OmniView® SMB KVM-over-IP Switch
Specifications
Model No.
F1DP108G
F1DP116G
No. of Users Supported
No. of Servers Supported
Daisy-Chain
1 digital or 1 local
1 digital or 1 local
8 (248 total)
16 (256 total)
Maximum of 16 Switches*
Metal with plastic faceplate
Maximum of 16 Switches*
Metal with plastic faceplate
Enclosure
17.25 (W) x 1.75 (H) x 7.5 (L) in.
(438 x 45 x 190mm)
17.25 (W) x 1.75 (H) x 7.5 (L) in.
(438 x 45 x 190mm)
Dimensions
Weight
5.0 lbs. (2.3kg.)
5.0 lbs. (2.3kg.)
Web-Based User Interface
Provides quick setup and configuration,
and easy access to servers using your
web browser.
Power/Environment
Power Requirements
Operating Temperature
Storage Temperature
100–240VAC @ 47–63Hz
32° to 104° F (0 to 40° C)
-4° to 140° F (-20 to 60° C)
Hardware Supported
Monitors
VGA
PS/2
Keyboards/Mice
Local analog port: 1600x1200 @ 75Hz
Digital port: 1600x1200 @ 75Hz
Video Resolution
Windows® NT®, 2000, XP, Server 2003; DOS; Linux® 8.x and above;
SunTM; Novell® 5.x; SolarisTM 8.x and above
Operating Systems
Network Connection
Ethernet Port
RJ45 (10/100Base-T connection)
Typical Bandwidth
Browsers Supported
0.31Mbps**
Microsoft® Internet Explorer 6.0 and above with ActiveX® support
Ports
Local Console
Servers
HDDB15 (VGA), MiniDIN6 (PS/2)
RJ45
RJ45
RJ11
IEC
Serial Device
Flash Upgrade
Power
Warranty
2 years
*May be daisy-chained with up to 15 OmniView SMB and PRO2 KVM Switches. OmniView SMB KVM-over-IP Switches
may not be daisy-chained together.
**Typical bandwidth is defined as typical “non-intensive” administrative use at 16-bit color, 1024x768 resolution.
Port Selectors
Package Contents
OmniView SMB KVM-over-IP Switch
Rack-Mount Brackets with Screws
IEC Power Cord
DB9-to-RJ45 Serial Cable
DB9-to-RJ11 Flash-Upgrade Cable
User Manual
Local Console
Server Connections
Connections
Using CAT5 Cabling
AC Power
Dedicated
Daisy-Chain Port
Quick Installation Guide
Flash-Upgrade Port
Ethernet Connection
for Digital Access
Serial Device Port
Cooling Fan
Server Interface Module
Connects your server to the Switch using CAT5 cabling. Emulates keyboard and mouse signals to keep servers running if power is lost
to Switch. Includes 6-foot CAT5e patch cable. One module is required per server.
Specifications
Model No.
F1DP101A-AP
F1DP101A-AU
F1DP101A-AL
1.8 x 3.5 x 0.9 in.
(46 x 89 x 23mm)
1.8 x 3.5 x 0.9 in.
(46 x 89 x 23mm)
1.8 x 3.5 x 0.9 in.
(46 x 89 x 23mm)
Dimensions
Weight
0.25 lbs. (0.11kg.)
Via attached server
RJ45
0.25 lbs. (0.11kg.)
Via attached server
RJ45
0.25 lbs. (0.11kg.)
Via attached server
RJ45
Power
KVM Connection
Keyboard/Mouse Connection
Video Connection
MiniDIN6 (PS/2)
HDDB15 male (VGA)
USB Type A
MiniDIN8 (Sun)
HDDB15 male (VGA)
HDDB15 male (VGA)
Part Number
Description
MSRP
F1DP108G
OmniView SMB 1x8 KVM-over-IP Switch
$999.99
$1,299.99
$79.99
F1DP116G
OmniView SMB 1x16 KVM-over-IP Switch
F1DP101A-AP
F1DP101A-AU
F1DP101A-AL
F1DP101A-AP-8PK
OmniView SMB Server Interface Module, PS/2
OmniView SMB Server Interface Module, USB
OmniView SMB Server Interface Module, Legacy Sun
OmniView SMB Server Interface Module, PS/2 (8-Pack)
$79.99
$79.99
$349.99
Note: Specifications are subject to change without notice.
Belkin Corporation
310-898-1100
Los Angeles, CA 90220, USA
Belkin Ltd.
+44 (0) 1933 35 2000
Rushden, United Kingdom
Belkin Ltd.
+61 (0) 2 4372 8600
Tuggerah, Australia
© 2006 Belkin Corporation. All rights reserved. All trade names are registered trademarks of respective manufacturers listed. Microsoft, Windows, NT, and ActiveX are either
registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. 26PB057-B
|