Installation Guide for
Zoom/Video Cam
Installing your new Zoom/Video Cam is
easy:
Getting Started
1
Prepare your computer. You have the option of
using the Zoom/Video Capture Card or enabling
an existing Zoom/Video Ready Faxmodem for video
capture.
Installing the Internal Card
2
If you do not have a Zoom/Video Ready Faxmo-
dem, install the video capture card. This involves
shutting off your computer and plugging the mo-
dem card into a slot on the main board of the com-
puter. It’s easy to do even if you’ve never had the
case off your computer.
Updating Your Faxmodem
2A
If you already have a Zoom/Video Ready Fax-
modem, or if you have just installed one, you can
run a program that will upgrade the modem card
and enable video capture.
Completing the Installation
3
Plug in the Video Camera and install some soft-
ware drivers so Windows knows what to do with
the camera. The Windows Hardware Wizard guides
you through most of the procedure. You can also
plug in the lapel microphone that comes with your
camera.
Installing Video Software
4
Install VideoLink and VideoLink Mail, video pro-
grams that enable you to record video mail, do vid-
eoconferencing, and make video telephone calls.
Also install other software that comes on your
Zoom Link CD.
Each step is described in the accompanying numbered
flyers. We suggest you read through all the flyers before
NOTICE
This document contains proprietary information protected
by copyright, and this Installation Guide and all the ac-
companying hardware are copyrighted. All rights are re-
served. No part of this document may be photocopied or
reproduced by mechanical, electronic, or other means in
any form, except for the personal use of the owner.
The manufacturer does not warrant that the hardware will
work properly in all environments and applications.
Although the hardware has been tested, the manufacturer
makes no warranty and representation, either implied or
expressed, with respect to the hardware and the documen-
tation, quality, performance, merchantability, or fitness for
a particular purpose. The manufacturer reserves the right
to make changes to the hardware and Installation Guide
content without obligation to notify any person or organi-
zation of the revision or change.
All brand and product names are the trademarks of their
respective owners.
© Copyright 1998
All rights reserved.
1888-A
25980
©1998
|