  
Installation Manual  
| 1.0 D| 20o1w0.1n2 load from Www.Somanuals.com. All Manuals Search ABnodschDSeocuwritny lSoysatedms., Inc.  
WZ16 Integrated IR Bullet Camera  
Technical Specifications | en  
17  
Figure 6.4  
Mounting bracket  
Installation Manual  
| 1.0 | 2010.12  
BoscDh SoecwurintylSoyastedmsf,rIoncm. Www.Somanuals.com. All Manuals Search And Download.  
 
 
Bosch Security Systems, Inc.  
850 Greenfield Road  
Lancaster, PA 17601  
U.S.A.  
© Bosch Security Systems, Inc., 2011  
 

Black Decker Automobile Battery Charger BDV1084 User Manual
Black Decker Oven TRO700b User Manual
Bradford White Corp Water Heater 12 User Manual
Briggs Stratton Pressure Washer 20358 User Manual
Canon Camera Lens 8806A002 User Manual
Canon Projector LV 7105 User Manual
Carrier Range 28GH User Manual
Casio Cell Phone C731 User Manual
Chief Manufacturing Projector Accessories MSP DUK9000 User Manual
Chief Manufacturing TV Mount PAC502 User Manual