JPMT1024-ANG
45° Side-Exiting Multmedia Panel
45° Side-Exiting Multimedia Panel
Black Box Tech
Support: FREE! Live.
24/7. Tech support
the way it should be.
Direction of
IDC slot
Angles ports
to the sides.
Helps to reduce stress on the ports.
Horizontal cable management is not required.
Great tech support is just 30 seconds
away at 724-746-5500 or blackbox.com.
Figure 5. IDC slot position.
6. Secure the back cables with the supplied cable ties.
NOTE: Do not overtighten the cables.
7. Figure 6 shows a completed installation.
1. Specifications
Size: Without rear base installed: 1.75”H (1U) x
19”W x 0.625”D (4.5 x 48.3 x 1.6 cm);
With rear base installed: 1.75”H (1U) x 19”W x
5”D (4.5 x 48.3 x 12.7 cm)
Order toll-free in the U.S.:
Call 877-877-BBOX
Customer
Support
Information
(outside U.S. call 1-724-746-5500)
FREE technical support
24 hours a day, 7 days a week:
Call 724-746-5500 or
Weight: 1.5 lb. (0.7 kg)
fax 724-746-0746
Figure 6. Completed patch panel installation.
2. Overview
Mailing address:
Black Box Corporation
1000 Park Drive
2.1 Introduction
The 24-Port 45° Side-Exiting Multimedia Panel
angles ports to the sides, which helps reduce
stress on the ports and eliminates the need for
horizontal cable management. The rear of the
panel has an optional cable support bar that
provides support to horizontal cables accessing
the panel.
Lawrence, PA 15055-1018
E-mail: [email protected]
© Copyright 2011. Black Box Corporation. All rights reserved.
Black Box and the Double Diamond logo are registered trademarks of
BB Technologies, Inc. Any other trademarks mentioned in this manual
are acknowledged to be the property of the trademark owners.
JPMT1024-ANG, rev. 1
Page 5
Page 6
JPMT1024-ANG
724-746-5500
|
blackbox.com
724-746-5500
|
blackbox.com
724-746-5500
|
blackbox.com
|