Taking Calls
In a Noisy Environment?
Upgrades
Quick Start Guide
English
4
8
12
You can answer the call with your
voice: wait for the prompt to finish
and then say Answer or Ignore.
The Q1 has been designed to reduce background
noise and wind interference.
To enhance your experience, we are continually
improving the Q1 software.
If you find yourself in a very noisy or windy
From time to time we will make feature
enhancements available on our website for you to
download and apply to your Q1.
If you don’t want to wait for the
prompt, or you are in a noisy place:
environment, double click the
button during a
call to switch between standard and maximum noise
reduction settings.
> Click the
button once to accept the call.
Go to q1.blueantwireless.com to get the latest
software for your Q1.
> Double click the
button to reject the call.
To End a Call
Click the
button.
Let’s Get Started
Main Voice Commands
Charging
9
Problems?
13
1
5
1. Put the Q1 in your ear.
If you are having trouble, you can
reset the Q1 and start again:
> Am I Connected?
> Answer
Your Q1 has been given an
2. Hold down the
button until you hear
the welcome message
(about 3 seconds).
initial charge to get started, but in future you need to
charge it for up to 2.5 hours.
Am I
Connected?
1. Make sure the Q1
is on and is not
connected to any phones.
> Call Back
If the
button flashes red when you switch the Q1
> Call Information
> Call Speed Dial 1-8
> Cancel
on, the battery is low. Use the supplied AC adaptor
and USB cable to charge the Q1.
3. Follow the voice
prompts to pair the Q1
with your phone.
2. Click Vol +, Vol -
and the
button
together.
> During charging, the
flashes red.
> Check Battery
> Ignore
> When the light goes blue, the charge is complete.
That’s it! You’re ready to go.
3. You will hear the welcome message.
> For safety reasons, the Q1 automatically turns off
during charging.
Tip: The code for the Q1 is 0000 (four zeros).
WARNING: Prolonged use at high volumes can cause noise induced hearing loss.
Follow the voice prompts to
pair the Q1 with your phone.
> Pair Me
Use your Voice
2
Main Voice Commands
Switching On and Off
10
Help and Support
6
14
button
to Control the Q1
> Phone Commands
> Redial
To switch the
Q1 on or off
hold down
This guide is just to get you started with your Q1.
(BlueAnt button)
When you want to
Pair
Me
If you are having trouble getting the Q1 to work, visit
docs.blueantwireless.com to download the user
guide, which has full details of all the Q1’s features
and functions.
Microphones
do something:
> Settings Menu
> Switch Headset Off
> Teach Me
the
button
1. Click the
button
for about 3
seconds.
and wait for the
Q1 to ask you to
Please call us before returning the Q1 to a store and
we will help you through any difficulty you may have.
“Say a Command”.
Switch
Headset
Off
Vol -
Vol +
> What Can I Say?
2. Say one of the
voice commands
loudly and clearly.
You can also switch
off using this voice
command:
> In North America call 1 866 891 3032.
Tip: Use the Teach Me command to learn about your
Q1, or say What Can I Say? to hear a list of all the
voice commands.
> In other countries please see
www.blueantwireless.com for your local support
number.
To learn the voice commands, say What Can I Say?
Making Calls
A2DP Audio Streaming
7
The Q1 supports A2DP audio streaming: if your
phone supports A2DP streaming you can play music,
podcasts or any other audio and it will automatically
be streamed to the Q1.
Pairing Another Phone
Terms and Conditions
15
3
11
By using this product you are agreeing to BlueAnt’s terms and
Click the
button and wait for the Q1 to ask you
The Q1 automatically
goes into pairing
mode the first time
you switch it on.
to “Say a Command”. Then say one of the voice
commands:
In order to activate your full warranty coverage, please
> Say Redial to redial the last number you called.
> Say Call Back to return the last call you received.
Warning: All BlueAnt headsets are designed to reach volumes
of up 100 decibels. Prolonged use at high volumes may affect
your hearing capacity. Using for extensive time periods may
result in noise induced hearing loss (NIHL).
You only need to pair your phone once, but if you
want to pair another phone later on, just say Pair Me.
You can also use this feature to hear turn-by-turn
direction information from a GPS application on your
phone. Simply start the GPS application and the
audio will automatically transfer to your headset.
> The Q1 can store pairing information for up to 8
> Say Phone Commands to use phone voice dialling
(if your phone supports it).
Bluetooth® devices.
The Bluetooth® word mark and logos are registered
trademarks owned by Bluetooth SIG, Inc. and any use of such
marks by BlueAnt Wireless is under license.
> Up to 2 devices can be connected at the same
The audio will automatically pause if you make or
time and you can answer whichever one rings
> Say Call Speed Dial followed by 1 to 8.
receive a phone call, and resume when the call ends.
© 2009 BlueAnt Wireless. All Rights Reserved.
(multipoint).
|