U
DVD PLAYER
LECTEUR DE DVD
DVD-S659
HDMI
FCC INFORMATION (for US customers)
1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!
This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications
not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product.
2. IMPORTANT: When connecting this product to accessories and/or another product use only high quality shielded cables.
Cable/s supplied with this product MUST be used. Follow all installation instructions. Failure to follow instructions could void
your FCC authorization to use this product in the USA.
3. NOTE: This product has been tested and found to comply with the requirements listed in FCC Regulations, Part 15 for Class
“B” digital devices.
Compliance with these requirements provides a reasonable level of assurance that your use of this product in a residential
environment will not result in harmful interference with other electronic devices. This equipment generates/uses radio
frequencies and, if not installed and used according to the instructions found in the users manual, may cause interference
harmful to the operation of other electronic devices. Compliance with FCC regulations does not guarantee that interference
will not occur in all installations. If this product is found to be the source of interference, which can be determined by turning
the product “OFF” and “ON”, please try to eliminate the problem by using one of the following measures:
Relocate either this product or the device that is being affected by the interference.
Utilize power outlets that are on different branch (circuit breaker or fuse) circuits or install AC line filter/s.
In the case of radio or TV interference, relocate/reorient the antenna. If the antenna lead-in is 300 ohm ribbon lead, change
the lead-in to coaxial type cable.
If these corrective measures do not produce satisfactory results, please contact the local retailer authorized to distribute this
type of product. If you can not locate the appropriate retailer, please contact Yamaha Electronics Corp., 6660 Orangethorpe
Ave. Buena Park, CA90622.
The above statements apply ONLY to those products distributed by Yamaha Corporation of America or its subsidiaries.
We Want You Listening For A Lifetime
YAMAHA and the Electronic Industries Association’s Consumer Electronics Group want you to get the most out of your
equipment by playing it at a safe level. One that lets the sound come through loud and clear without annoying blaring or
distortion - and, most importantly, without affecting your sensitive hearing.
Since hearing damage from loud sounds is often undetectable until it is too late, YAMAHA and the Electronic Industries
Association’s Consumer Electronics Group recommend you to avoid prolonged exposure from excessive volume levels.
SECURITE LASER
L’appareil utilise un laser. En raison des risques de
blessure des yeux, le retrait du couvercle ou les
réparations de l’appareil devront être confiés
exclusivement à un technicien d’entretien qualifié.
DANGER
Risque d’exposition au laser en cas d’ouverture.
Eviter toute exposition au faisceau.
Lorsque cet appareil est branché à la prise de
AVOID DIRECT EXPOSURE TO THE BEAM
DANGER:
INVISIBLE LASER RADIATION WHEN OPEN
DO NOT STARE INTO BEAM
INVISIBLE LASER RADIATION WHEN OPEN
CAUTION:
courant, ne pas approcher les yeux de l’ouverture
du plateau changeur et des autres ouvertures
pour regarder à l’intérieur.
SEGURIDAD CONTRA LA RADIACIÓN
LÁSER
Esta unidad utiliza rayos láser. Debido a la
posibilidad de que se produzcan daños en los ojos,
la extracción de la cubierta de la unidad o las
LASER SAFETY
This unit employs a laser. Due to possible eye
injury, only a qualified service person should
remove the cover or attempt to service this device.
PELIGRO
Esta unidad emite radiación láser visible cuando se
abre. Evite la exposición directa a los rayos láser.
Cuando esta unidad esté enchufada a una toma
de corriente, no ponga sus ojos cerca de la
abertura de la bandeja del disco ni otras aberturas
para mirar al interior.
DANGER
This unit emits visible laser radiation when open.
Avoid direct eye exposure to beam.
When this unit is plugged into a wall outlet, do not
place your eyes close to the opening of the disc
tray and other openings or look inside.
ii
CAUTION: READ THIS BEFORE OPERATING THIS UNIT.
1
2
To assure the finest performance, please read this
manual carefully. Keep it in a safe place for future
reference.
15 Be sure to read the “Troubleshooting” section on
common operating errors before concluding that
this unit is faulty.
16 Before moving this unit, press STANDBY/ON to
set the unit in standby mode, and then disconnect
the AC power plug from the wall outlet.
17 Install this unit near the AC wall outlet and where
the AC power plug can be reached easily.
Install this unit in a well ventilated, cool, dry, clean
place — away from direct sunlight, heat sources,
vibration, dust, moisture, or cold. In a cabinet,
allow about 2.5cm (1 inch) of free space all
around this unit for adequate ventilation.
Locate this unit away from other electrical appliances,
motors, or transformers to avoid humming sounds.
Do not expose this unit to sudden temperature
changes from cold to hot, nor locate this unit in
an environment with high humidity (i.e., a room
with a humidifier) to prevent condensation inside
this unit, which may cause an electrical shock, fire,
damage to this unit, and/or personal injury.
Avoid installing this unit where foreign objects
may fall onto this unit and/or this unit may be
exposed to liquid dripping or splashing. On the
top of this unit, do not place:
3
4
This unit is not disconnected from the AC power
source as long as it is connected to the wall outlet,
even if this unit itself is tuned off. This is called the
standby mode. In this state, this unit is designed to
consume a very small quantity of power.
FOR CANADIAN CUSTOMERS
To prevent electric shock, match wide blade of plug
to wide slot and fully insert.
This Class B digital apparatus complies with
Canadian ICES-003.
5
– Other components, as they may cause damage
and/or discoloration on the surface of this unit.
For Customer Use:
Read carefully the information located at the rear
panel of this unit and enter below the Serial No.
Retain this information for future reference.
–
Burning objects (i.e., candles), as they may cause
fire, damage to this unit, and/or personal injury.
– Containers with liquid in them, as they may fall,
spilling the liquid and causing an electrical
shock to the user and/or damage to this unit.
Do not cover this unit with a newspaper, tablecloth,
curtain, etc. in order not to obstruct heat radiation.
If the temperature inside this unit rises, it may cause
fire, damage to this unit, and/or personal injury.
Do not plug in this unit to a wall outlet until all
connections are complete.
Do not operate this unit upside-down. It may
overheat, possibly causing damage.
Do not use excessive force on switches, knobs
and/or cords.
Model No.
Serial No. __________________________
6
CAUTION
Use of controls or adjustments or performance of
procedures other than those specified herein may
result in hazardous radiation exposure.
7
8
9
LASER
Type
Wave length
Semiconductor laser GaAlAs
650 nm (DVD)
780 nm (VCD/CD)
7 mW (DVD)
Output Power
10 When disconnecting the power cord from the
wall outlet, grasp the plug; do not pull the cord.
11 Do not clean this unit with chemical solvents; this
might damage the finish. Use a clean, dry cloth.
12 Use only the voltage specified on this unit. Using
this unit with a higher voltage than specified is
dangerous and may cause fire, damage to this unit,
and/or personal injury. YAMAHA will not be held
responsible for any damage resulting from use of
this unit with a voltage other than as specified.
13 Do not attempt to modify or fix this unit. Contact
qualified YAMAHA service personnel when any
service is needed. The cabinet should never be
opened for any reason.
10 mW (VCD/CD)
Beam divergence 60 degree
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN
OR MOISTURE.
14 When not planning to use this unit for long
periods of time (i.e., vacation), disconnect the AC
power plug from the wall outlet.
iii
Contents
Introduction
Disc Operation
Region codes...............................................................3
Supplied accessories..................................................3
Notes about discs/content format.........................3
Cleaning discs..............................................................4
Patent information.....................................................4
Basic playback...........................................................14
General operation...................................................14
Pausing playback.................................................................14
Selecting track/chapter...................................................14
Searching backward/forward.......................................14
Stopping playback..............................................................14
Selecting the various repeat/shuffle functions....15
Repeat and shuffle.............................................................15
Repeating a section within a chapter/track.........15
Operations for video playback (DVD/VCD/SVCD) ...15
Using the disc menu.........................................................15
Slow motion.........................................................................15
Zooming in............................................................................16
Resuming playback from the last stopped point....16
On-screen display (OSD).............................................16
Special DVD features .............................................17
Playing by title......................................................................17
Camera angle.......................................................................17
Audio........................................................................................18
Subtitles...................................................................................18
Special VCD/SVCD features.................................18
Playback control (PBC)..................................................18
Preview function................................................................18
Playing data discs (MP3/WMA/JPEG/DivX).......... 19
General operation.............................................................19
Selecting a folder and track/file..................................20
Repeat and shuffle.............................................................20
Special picture disc features..................................20
Preview function................................................................20
Zooming pictures..............................................................20
Playback with multi-angles............................................21
Scan effect..............................................................................21
Playing MP3 music and JPEG picture
Functional Overview
Front panel ..................................................................5
Rear panel....................................................................5
Remote control..........................................................6
Connections
General notes on connections................................7
Audio connections.....................................................7
Digital connection................................................................7
Analog connection...............................................................7
Video connections .....................................................8
Component video jacks <A>.......................................8
S-video jack <B>..................................................................8
Composite video jack <C> ...........................................8
HDMI connections.....................................................9
HDMI jack.................................................................................9
Getting Started
Step 1: Inserting batteries into the remote control...10
Using the remote control.............................................10
Step 2: Turning on the power.............................. 11
Step 3: Setting a TV type and display.................. 11
Setting a color system for your TV.........................11
Setting an aspect ratio for your TV.........................12
Step 4: Setting a language preference................. 12
Setting the OSD Language...........................................12
Setting the audio, subtitle and disc menu
simultaneously.....................................................................21
Special DivX features .............................................21
Interactive menu ................................................................21
Multiple audio and subtitle languages ....................21
languages (DVD-Video only)......................................13
1 En
Contents
Setup Menu
Language Codes......................... 36
Troubleshooting ........................ 38
Glossary ...................................... 40
Specifications ............................. 42
General setup menu............................................... 22
Locking/Unlocking the disc for viewing.................22
Dimming the front panel display...............................22
Programming disc tracks (except MP3/WMA/
JPEG/DivX)............................................................................22
OSD language .....................................................................23
Screen saver .........................................................................23
Sleep timer............................................................................23
Auto standby........................................................................24
®
DivX VOD registration code..................................24
Audio setup menu................................................... 24
Setting the analog output..............................................24
Setting the digital output...............................................25
Setting the HDMI audio.................................................26
CD upsampling...................................................................26
Night mode...........................................................................26
Lip synchronization...........................................................27
Video setup menu................................................... 27
TV type....................................................................................27
Setting the TV display.....................................................27
Progressive ............................................................................28
Picture setting......................................................................29
Selecting the black level.................................................30
Closed caption....................................................................30
HDMI setup..........................................................................30
Preference setup menu.......................................... 31
Audio, subtitle and disc menu....................................32
Restricting playback with parental control..........32
Playback of VR format....................................................32
MP3/JPEG menu.................................................................34
Displaying DivX external subtitle files ...................34
Changing the password..................................................35
PBC (Playback control)..................................................35
Resetting the system........................................................35
2 En
Introduction
Thank you for purchasing this unit. This
Owner’s Manual explains the basic
operation of this unit.
– This unit can play the following data
discs (For MP3 and WMA files, the
parenthetic words represent the
compatible sampling rate and bit rate):
– MP3 files recorded on CD-R/RW,
DVD+R/RW and DVD-R/RW
(fs 32, 44.1, 48 kHz / 96 – 320 kbps
(CBR only))
– WMA (except copy protected
WMA) files recorded on CD-R/RW,
DVD+R/RW and DVD-R/RW
(When in fs 44.1 kHz: 64 – 192 kbps
(CBR only)/ When in fs 48 kHz: 128 –
192 kbps (CBR only))
Region codes
DVD discs must be labeled ALL
regions or Region 1 in order to
play on this unit.
ALL
You cannot play discs labeled for
other regions.
1
Supplied accessories
– JPEG (except Progressive JPEG) files
recorded on CD-R/RW, DVD+R/
RW and DVD-R/RW (compatible
resolution: 3072 x 2048 or less)
– KODAK Picture CD
– Remote control
– Two batteries (AA, R06, UM-3) for the
remote control
– Audio/Video pin cable
(red/white/yellow plugs)
– Owner’s Manual
– FUJICOLOR CD
– DivX Video files recorded on CD-R/
RW, DVD+R/RW and DVD-R/RW
®
– Official DivX Ultra Certified
Notes about discs/content format
product
®
– Plays all versions of DivX video
(including DivX 6) with enhanced
playback of DivX media files and
the DivX Media Format
– This unit can play the disc types
associated with the logos shown below.
Do not attempt to load any other type
of disc into this unit. Doing so may
damage this unit.
®
®
®
– ISO 9660 Level1/Level2 for CD-R/RW
– Up to 298 folders per disc and up to
648 files per folder with up to 8
hierarchies
Notes:
– CD-R/RW, DVD+R/RW/R DL and
DVD-R/RW/R DL cannot be played
unless finalized.
– Only the first session of DVD+R/R DL
and DVD-R/RW/R DL can be played.
– Some discs cannot be played depending
on disc characteristics or recording
conditions.
– Do not use any non-standard shaped
discs (heart-shaped, etc.).
– Do not use discs with tape, seals, or
paste on their surface.
– This unit can play DVD+R/RW/R DL and
DVD-R/RW/R DL discs recorded in
DVD-Video compatible format.
– This unit can play DVD-RW discs
recorded in VR format (compatible with
CPRM).
– Do not use discs with many scratches
on their surface.
3 En
Introduction
Cleaning discs
• When a disc becomes dirty, clean it with a cleaning cloth. Wipe the disc from the center
out. Do not wipe in a circular motion.
• Do not use solvents such as benzine, thinner, commercially available cleaners, or antistatic
spray intended for analog records.
Patent information
Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic” and the double-D symbol are
trademarks of Dolby Laboratories.
”DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.
DivX, DivX Ultra Certified, and associated logos are trademarks of DivX, Inc. and are used under license.
HDMI, the HDMI logo and High Definition Multimedia Interface are trademarks or registered trademarks
of HDMI Licensing LLC.
This product incorporates copyright protection technology that is protected by method claims of certain
U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights
owners. Use of this copyright protection technology must be authorized by Macrovision Corporation,
and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision
Corporation. Reverse engineering or disassembly is prohibited.
4 En
Functional Overview
Front panel
HDMI
1
2
345
6
7 8 9
1 STANDBY/ON
5 PROGRESSIVE indicator
Lights up when this unit enters the progressive
mode.
Turns on this unit or sets it to the standby
mode.
2 Disc tray
6 Front panel display
Loads a disc in the disc tray.
Shows the current status of this unit.
3 OPEN/CLOSE (/)
7 PLAY (B)
Opens or closes the disc tray.
Starts playback.
4 HDMI indicator
8 PAUSE (;)
Lights up when an HDMI component is
connected, and signals output via the HDMI jack
of this unit.
Pauses playback.
9 STOP (9)
Stops playback.
Rear panel
HDMI
1
2
3
4
5 6 7
1 AC power cord
5 VIDEO OUT - COMPONENT (Y, PB, PR
Connect to a standard AC outlet.
jacks
Connect to the component input jacks of your
AV receiver.
2 HDMI output jack
Connect to the HDMI input jack of your HDMI
component.
6 VIDEO OUT - S VIDEO jack
Connect to the S-video input jack of your AV
receiver.
3 AUDIO OUT (L, R) jacks
Connect to the audio input jacks of your AV
receiver or stereo system.
7 VIDEO OUT - VIDEO jack
Connect to the composite video input jack of
your AV receiver.
4 DIGITAL OUT - COAXIAL jack
Connect to the coaxial input jack of your AV
receiver.
Caution: Do not touch the inner pins of the jacks on the rear panel of this unit.
Electrostatic discharge may cause permanent damage to this unit.
5 En
Functional Overview
Remote control
7 SUBTITLE
Selects the subtitle language.
8 ANGLE
Selects the DVD camera angle.
1
1
2
5
8
0
3
6
9 REPEAT
Repeats the chapter, track, title or disc.
Shuffles the chapter or track.
4
q
7
9
TOP MENU RETURN
ON SCREEN
0 A-B
w
e
2
3
Repeats a specific segment.
MENU
SETUP
q Numeric buttons (0-9)
Selects numbered items in the currently
displayed menu.
ENTER
OK
4
r
t
y
5
6
STOP
PLAY
PAUSE
w ON SCREEN
Accesses or exits from the on-screen
display (OSD) menu of this unit.
SUBTITLE ANGLE ZOOM AUDIO
7
8
9
0
u
i
o
p
REPEAT
A
B
SCAN MUTE
e SETUP
DVD13
Accesses or exits from the setup menu
of this unit.
r T
Searches forward.*
Moves to the next chapter or track.
t PLAY (B)
Starts playback.
1
y PAUSE (;)
Turns on this unit or sets it to the
standby mode.
Pauses playback temporarily.
Frame-by-frame playback.
2 TOP MENU/RETURN
u AUDIO
Displays the top-level disc (DVD).
Moves back to the previous menu (DVD*/
VCD).
Selects the audio language or format.
i ZOOM
Enlarges the video image.
3 MENU
Accesses the menu of a disc (DVD).
Switches PBC on or off (VCD).
o MUTE
Mutes the audio output. Press again to restore
the audio output to previous volume level.
4 1/ 2/3/4
Selects an item in the currently displayed
menu. Search or slow playback.
p SCAN
Previews the content of a track or whole disc
(VCD).
ENTER/OK
Plays the first 6 seconds or less of each track
(CD).
Confirms the menu selection.
5 S
Searches backward.*
Moves to the previous chapter or track.
* Press and hold the button for about two
seconds.
6 STOP (9)
Stops playback.
Opens the disc tray.*
6 En
Connections
You need to set “DIGITAL OUTPUT” to
“ALL” (see “DIGITAL OUTPUT” on
page 25).
General notes on connections
Be sure to turn off this unit and unplug the
power supply cable, before you make or
change connections.
Notes:
– If the audio format of the digital output
does not match the capabilities of your
receiver, the receiver produces a distorted
sound or no sound at all. Make sure to
select the appropriate audio format from
the menu screen on the disc.
Pressing AUDIO on the remote control once
or more may change not only the audio
languages but also the audio format. The
selected format appears in the front panel
display for several seconds.
• Depending on the equipment you wish
to connect, there are various ways to
makeconnections. Possibleconnections
are described below.
• Refer to the manuals of your other
components as necessary to make the
best connections.
• Do not connect this unit via your VCR.
The video quality could be distorted by
the copy protection system.
• Do not connect the audio out jack of
this unit to the phono in jack of your
audio system.
– If you wish to enjoy Dolby Digital, DTS and
MPEG formats, you must connect this unit
to an AV receiver that supports these
formats.
Audio connections
Digital connection
This unit has a coaxial digital out jack.
Connect DIGITAL OUT - COAXIAL jack
of this unit to your AV receiver equipped
with Dolby Digital, DTS, or MPEG
decoder using a commercially available
coaxial cable.
Analog connection
This unit has analog output jacks.
Connect AUDIO OUT (L, R) jacks of this
unit to the corresponding input jacks of
your audio component (such as a stereo
amplifier) using the supplied audio pin
cable.
This unit
L
R
Audio pin cable
This unit
C
L
R
AV receiver
Stereo
amplifier
COAXIAL
IN
CD/DVD
L
R
Subwoofer
Center
speaker
Right
speaker
Left
speaker
Left front
speaker
Rightfront
speaker
Right surround
speaker
Leftsurround
speaker
Surround
back speaker
7 En
Connections
Video connections
Component video jacks <A>
If your AV receiver has video output jacks,
connect your receiver and then your TV
so that you can use one TV for several
different video sources (LD, VCR, etc.) by
simply switching the input source selector
of your receiver.
This unit has four types of video output
jacks. Use the one that corresponds to the
input jacks of the component to be
connected.
Component video connections achieve
high fidelity color reproduction than S-
video connections by transmitting video
signals on separate wires for luminance (Y:
green) and chrominance (PB: blue, PR: red).
Connect VIDEO OUT - COMPONENT
(Y, PB, PR jacks of this unit to component
input jacks of your AV receiver and then to
those of your TV using a commercially
available component cable. Observe the
color of each jack when you make
connections.
If your receiver does not have component
output jacks, you can achieve a better
video image by connecting the component
output jacks of this unit directly to the
component input jacks of your TV.
This unit
PR
PB
Y
Video pin cable
<A>
<B>
<C>
V
PR
PB
Y
S-video jack <B>
S
S-video connections achieve a clearer
picture than composite video connections
by transmitting video signals on separate
wires for luminance (Y) and chrominance
(C).
PR
PB
Y
COMPONENT
VIDEO IN
S VIDEO
INPUT
VIDEO
INPUT
AV receiver
VIDEO
COMPONENT S VIDEO
Connect VIDEO OUT - S VIDEO jack of
this unit to S-video input jack of your AV
receiver and then to that of your TV using
a commercially available S-video cable.
OUT
VIDEO OUT OUT
VIDEO
IN
COMPONENT S VIDEO
VIDEO IN
IN
TV
Composite video jack <C>
Connect VIDEO OUT - VIDEO jack of this
unit to video input jack of your AV
receiver and then to that of your TV using
the supplied video pin cable.
8 En
Connections
Notes:
HDMI connections
HDMI jack
Connect the HDMI output jack of this unit
to an HDMI input jack of your TV using a
commercially available HDMI cable.
– You need to make an appropriate audio
connections if the connected component
does not output audio signals (see “Audio
connections” on page 7).
– This unit is not compatible with HDCP-
incompatible HDMI or DVI components.
– You need a commercially available HDMI/
DVI conversion cable when you connect this
unit to other DVI components. In this case,
the HDMI jack of this unit does not output
any audio signals.
– Depending on the connected DVI
component, black and white in the image
may not be distinct. In that case, adjust the
picture setting of the connected DVI
component.
HDMI
This unit
HDMI cable
– When connecting an HDMI component,
refer to the instruction manual for the
component.
– Do not disconnect or turn off the power of
the HDMI/DVI component connected to
the HDMI jack of this unit while data is
being transferred. Doing so may disrupt
playback or cause noise.
HDMI IN
TV
You need to set “HDMI AUDIO” (see
page 26) and “HDMI VIDEO” (see page 30).
9 En
Getting Started
Step 1: Inserting batteries into
the remote control
Using the remote control
3
Remote control
sensor
1
2
Point the remote control at
the remote control sensor,
within approximately 6 m
(20 feet) from this unit.
1 Open the battery compartment.
2 Insert the two supplied batteries (AA, R06,
UM-3) following the indications (+/–)
inside the compartment.
3 Close the cover.
Notes:
– Insert batteries correctly according to the
polarity markings (+/–). The batteries
inserted in the opposite direction may leak.
– Replace the exhausted batteries
immediately with new ones to prevent a
leakage.
– Remove the batteries from the
compartment if the remote control is not
used for more than a month.
– If the batteries have leaked, dispose of
them immediately. Avoid touching the
leaked material or letting it come into
contact with clothing, etc. Clean the battery
compartment thoroughly before installing
new batteries.
Handling the remote control
• Do not spill water or other liquids on
the remote control.
• Do not drop the remote control.
• Do not leave or store the remote
control in the following types of
conditions:
– places of high humidity, such as near a
bath
– places of high temperature, such as near
a heater or stove
– places of extremely low temperature
– dusty places
– Do not use old batteries together with new
ones.
– Do not use different types of batteries (such
as alkaline and manganese batteries)
together. Read the packaging carefully as
these different types of batteries may have
the same shape and color.
– Dispose of the batteries correctly in
accordance with your local regulations.
10 En
Getting Started
3 Press 3/4to highlight [TV TYPE], and
then press 2.
Step 2: Turning on the power
1 Connect the AC power cord to the power
4 Press 3/4to highlight one of the following
outlet.
options.
2 Turn on your TV and AV receiver.
PAL
Select this if the connected TV is a PAL
system TV. It will change the video signals
of NTSC discs and output them in PAL
format.
3 Select the appropriate input source of the
AV receiver connected to this unit. Refer
to the manual supplied with your AV
receiver for details.
NTSC
4 Turn on this unit.
Select this if the connected TV is an NTSC
system TV. It will change the video signals
of PAL discs and output them in NTSC
format.
5 Set the TV to the correct Video IN channel
(e.g. EXT1, EXT2, AV1, AV2, AUDIO/
VIDEO, etc. Refer to the manual supplied
with your TV for details).
➜ The front panel display lights up and the
MULTI
default screen appears on the TV.
Select this if the connected TV is
compatible with both NTSC and PAL
formats (such as a multi-system TV).
The output format will be in accordance
with the video signals of the disc.
Step 3: Setting a TV type and
display
5 Select an item, and then press
ENTER/OK to confirm your selection.
Setting a color system for your
TV
Notes:
– Before changing the current TV standard
setting, ensure that your TV supports the
selected TV type.
This unit is compatible with both NTSC
and PAL video formats. Select the color
system that matches your TV.
– If the picture is not displayed properly on
your TV, wait for 15 seconds for this unit to
activate automatic recovery.
VIDEO SETUP PAGE
– When making HDMI connections, you
cannot change or select [TV TYPE].
TV TYPE
PAL
TV DISPLAY
NTSC
MULTI
PROGRESSIVE
PICTURE SETTING
BLACK LEVEL
CLOSED CAPTION
HDMI SETUP
CHANGING NTSC TO PAL:
1. ENSURE THAT YOUR TV SUPPORTS
PAL STANDARD.
2. IF THERE IS
DISPLAYED ON THE TV, WAIT 15
SECONDS FOR AUTO RECOVER.
A
DISTORTED PICTURE
1 Press SETUP.
2 Press 2repeatedly to select “VIDEO
SETUP PAGE”.
OK
CANCEL
TIPS: To return to the previous menu, press 1.
To exit from the menu, press SETUP.
11 En
Getting Started
Setting an aspect ratio for your
TV
Step 4: Setting a language
preference
You can set the aspect ratio of this unit to
match your TV. If the aspect ratio of your
TV is 4:3, you do not need to change this
setting. If you have a widescreen TV,
change this setting according to the
following procedure.
You can select your own preferred
language settings.This unit automatically
switches to your preferred language
whenever you load a disc. If the selected
language is not available on the disc, the
default language of the disc will be used
instead. The OSD language in the system
menu remains once selected.
For details, see “Setting the TV display” on
page 27.
Setting the OSD Language
VIDEO SETUP PAGE
TV TYPE
TV DISPLAY
4:3 PAN SCAN
4:3 LETTER BOX
16:9
PROGRESSIVE
PICTURE SETTING
BLACK LEVEL
CLOSED CAPTION
HDMI SETUP
GENERAL SETUP PAGE
DISC LOCK
DISPLAY DIM
PROGRAM
OSD LANGUAGE
SCREEN SAVER
SLEEP
ENGLISH
ESPAÑOL
FRANÇAIS
1 Press SETUP.
AUTO STANDBY
DIVX(R) VOD CODE
2 Press 2repeatedly to select “VIDEO
SETUP PAGE”.
1 Press SETUP.
3 Press 3/4to highlight [TV DISPLAY], and
then press 2.
2 Press 1/ 2to select “GENERAL SETUP
PAGE”.
4 Press 3/4to highlight [16:9], and then
press ENTER/OK to confirm the
selection.
3 Press 3/4to highlight [OSD
LANGUAGE], and then press 2.
4 Press 3/4to select a language, and then
press ENTER/OK to confirm your
selection.
TIPS: To return to the previous menu, press 1.
To exit from the menu, press SETUP.
12 En
Getting Started
Setting the audio, subtitle and
disc menu languages
(DVD-Video only)
PREFERENCE PAGE
AUDIO
ENGLISH
SUBTITLE
CHINESE (SIMP)
FRENCH
DISC MENU
PARENTAL
VR LIST
SPANISH
PORTUGUESE
POLISH
MP3/JPEG NAV
DIVX SUBTITLE
PASSWORD
ITALIAN
TURKISH
1 Press STOP (9) twice, and then press
SETUP.
2 Press 2repeatedly to select
“PREFERENCE PAGE”.
3 Press 3/4to highlight one of the options
below at a time, and then press 2.
– AUDIO (audio language)
– SUBTITLE (subtitle language)
– DISC MENU (disc menu language)
4 Press 3/4to select a language, and then
press ENTER/OK to confirm your
selection.
If the language you want is not in the
list, select [OTHERS],
and then use the numeric buttons (0-9)
on the remote control to enter the 4-digit
language code (see “Language Codes” on
page 36), and then press ENTER/OK to
confirm the code.
5 Repeat steps 3–4 for other language
settings.
TIPS: To return to the previous menu, press 1.
To exit from the menu, press SETUP.
13 En
Disc Operation
IMPORTANT!
Pausing playback
– If the inhibition icon ( ) appears
on the TV screen when a button is
pressed, the function for that
button is not available on the
current disc or at the current time.
– Depending on the DVD or VIDEO
CD disc, some operations may
operate differently or be
1 During playback, press PAUSE (;).
➜ Playback is paused and the sound is
muted.
2 Press PAUSE (;) again to select the next
picture frame.
3 To resume normal playback, press
PLAY (B).
restricted.
– Do not push on the disc tray or put
any objects other than discs on the
disc tray. Doing so may cause this
unit to malfunction.
Selecting track/chapter
• Press S/ Tor use the numeric
buttons (0-9) to select a track/chapter
number.
• During repeated playback, press S/
Tto replay the same track/chapter.
Basic playback
1 Press STANDBY/ON on the front panel
or
this unit.
on the remote control to turn on
Searching backward/forward
1 Press and hold S/ Tor press 1/ 2.
2 Press OPEN/CLOSE (/) on the front
2 While searching, press S/ Tor
1/ 2repeatedly to select the desired
speed.
panel to open the disc tray.
3 Place the disc in the disc tray with the
printed side up.
3 To resume normal playback, press
PLAY (B).
4 Press OPEN/CLOSE (/) again to close
the disc tray.
Notes:
➜ After recognizing the disc, this unit
begins to play back automatically.
• If you press PLAY (B) when the disc
tray is open, the disc tray closes and
playback starts automatically.
– 1/ 2key may not be available with some
discs.
– For MP3 and WMA, the search function
allows you to search the track currently
being played.
General operation
Stopping playback
• Press STOP (9).
Unless stated otherwise, all operations
described here are carried out using the
supplied remote control.
TIPS: The operating features described here might not be possible for certain discs.
Always refer to the instructions supplied with the disc.
14 En
Disc Operation
Selecting the various repeat/
shuffle functions
Operations for video playback
(DVD/VCD/SVCD)
Repeat and shuffle
Using the disc menu
• Each time you press REPEAT during
playback, the front panel display changes
as follows:
Depending on the disc, a menu may appear
on the TV screen once you load the disc.
To select a playback feature or item
DVD
• Use 1/2/3/4or the numeric buttons
(0-9), and then press ENTER/OK to
start playback.
➔ RPT ONE (repeat chapter)
➔ RPT TT (repeat title)
➔ RPT ALL (repeat disc)
➔ SHUFFLE (shuffle)
➔ RPT SHF (shuffle repeat)
➔ RPT OFF (repeat off)
To access or exit from the menu
• Press MENU.
VCD/SVCD/CD
Slow motion
You can play back in slow motion.
➔ RPT ONE (repeat track)
➔ RPT ALL (repeat disc)
➔ SHUFFLE (shuffle)
➔ RPT SHF (shuffle repeat)
➔ RPT OFF (repeat off)
1 Press 3for reverse slow motion or 4for
forward slow motion.
2 During slow motion, press 3/4
MP3/WMA/DivX
repeatedly to select the desired speed.
➔ RPT ONE (repeat track)
➔ RPT FLD (repeat folder)
➔ SHUFFLE (shuffle)
3 To resume normal playback, press
PLAY (B).
➔ RPT OFF (repeat off)
Note:
Note:
– Reverse slow motion is not available for
VCDs and SVCDs.
– For VCD, repeat playback is not possible
when the PBC mode is selected.
Repeating a section within a
chapter/track
1 While playing a disc, press A-B at the
desired starting point.
2 Press A-B again at the desired end point.
• A and B can only be set within the same
chapter/track.
➜ The selected section repeats
continuously.
3 To exit from the sequence, press A-B.
TIPS: The operating features described here might not be possible for certain discs.
Always refer to the instructions supplied with the disc.
15 En
Disc Operation
Zooming in
On-screen display (OSD)
This function allows you to enlarge or
lessen the picture on the TV screen and to
pan through the enlarged picture.
The OSD menu shows disc playback
information (e.g., the title or chapter
number, elapsed playing time or audio/
subtitle language). A number of operations
are possible without interrupting disc
playback.
1 During playback, press ZOOM repeatedly
to display the picture at different scales.
• Use 1/ 2/3/4 to pan through the
enlarged picture.
1 During playback, press ON SCREEN.
➜ A list of available disc information
appears on the TV screen.
➜ Playback continues.
2 Press ZOOM repeatedly to return to the
original size.
DVD
MENU
Resuming playback from the last
stopped point
You can resume playback of the last 10
discs, even if the discs were ejected or the
power of this unit was turned off.
TITLE
02/14
02/14
5.1CH
ENG
CHAPTER
AUDIO
SUBTITLE
BITRATE 16
TITLE ELAPSED 0:02:25
VCD/SVCD
1 Load one of the last 10 discs.
➜ “LOADING” appears on the TV screen.
MENU
2 Press PLAY (B) while “LOADING” is
displayed on the TV screen.
TRACK
02/14
DISC TIME
TRACK TIME
REPEAT
0:49:17
0:03:43
OFF
➜ “RESUME PLAY” appears on the TV
screen and the disc is played back from
the last point.
BITRATE 16
TOTAL ELAPSED 0:02:25
2 Press 3/4to view the information, and
then press ENTER/OK to access the
selected item.
To cancel the resume mode
• When playback is stopped, press
STOP (9) again.
3 Use the numeric buttons (0-9) to input
the number/time or press 3/4to make a
selection, and then press ENTER/OK to
confirm the selection.
➜ Playback changes to the selected time
or to the selected title/chapter/track.
TIPS: The operating features described here might not be possible for certain discs.
Always refer to the instructions supplied with the disc.
16 En
Disc Operation
Title/Chapter/Track selection
(DVD/VCD)
Repeat/Time Display (DVD/VCD)
1 Press 3/4to select [REPEAT] or [TIME
1 Press 3/4to select [TITLE] or
DISP.].
[CHAPTER] (DVD) or [TRACK] (VCD).
2 Press ENTER/OK to confirm the
2 Press ENTER/OK to confirm the
selection.
selection.
3 Press 3/4to highlight your selection, and
then press ENTER/OK.
3 Select a title, chapter or track number
using the numeric buttons (0-9).
Time display (CD)
Time search (DVD/VCD)
Each time you press ON SCREEN, the
time display changes as follows:
1 Press 3/4to select [TT TIME] or [CH
TIME] (DVD) or [TRACK TIME] or [DISC
TIME] (VCD).
TOTAL ELAPSED
SINGLE REMAIN
TOTAL REMAIN
SINGLE ELAPSED
• [TT TIME] refers to the total time of the
current title, and [CH TIME] refers to
the total time of the current chapter.
2 Press ENTER/OK to confirm the
Special DVD features
Playing by title
selection.
3 Enter hours, minutes and seconds from left
to right using the numeric buttons (0-9)
(e.g. 0:34:27).
1 Press MENU.
➜ The disc title menu appears on the TV
screen.
Audio/Subtitle/Angle (DVD)
You can change [AUDIO], [SUBTITLE] or
[ANGLE] if these functions are available on 2 Use 1/ 2/3/4 or the numeric buttons
the disc you are playing.
(0-9) to select a playback option.
1 Press 3/4to select [AUDIO],
3 Press ENTER/OK to confirm your
[SUBTITLE] or [ANGLE].
selection.
2 Press ENTER/OK to confirm the
selection.
Camera angle
3 For Audio and Subtitle:
Press 3/4to highlight your selection, and
then press ENTER/OK.
OR
• Press ANGLE repeatedly to select the
desired angle.
For Angle:
Select an angle using the numeric
buttons (0-9).
TIPS: The operating features described here might not be possible for certain discs.
Always refer to the instructions supplied with the disc.
17 En
Disc Operation
Audio
Preview function
1 Press SCAN.
Changing the audio language and/or
format
➜ A list appears on the TV screen.
• Press AUDIO repeatedly to select an
audio language.
SELECT DIGEST TYPE:
TRACK DIGEST
DISC INTERVAL
TRACK INTERVAL
Subtitles
• Press SUBTITLE repeatedly to select
a subtitle language.
2
Press 3/4to highlight [TRACK DIGEST],
[DISC INTERVAL] or [TRACK INTERVAL].
Special VCD/SVCD features
TRACK DIGEST
This function minimizes the picture for
every track and displays six at a time on the
screen to help you view the tracks on the
disc.
Playback control (PBC)
For VCD with playback control
(PBC) feature (version 2.0 only)
Press MENU to toggle between “PBC
ON” and “PBC OFF”.
➜ If you select “PBC ON”, the disc menu
(if available) appears on the TV screen.
• Use S/ Tor the numeric
buttons (0-9) to select a playback
option.
DISC INTERVAL
This function is used to divide a disc into
six parts at regular intervals, and display
them on one page to help you preview the
entire disc.
TRACK INTERVAL
This function is used to divide a single track
into six parts at regular intervals, and
display them on one page to help you
preview the selected track.
• During playback, press TOP
MENU/RETURN to return to the
menu screen.
Note:
If you want to skip the index menu
and play back a disc directly from the
beginning,
– You can only select [TRACK INTERVAL]
during playback when PBC is turned off.
• Press MENU on the remote control to
turn off PBC.
TIPS: The operating features described here might not be possible for certain discs.
Always refer to the instructions supplied with the disc.
18 En
Disc Operation
3 Press ENTER/OK.
➜ Thumbnail pictures appear on the TV
screen.
Playing data discs (MP3/WMA/
JPEG/DivX)
General operation
1 Load a disc.
• The disc reading time may exceed 30
seconds due to the complexity of the
directory/file configuration.
➜ The data disc menu appears on the TV
screen.
TYPE:TITLE
SELECT(01-06):- -
EXIT
MENU
NEXT
00:00 00:00
001/020
(Example of 6 thumbnails in the display)
4 Use 1/ 2/3/4 to select a track or use the
numeric buttons (0-9) to input the
selected track number.
Favorite
MP3
Piano
Cello
MP3
5 Press S/ Tto open the previous or
MP3
MP3
Jazz
Live
next page.
6 Press ENTER/OK to confirm the
selection.
To quit the preview function
• Use 1/ 2/3/4 to highlight [EXIT] and
press ENTER/OK.
2 Playback starts automatically. If not, press
PLAY (B).
During playback, you can:
• Press S/ Tto select another
track/file in the current folder.
To return to the preview menu
• Use 1/ 2/3/4to highlight [MENU] and
press ENTER/OK.
• Press PAUSE (;) to pause playback.
For CD:
Note:
• When playback is stopped, press SCAN.
➜ Each track is played for a few seconds.
– It may not be possible to play certain MP3/
WMA/JPEG/DivX discs due to the
configuration and characteristics of the
discs or the recording conditions.
TIPS: The operating features described here might not be possible for certain discs.
Always refer to the instructions supplied with the disc.
19 En
Disc Operation
Selecting a folder and track/file
Preview function
This function displays the content of the
current folder or the entire disc.
1 Press 3/4to select a folder, and then
press ENTER/OK to open the folder.
1 Press STOP (9) during playback.
➜ 12 thumbnail pictures appear on the TV
screen.
2 Press 3/4to select a track/file.
3 Press ENTER/OK to confirm your
selection.
➜ Playback starts from the selected file to
the end of the folder.
Repeat and shuffle
When the MP3 disc/WMA disc/picture
disc menu is shown on the screen;
• Press REPEAT repeatedly to select a
“Play Mode”.
➜ FOLDER: files are played back once.
➜ REPEAT ONE: one file is played
repeatedly.
➜ REPEAT FOLDER: all files in one folder
are played repeatedly.
2 Press S/ Tto display the other
pictures on the previous/next page.
3 Use 1/ 2/3/4 to highlight one of the
pictures, and then press ENTER/OK to
start playback.
➜ SHUFFLE: all files in the current folder
are played in random order.
OR
Move the cursor to highlight
on the
bottom of the page to start playback from
the first picture on the current page.
Special picture disc features
1 Load a picture disc (JPEG, Kodak Picture
CD and Fujicolor CD).
For JPEG discs:
➜ For JPEG discs, the picture menu
appears on the TV screen.
4 Press MENU to return to JPEG disc
menu.
➜ For Kodak Picture CDs and Fujicolor
CDs, the slideshow begins.
Zooming pictures
2 Press PLAY (B) to start the slideshow.
1 During playback, press ZOOM repeatedly
to display the picture at different scales.
2 Use 1/ 2/3/4to view the zoomed picture.
TIPS: The operating features described here might not be possible for certain discs.
Always refer to the instructions supplied with the disc.
20 En
Disc Operation
Playback with multi-angles
Special DivX features
• During playback, press 1/ 2/3/4 to
rotate the picture on the TV screen.
1: rotates the picture counter-clockwise
2: rotates the picture clockwise
3: flips the picture vertically
DivX files including DMF (DivX
Media Format) features only
Interactive menu
4: flips the picture horizontally
1 Load a disc.
➜ The interactive menu appears on the TV
screen.
Scan effect
• Press ANGLE repeatedly to choose a
scan effect.
➜ Various scan effects appear in the top
2 Use 1/ 2/3/4 to select a chapter.
3 Press ENTER/OK or PLAY (B) to start
playback of the selected chapter.
left corner of the TV screen.
To access the interactive menu
• During playback, press MENU.
Playing MP3 music and JPEG
picture simultaneously
To return to the data disc menu
screen
• When the interactive menu is displayed,
1 Load a disc that contains both MP3 music
and JPEG picture data.
press STOP (9).
➜ The disc menu appears on the TV
screen.
Multiple audio and subtitle
languages
2 Select an MP3 music track.
3 During MP3 music playback, select a JPEG
picture file from the TV screen, and then
press PLAY (B).
To select an audio language
• During playback, press AUDIO to
switch the audio language recorded on
the contents.
➜ The picture files are played back one
after another until the end of the folder.
4 To quit simultaneous playback, press
MENU, and then press STOP (9).
To select a subtitle language
• During playback, press SUBTITLE to
switch or turn on/off the subtitle
Note:
– Some files cannot be played correctly
depending on disc characteristics or
recording conditions.
language recorded on the contents.
Note:
– For information about external subtitle files,
see “Displaying DivX external subtitle files”
on page 34.
TIPS: The operating features described here might not be possible for certain discs.
Always refer to the instructions supplied with the disc.
21 En
Setup Menu
Setup is carried out on the TV screen,
enabling you to customize this unit to suit
your own particular requirements.
UNLOCK
Select this to unlock the disc and allow
future playback.
2 Press 3/4to select a setting, and then
press ENTER/OK to confirm your
selection.
General setup menu
1 Press SETUP
2 Press 1/ 2to select “GENERAL SETUP
PAGE”.
Dimming the front panel display
You can select different levels of
brightness for the front panel display.
3 Press ENTER/OK to confirm your
selection.
1 In “GENERAL SETUP PAGE”, press 3/4
to highlight [DISPLAY DIM], and then
press 2.
GENERAL SETUP PAGE
DISC LOCK
DISPLAY DIM
PROGRAM
100%
Select this for full brightness.
OSD LANGUAGE
SCREEN SAVER
SLEEP
70%
Select this for medium brightness.
AUTO STANDBY
DIVX(R) VOD CODE
40%
Select this for dimming display.
2 Press 3/4to select a setting, and then
press ENTER/OK to confirm your
selection.
Locking/Unlocking the disc for
viewing
Not all discs are rated or coded by the
manufacturer of the disc. You can prevent
playback of a specific disc by locking the
disc. You can lock up to 40 discs on this
unit.
Programming disc tracks
(except MP3/WMA/JPEG/DivX)
You can play back the contents of a disc in
the desired order by programming the
tracks to be played. You can store up to 20
tracks per disc with a maximum of 10
discs.
1 In “GENERAL SETUP PAGE”, press 3/4
to highlight [DISC LOCK], and then
press 2.
LOCK
1 In “GENERAL SETUP PAGE”, press 3/4
to highlight [PROGRAM], and then press 2
to select [INPUT MENU].
Select this to lock playback of the current
disc. Subsequent access to a locked disc
requires six-digit password.
2 Press ENTER/OK to confirm your
selection.
The default password is “000 000” (see
“Changing the password” on page 35).
➜ The input menu appears on the TV
screen.
TIPS: To return to the previous menu, press 1.
To exit from the menu, press SETUP.
22 En
Setup Menu
PROGRAM: TRACK (01-17)
OSD language
This menu contains various options for the
on-screen display (OSD) language. For
details, see “Setting the OSD Language” on
page 12.
6
7
8
9
_ _
_ _
_ _
_ _
1
2
3
4
5
04
10
_ _
_ _
_ _
10 _ _
START
EXIT
NEXT
Screen saver
To input your favorite tracks/chapters
This function is used to turn on or off the
screen saver.
3 Use the numeric buttons (0-9) to enter
a valid track/chapter number.
1 In “GENERAL SETUP PAGE”, press 3/4
to highlight [SCREEN SAVER], and then
press 2.
4 Use 1/ 2/3/4 to move the cursor to the
next position.
• If the track/chapter number is more
than ten, press Tto move to the
next page, and then proceed with
programming.
ON
Select this if you wish to turn off the TV
screen when disc playback is stopped or
paused for more than 15 minutes.
OR
• Use 1/ 2/3/4 to highlight [NEXT] on
the program menu, and then press
ENTER/OK.
OFF
Select this to disable the screen saver
function.
5 Repeat steps 3–4 to input another track/
2 Press 3/4to select a setting, and then
press ENTER/OK to confirm your
selection.
chapter number.
To remove a track
6 Use 1/ 2/3/4 to move the cursor to the
track you want to remove.
Sleep timer
This feature automatically sets this unit to
the standby mode after a certain elapsed
period.
7 Press ENTER/OK to remove this track
from the program menu.
To start program playback
1 In “GENERAL SETUP PAGE”, press 3/4
to highlight [SLEEP], and then press 2.
8 Use 1/ 2/3/4to highlight [START] on the
program menu, and then press
ENTER/OK.
2 Press 3/4to select a setting.
• You can select from 30, 60, 90, 120 and
150 minutes. Select [OFF] to cancel the
sleep timer function.
➜ Playback starts for the selected tracks in
the programmed sequence.
To exit from program playback
3 Press ENTER/OK to confirm your
9 Use 1/ 2/3/4 to highlight [EXIT] on the
program menu, and then press
ENTER/OK.
selection.
TIPS: To return to the previous menu, press 1.
To exit from the menu, press SETUP.
23 En
Setup Menu
Notes:
®
– All the downloaded videos from DivX
Auto standby
VOD can only be played back on this unit.
– Time search feature is not available during
DivX movie playback.
This function is used to turn the auto
standby mode on or off when disc playback
is stopped for more than 30 minutes.
1 In “GENERAL SETUP PAGE”, press 3/4
to highlight [AUTO STANDBY], and then
press 2.
Audio setup menu
1 Press SETUP.
ON
2 Press 1/ 2to select “AUDIO SETUP
Select this if you wish to set this unit to the
standby mode automatically when disc
playback is stopped or paused for more
than 30 minutes.
PAGE”.
3 Press ENTER/OK to confirm your
selection.
OFF
Select this to disable the auto standby
function.
AUDIO SETUP PAGE
ANALOG OUTPUT
DIGITAL AUDIO
HDMI AUDIO
2 Press 3/4to select a setting, and then
press ENTER/OK to confirm your
selection.
CD UPSAMPLING
NIGHT MODE
LIP SYNC
®
DivX VOD registration code
®
Yamaha provides you with a DivX VOD
(Video On Demand) registration code that
allows you to rent and purchase videos
using the DivX VOD service.
For more information, visit at
Setting the analog output
Set the analog output to match the
playback capability of this unit.
®
1 In “AUDIO SETUP PAGE”, press 3/4to
highlight [ANALOG OUTPUT], and then
press 2.
1 In “GENERAL SETUP PAGE”, press 3/4
to highlight [DIVX(R) VOD CODE], and
then press 2.
STEREO
➜ The registration code appears.
Select this to change channel output to
stereo, which only delivers sound from the
two front speakers.
2 Press ENTER/OK to exit.
3 Use the registration code to purchase or
®
rent the videos from DivX VOD service
LT/RT
instructions and download the video onto
a CD-R for playback on this unit.
Select this if this unit is connected to a
Dolby Pro Logic decoder.
TIPS: To return to the previous menu, press 1.
To exit from the menu, press SETUP.
24 En
Setup Menu
VIRTUAL SURR
LPCM OUTPUT
Select this to virtually reproduce the
surround channels.
Select this if you have connected this unit
to a PCM-compatible receiver via a digital
terminal, such as the coaxial terminal. In
this case, you may need to adjust “LPCM
OUTPUT”.
Discs are recorded at a certain sampling
rate. The higher the sampling rate, the
better the sound quality.
2 Press 3/4to select a setting, and then
press ENTER/OK to confirm your
selection.
Setting the digital output
The [DIGITAL AUDIO] options are:
“DIGITAL OUTPUT” and “LPCM
OUTPUT”.
48KHz
Select this to play back discs recorded at
the sampling rate of 48 kHz. All 96 kHz
PCM data streams (if available) are
1 In “AUDIO SETUP PAGE”, press 3/4to
highlight [DIGITAL AUDIO], and then
press 2.
converted to the sampling rate of 48 kHz.
96KHz
2 Press 3/4to highlight an option.
3 Press 2to enter a submenu.
Select this to play back discs recorded at
the sampling rate of 96 kHz. If the 96 kHz
disc is copy protected, the digital output is
automatically converted to the sampling
rate of 48 kHz.
DIGITAL OUTPUT
Set the digital output according to your
optional audio component connections.
4 Press 3/4to select a setting, and then
press ENTER/OK to confirm your
selection.
OFF
Select this to turn off the digital output.
ALL
Select this if you have connected the digital
audio output jack to a multi-channel
decoder/receiver.
PCM ONLY
Select this only if your receiver is not
capable of decoding multi-channel audio
signals.
TIPS: To return to the previous menu, press 1.
To exit from the menu, press SETUP.
25 En
Setup Menu
Setting the HDMI audio
CD upsampling
When you connect this unit to an HDMI
compatible component via the HDMI jack,
select to turn on or off the HDMI audio
output.
This feature allows you to convert your
music CD to a higher sampling rate using
sophisticated digital signal processing for
better sound quality. If you activate the
upsampling function, this unit automatically
switches to the stereo mode.
1 In ‘AUDIO SETUP PAGE’, press 34to
highlight [HDMI AUDIO], then press 2.
1 In “AUDIO SETUP PAGE”, press 3/4to
highlight [CD UPSAMPLING], and then
press 2.
ON
Select this to turn on the HDMI audio
output.
OFF
OFF
Select this to disable CD-upsampling.
Select this to turn off the HDMI audio
output.
88.2kHz (X2)
Select this to convert the sampling rate of
CDs to twice that of the original.
Notes:
– If you are not using the HDMI audio
output, you should set this to [OFF].
– If the monitor/receiver connected to this
unit using HDMI does not support HDMI
audio signal input, set this to [OFF].
– This unit can output following audio signals
using HDMI: 32/44.1/48 kHz, 2ch linear
PCM signals and bitstream signals (Dolby
Digital, DTS and MPEG).
– When audio signals are being output by
HDMI-compatible components, digital
output signals are muted.
– When [DIGITAL OUTPUT] is set to [OFF]
on this unit, HDMI audio is muted even if
[HDMI AUDIO] is set to [ON] and an
HDMI connection is established between
the monitor and receiver.
176.4kHz (X4)
Select this to convert the sampling rate of
CDs to four times that of the original.
2 Press 3/4to select a setting, and then
press ENTER/OK to confirm your
selection.
Note:
– This setting is only valid for the signals
output at the analog jacks.
Night mode
In the night mode, high volume output is
softened and low volume output is brought
upward to an audible level. It is useful when
you watch your favorite action movie
without disturbing others at night.
– When [DIGITAL OUTPUT] is set to [ALL]
on this unit, PCM signals are still output if
the monitor and receiver only support the
PCM format. However, the audio output is
muted when audio format plays back the
DTS source.
1 In “AUDIO SETUP PAGE”, press 3/4
to highlight [NIGHT MODE], and then
press 2.
TIPS: To return to the previous menu, press 1.
To exit from the menu, press SETUP.
26 En
Setup Menu
ON
TV type
Select this to level out the volume. This
feature is only available for movies with the
Dolby Digital mode.
This menu contains the options for
selecting the color system that matches
your TV. For details, see “Step 3: Setting a
TV type and display” on page 11.
OFF
Select this when you want to enjoy the full
dynamic range of surround sound.
Setting the TV display
2 Press 3/4to select a setting, and then
press ENTER/OK to confirm your
selection.
Set the aspect ratio of this unit to match
your TV. The format you select must be
available on the disc. Otherwise, the TV
display setting will not affect the picture
during playback.
Lip synchronization
This feature allows you to delay the sound
output in order to synchronize it with the
video image. This may be necessary when
you use certain LCD monitors or
projectors.
1 In “VIDEO SETUP PAGE”, press 3/4to
highlight [TV DISPLAY], and then press 2.
2 Press 3/4to highlight one of the following
options.
4:3 PAN SCAN
1 In “AUDIO SETUP PAGE”, press 1/ 2to
highlight [LIP SYNC], and then press 2.
Select this if the aspect ratio of your TV is
4:3 and you want both sides of the picture
to be trimmed or formatted to fit your TV
screen.
2 Press 1/ 2to adjust the delay time
(between 00 ms and 200 ms), and then
press ENTER/OK to confirm your
selection.
4:3 LETTER BOX
Select this if the aspect ratio of your TV is
4:3. In this case, a wide picture with black
bands on the upper and lower portions of
the TV screen are displayed.
Video setup menu
1 Press SETUP.
16:9
2
Press 1/2to select “VIDEO SETUP PAGE”.
Select this if you have a widescreen TV.
3 Press ENTER/OK to confirm your
selection.
VIDEO SETUP PAGE
TV TYPE
TV DISPLAY
PROGRESSIVE
PICTURE SETTING
BLACK LEVEL
CLOSED CAPTION
HDMI SETUP
TIPS: To return to the previous menu, press 1.
To exit from the menu, press SETUP.
27 En
Setup Menu
3 Select an item, and then press
Progressive
ENTER/OK to confirm your selection.
This feature is only valid if you have
connected this unit to a progressive scan
TV through the component video jacks
(see “Component video jacks <A>” on
page 8).
The relationship between the setting of
this unit and the TV display
When the aspect ratio of your TV is 4:3:
Playback
disc
TV display
Setting
1 In “VIDEO SETUP PAGE”, press 3/4
to highlight [PROGRESSIVE], and then
press 2.
16:9
1
*
4:3 PAN
SCAN
OFF
Select this to disable the progressive scan
function.
4:3
16:9
4:3
ON
Select this to enable the progressive scan
function.
4:3 LETTER
BOX
2 Press 3/4to select a setting, and then
press ENTER/OK to confirm your
selection.
Notes on activating progressive scan:
– Ensure that your TV is equipped with
progressive scan.
– Connect using a component video
cable.
When the aspect ratio of your TV is 16:9
(widescreen):
Playback
TV display
Setting
disc
– When making HDMI connections, you
cannot select [PROGRESSIVE].
16:9
16:9
CONSUMERS SHOULD NOTE THAT NOT ALL
HIGH DEFINITION TELEVISION SETS ARE FULLY
COMPATIBLE WITH THIS PRODUCT AND MAY
CAUSE ARTIFACTS TO BE DISPLAYED IN THE
PICTURE. IN CASE OF 525 OR 625 PROGRESSIVE
SCAN PICTURE PROBLEMS, IT IS RECOMMENDED
THAT THE USER SWITCH THE CONNECTION
TO THE “STANDARD DEFINITION” OUTPUT. IF
THERE ARE QUESTIONS REGARDING OUR
VIDEO MONITOR COMPATIBILITY WITH THIS
MODEL 525P AND 625P DVD PLAYER, PLEASE
CONTACT OUR CUSTOMER SERVICE CENTER.
4:3
2
*
*1: If the disc is not assigned to playback
with panscan, it is played with
letterbox.
*2: The side of the picture may be
stretched depending on the TV. In this
case, check the screen size and aspect
ratio of your TV.
This unit is compatible with the complete line of
YAMAHA products, including the projectors
DPX-1300, DPX-830 and the plasma monitor
PDM-4220.
TIPS: To return to the previous menu, press 1.
To clear the menu, press SETUP.
28 En
Setup Menu
4 Press 3/4to select one of the following
Picture setting
options.
This unit comes with three predefined sets
of picture color settings and one personal
setting that you can define yourself.
BRIGHTNESS
Increase the value to brighten the picture
or vice versa. Zero (0) is the average
brightness setting value.
1 In “VIDEO SETUP PAGE”, press 3/4to
highlight [PICTURE SETTING], and then
press 2.
CONTRAST
Increase the value to sharpen the picture
or vice versa. Zero (0) is the average
contrast setting value.
STANDARD
Select this for the standard picture setting.
BRIGHT
Select this to make the TV picture
brighter.
TINT
Increase the value to darken the picture or
vice versa. Zero (0) is the average tint
setting value.
SOFT
Select this to make the TV picture softer.
COLOR
PERSONAL
Increase the value to enhance the color in
your picture or vice versa. Zero (0) is the
average color setting value.
Select this to personalize your picture
color by adjusting the brightness, contrast,
tint and color (saturation).
5 Press 1/ 2to adjust the setting that best
suits your personal preference.
2 Press 3/4to select a setting, and then
press ENTER/OK to confirm your
selection.
6 Repeat steps 4–5 to adjust other color
features.
3 If you select [PERSONAL] in step 1,
proceed to steps 4–7.
7 Press ENTER/OK to confirm your
selection.
➜ The “PERSONAL PICTURE SETUP”
menu appears.
Notes:
– All picture settings are not available for
HDMI output.
PERSONAL PICTURE SETUP
BRIGHTNESS
CONTRAST
TINT
0
0
0
0
COLOR
TIPS: To return to the previous menu, press 1.
To exit from the menu, press SETUP.
29 En
Setup Menu
1 In “VIDEO SETUP PAGE”, press 3/4to
highlight [CLOSED CAPTION], and then
press 2.
Selecting the black level
If you set the TV type to NTSC, set the
black level shift to ON to improve the
color contrast during playback. The black
level setting has no effect if the TV type is
set to PAL.
ON
Select this to enable the closed caption
function.
OFF
1 In “VIDEO SETUP PAGE”, press 3/4
to highlight [BLACK LEVEL], and then
press 2.
Select this to disable the closed caption
function.
2 Press 3/4to select a setting, and then
press ENTER/OK to confirm your
selection.
ON
Select this to enhance the black level.
OFF
Select this for standard black level setting.
HDMI setup
2 Press 3/4to select a setting, and then
press ENTER/OK to confirm your
selection.
When you connect this unit to an HDMI
compatible component via the HDMI jack,
select the following video output settings
depending on the connected component.
WIDE SCREEN FORMAT
Closed caption
Set the aspect ratio of the projected
images on the screen. This feature is only
available for HDMI video output.
Closed captions are data hidden in the
video signals of specific discs and are
invisible without the use of a special
decoder. The difference between subtitles
and captions is that subtitles are intended
for hearing persons and captions are for
the hearing impaired. Subtitles rarely show
all of the audio. For example, captions
show sound effects (e.g., “phone ringing”
and “footsteps”), while subtitles do not.
Before you select this function, please
ensure that the disc contains closed
caption information and your TV set also
supports this function.
SUPERWIDE
Select to display 4:3 image on the 16:9
screen with non-linear stretching (Center
position of screen is stretched less than
the side). This feature is not available when
the resolution is 480p or 570p.
4:3 PILLAR BOX
Select to display 4:3 image on the 16:9
screen without stretching.
OFF
No aspect ratio adjustment is made when
this option is selected.
TIPS: To return to the previous menu, press 1.
To exit from the menu, press SETUP.
30 En
Setup Menu
HDMI VIDEO
Enables you to adjust the resolution
depending on the monitor you are using.
Notes:
– You cannot set [TV TYPE] when making
HDMI connections.
– When disconnecting the HDMI cable, the
setting of [TV TYPE] may be changed. If
Component video, S-video and Composite
video output does not display correctly, see
“Troubleshooting” on page 38 to set the
correct TV type again.
Note:
– For settings other than [AUTO], HDMI
video output may not be display properly if
a resolution output setting is not supported
by the HDMI-compatible monitor you are
using. In that case, follow the steps below to
return to the initial setting:
1 Press OPEN/CLOSE / to open the
disc tray.
2 Press 1.
Preference setup menu
1 Press STOP (9) twice to stop playback
(if necessary), and then press SETUP.
3 Press ANGLE.
Do not perform this operation while playing
back a disc on this unit.
2 Press 1/ 2to select “PREFERENCE
PAGE”.
480P
3 Press ENTER/OK to confirm your
selection.
480 progressive-scan video
576P
576 progressive-scan video
PREFERENCE PAGE
720P
AUDIO
720 progressive-scan video
SUBTITLE
DISC MENU
PARENTAL
VR LIST
1080I
1080 interlace video
MP3/JPEG NAV
DIVX SUBTITLE
PASSWORD
AUTO
The resolution is automatically selected to
match the monitor you are using.
TIPS: To return to the previous menu, press 1.
To exit from the menu, press SETUP.
31 En
Setup Menu
2 Press 3/4to highlight a rating level for the
inserted disc, and then press ENTER/OK.
• To disable parental controls and have all
discs play, select [8 ADULT].
Audio, subtitle and disc menu
These menus contain various language
options for the audio, subtitles and disc
menus recorded on the DVD-Video. For
details, see “Setting the audio, subtitle and
disc menu languages (DVD-Video only)”
on page 13.
3 Use the numeric buttons (0-9) to enter
the six-digit password (see “Changing the
password” on page 35).
➜ DVDs that are rated above the level you
selected do not play unless you enter
your six-digit password.
Restricting playback with
parental control
Note:
– Some DVDs are not encoded with a rating
though the movie rating may be printed on
the disc cover. The rating level feature does
not work for such discs.
Some DVDs may have a parental level
assigned to the complete disc or to certain
scenes on the disc. This feature lets you set
a playback limitation level.
The rating levels are from 1 to 8 and are
country dependent. You can prohibit
playback of certain discs that are not
suitable for your children or play certain
discs in alternative scenes.
Playback of VR format
There are two ways to play back a disc in
VR (Video Recording) format: ORIGINAL
and PLAY LIST. This feature is not available
with non-VR format discs.
1 In “PREFERENCE PAGE”, press 3/4to
highlight [PARENTAL], and then press 2.
1 In “PREFERENCE PAGE”, press 3/4to
highlight [VR LIST], and then press 2.
ORIGINAL LIST
PREFERENCE PAGE
Select this to play the originally recorded
titles on the disc.
AUDIO
1 KID SAFE
2 G
SUBTITLE
DISC MENU
PARENTAL
VR LIST
3 PG
PLAY LIST
4 PG 13
5 PGR
6 R
Select this to play the edited version of the
disc. This feature is only available when a
play list has been created.
MP3/JPEG NAV
DIVX SUBTITLE
PASSWORD
7 NC 17
8 ADULT
2 Press 3/4to highlight a setting, and then
press ENTER/OK to confirm your
selection.
TIPS: To return to the previous menu, press 1.
To exit from the menu, press SETUP.
32 En
Setup Menu
To play back a disc in VR format
➜ Thumbnail pictures appear on the TV
screen.
3 Press SETUP to close the setup menu.
4 Press PLAY (B) to begin to play back the
setting you selected.
Previewing VR format
5 During playback, press SCAN.
➜ A list appears on the TV screen.
TYPE:TITLE
SELECT(01-06):- -
SELECT DIGEST TYPE:
TITLE DIGEST
EXIT
MENU
NEXT
TITLE INTERVAL
(Example of 6 thumbnails in the display)
8 Use 1/ 2/3/4 to select a title or use the
numeric buttons (0-9) to input the title
number.
6 Press 3/4to highlight either [TITLE
DIGEST] or [TITLE INTERVAL].
TITLE DIGEST
• Press S/ Tto access the
previous/next page.
This function displays thumbnail pictures of
titles on the screen. Up to six thumbnail
pictures per page are displayed.
• In ORIGINAL LIST mode, the originally
recorded titles on the disc are
displayed.
9 Press ENTER/OK to confirm the
selection.
To quit the preview function
• Use 1/ 2/3/4 to highlight [EXIT] and
press ENTER/OK.
• In PLAY LIST mode, every title in the
play list is displayed.
To return to the preview menu
• Use 1/ 2/3/4to highlight [MENU] and
press ENTER/OK.
TITLE INTERVAL
This function is used to divide and display
the contents of each title being played back
in regular intervals, making it easy to
preview the recording. Up to six thumbnail
pictures per page are displayed.
• If the title being played back is short, the
TITLE DIGEST function is performed
instead.
7 Press ENTER/OK to confirm the
selection.
TIPS: To return to the previous menu, press 1.
To exit from the menu, press SETUP.
33 En
Setup Menu
GROUP2:
MP3/JPEG menu
Albanian (sq), Croatian (hr), Czech (cs),
Hungarian (hu), Polish (pl), Romanian (ro),
Slovak (sk), Slovenian (sl)
MP3/JPEG Navigator can be set only if the
disc was recorded with a menu. It allows
you to select different display menus for
easy navigation.
GROUP3:
Bulgarian (bg), Byelorussian (be),
Macedonian (mk), Russian (ru),
Serbian (sr), Ukrainian (uk)
1 In “PREFERENCE PAGE”, press 3/4to
highlight [MP3/JPEG NAV], and then
press 2.
GROUP4:
WITHOUT MENU
Hebrew (iw), Yiddish (ji)
Select this to display all the files contained
in the MP3/Picture CD.
GROUP5:
Turkish (tr)
WITH MENU
Select this to display only the folder menu
of the MP3/Picture CD.
3 Select a group, and then press
ENTER/OK to confirm your selection.
Notes:
2 Press 3/4to select a setting, and then
press ENTER/OK to confirm your
selection.
– Some discs cannot be played depending on
disc characteristics or recording conditions.
– Some external subtitle files may be
displayed incorrectly or not at all.
– For external subtitle files, the following
subtitle format filename extensions are
supported (note that these files are not
shown within the disc navigation menu):
.srt, .sub, .ssa, .smi
– The filename of the movie file has to be
repeated at the beginning of the filename
for the external subtitle file.
– The number of external subtitle files which
can be switched for the same movie file is
limited to a maximum of 10.
Displaying DivX external subtitle
files
The font sets listed below are available for
DivX external subtitle files. This setting
allows you to see the proper font set on-
screen to match the subtitle file.
1 In “PREFERENCE PAGE”, press 3/4to
highlight [DIVX SUBTITLE], and then
press 2.
2 Press 3/4to highlight one of the following
language groups.
GROUP1:
Albanian (sq), Basque (eu), Catalan (ca),
Danish (da), Dutch (nl), English (en),
Faroese (fo), Finnish (fi), French (fr),
German (de), Icelandic (is), Irish (ga),
Italian (it), Norwegian (no),
Portuguese (pt), Rhaeto-Romanic (rm),
Scottish (gd), Spanish (es), Swedish (sv)
TIPS: To return to the previous menu, press 1.
To exit from the menu, press SETUP.
34 En
Setup Menu
4 Enter the new six-digit password.
Changing the password
5 Enter the new six-digit password again to
confirm the password.
The same password is used for both
parental control and disc lock. Enter your
six-digit password when prompted on the
screen. The default password is 000 000.
6 Press ENTER/OK to confirm your new
password.
➜ The new six-digit password is now valid.
1 In “PREFERENCE PAGE”, press 3/4to
highlight [PASSWORD], and then press 2
to select [CHANGE].
PBC (Playback control)
You can turn on or off PBC. This feature is
available only on Video CD 2.0 with the
playback control (PBC) feature. For details,
see “Playback control (PBC)” on page 18.
PREFERENCE PAGE
AUDIO
SUBTITLE
DISC MENU
PARENTAL
VR LIST
Resetting the system
Setting the DEFAULT function resets all
options and your personal settings to the
initial factory settings, except your password
for PARENTAL and DISC LOCK.
MP3/JPEG NAV
DIVX SUBTITLE
PASSWORD
CHANGE
1 In “PREFERENCE PAGE”, press 3/4to
highlight [DEFAULT], and then press 2to
select [RESET].
2 Press ENTER/OK to enter the
“Password Change Page”.
2
Press ENTER/OK to confirm your selection.
➜ All settings are reset to the initial
factory settings.
OLD PASSWORD
NEW PASSWORD
CONFIRM PWD
OK
3 Use the numeric buttons (0-9) to enter
your old six-digit password.
• When doing this for the first time, enter
“000 000”.
• If you forget your old six-digit
password, enter “000 000”.
TIPS: To return to the previous menu, press 1.
To exit from the menu, press SETUP.
35 En
Language Codes
These codes can be used to select other languages. This does not affect the options
in “AUDIO”, “SUBTITLE” or “DISC MENU”.
Abkhazian
Afar
Afrikaans
Albanian
Amharic
Arabic
Armenian
Assamese
Avestan
6566
6565
6570
8381
6577
6582
7289
6583
6569
6589
6590
6665
6985
6669
6678
6672
6673
7866
6683
6682
6671
7789
6983
6765
6772
6769
7889
7889
9072
9065
6785
6785
6786
7587
6779
7282
6783
6865
7876
6890
6978
6979
6984
7079
7074
7073
7082
7089
7168
7176
7565
German
6869
7573
6976
7178
7185
7265
7269
7290
7273
7279
7285
7383
7379
7368
7365
7369
7385
7375
7165
7384
7465
7486
7576
7578
7583
7575
7577
7573
8287
7589
7586
7579
7574
7585
7574
7679
7665
7686
7666
7673
7673
7673
7678
7684
7666
7775
7771
7783
7776
7784
7186
Gikuyu; Kikuyu
Greek,
Guarani
Gujarati
Hausa
Hebrew
Herero
Hindi
Hiri Motu
Hungarian
Icelandic
Ido
Indonesian
Interlingua (International)
Interlingue
Inuktitut
Inupiaq
Irish
Italian
Japanese
Javanese
Kalaallisut
Kannada
Kashmiri
Kazakh
Khmer
Kikuyu; Gikuyu
Kinyarwanda
Kirghiz
Komi
Korean
Kuanyama; Kwanyama
Kurdish
Aymara
Azerbaijani
Bashkir
Basque
Belarusian
Bengali
Bihari
Bislama
Bokmål, Norwegian
Bosnian
Breton
Bulgarian
Burmese
Castilian, Spanish
Catalan
Chamorro
Chechen
Chewa; Chichewa; Nyanja
Chichewa; Chewa; Nyanja
Chinese
Chuang; Zhuang
Church Slavic; Slavonic;
Church Slavonic; Church
Chuvash
Cornish
Corsican
Croatian
Czech
Danish
Dutch
Dzongkha
English
Esperanto
Estonian
Faroese
Fijian
Finnish
French
Frisian
Gaelic; Scottish Gaelic
Gallegan
Georgian
Kwanyama; Kuanyama
Lao
Latin
Latvian
Letzeburgesch;
Limburgan; Limburger;
Limburger; Limburgan;
Limburgish; Limburger;
Lingala
Lithuanian
Luxembourgish;
Macedonian
Malagasy
Malay
Malayalam
Maltese
Manx
36 En
Language Codes
These codes can be used to select other languages. This does not affect the options
in “AUDIO”, “SUBTITLE” or “DISC MENU”.
Maori
Marathi
Marshallese
Moldavian
Mongolian
Nauru
Navaho, Navajo
Navajo; Navaho
Ndebele, North
Ndebele, South
Ndonga
7773
7782
7772
7779
7778
7865
7886
7886
7868
7882
7871
7869
8369
7868
7879
Sotho, Southem
South Ndebele
Spanish; Castilian
Sundanese
Swahili
8384
7882
6983
8385
8387
8383
8386
8476
8489
8471
8465
8484
8469
8472
6679
8473
8479
8483
8478
8482
8475
8487
8571
8575
8582
8590
8673
8679
8765
6789
8779
8872
8973
8979
9065
9085
Swati
Swedish
Tagalog
Tahitian
Tajik
Tamil
Tatar
Telugu
Thai
Tibetan
Tigrinya
Tonga (Tonga Islands)
Tsonga
Tswana
Turkish
Turkmen
Twi
Uighur
Ukrainian
Urdu
Uzbek
Vietnamese
Volapük
Walloon
Welsh
Nepali
Northern Sami
North Ndebele
Norwegian
Norwegian Bokmål; Bokmål, 7866
Norwegian Nynorsk;
Nyanja; Chichewa; Chewa
Nynorsk, Norwegian;
Occitan (post 1500); Proven
7878
7889
7878
7967
Old Bulgarian; Old Slavonic; 6785
Old Church Slavonic; Old
Old Slavonic; Church
Oriya
6785
6785
7982
7977
7983
7983
8073
8065
7065
8076
8084
7967
8083
8185
8277
8279
8278
8285
8377
8371
8365
8367
7168
8382
8378
8368
8373
8375
8376
8379
Oromo
Ossetian; Ossetic
Ossetic; Ossetian
Pali
Panjabi
Persian
Polish
Portuguese
Provençal; Occitan (post)
Pushto
Wolof
Xhosa
Yiddish
Yoruba
Zhuang; Chuang
Zulu
Quechua
Raeto-Romance
Romanian
Rundi
Russian
Samoan
Sango
Sanskrit
Sardinian
Scottish Gaelic; Gaelic
Serbian
Shona
Sindhi
Sinhalese
Slovak
Slovenian
Somali
37 En
Troubleshooting
Refer to the chart below when this unit does not function properly. If the problem
you are experiencing is not listed below or if the instruction below does not help,
set this unit to the standby mode, disconnect the power cord, and contact the
nearest authorized YAMAHA dealer or service center.
Problem
Solution
No power
– Connect the AC power cord properly.
– Press STANDBY/ON on the front panel to turn on the power.
No picture
– Refer to the manual supplied with your TV for correct Video In
channel selection. Change the TV channel until you see the DVD
screen.
– Turn on your TV.
– Check the video connection.
No picture is displayed
when you make HDMI
connections (using the
HDMI jacks)
– Follow the steps below to change the [HDMI VIDEO] to [AUTO];
1. Press OPEN/CLOSE (/) on the front panel or press and hold
STOP (9) on the remote control to open the disc tray.
2. Press 1on the remote control.
3. Press ANGLE on the remote control.
No picture is displayed
when you do not use
progressive scan
connections (using the
component video jacks)
– Follow the steps below to turn off the progressive scan;
1. Press OPEN/CLOSE (/) on the front panel or press and hold
STOP (9) on the remote control to open the disc tray.
2. Press 1on the remote control.
3. Press MUTE on the remote control to deactivate progressive scan.
This unit is set to Component/Interlaced video.
Completely distorted
picture or black/white
picture or no picture
– Check that the disc is compatible with this unit (see “Notes about
discs/content format” on page 3).
– Check that the TV Type of this unit is set to match that of the disc
and your TV (see “Setting a color system for your TV” on page 11).
Follow the steps below to change the setting of [TV TYPE].
1. Press OPEN/CLOSE (/) on the front panel or press and hold
STOP (9) on the remote control to open the disc tray.
2. Press 2on the remote control.
3. Press AUDIO on the remote control.
Distorted picture
– Occasionally, a small amount of picture distortion may appear
depending on the disc being played back. This is not a malfunction.
The screen size looks
unnatural, or the caption is
displayed only partially on
the TV monitor or is not
displayed at all
– Check that the TV setting of this unit matches the screen size of your
TV (see “Setting the TV display” on page 27).
– Change the screen size and the aspect ratio of your TV.
No sound or distorted
sound
– Adjust the volume.
– Check that the speakers are connected correctly.
– For MP3/WMA files, check that the sampling rate and bit rate are compatible
with this unit (see “Notes about discs/content format” on page 3).
38 En
Troubleshooting
Problem
Solution
No audio at digital output
– Check the digital connections.
– If you are playing a DTS source, check that your receiver can decode
DTS and “DIGITAL OUTPUT” is set to “ALL” (see page 25).
– If you are playing an MPEG-2 source, check that your receiver can
decode MPEG-2. Otherwise, make sure “DIGITAL OUTPUT” is set
to “PCM ONLY” (see page 25).
– Check that the audio format of the selected audio language matches
your receiver capabilities.
Disc does not play
– The CD-R/RW, DVD+R/RW/R DL and DVD-R/RW/R DL must be
finalized.
– Check that the disc label is facing up.
– Check that the disc is defective by trying another disc.
– If you have recorded a JPEG, MP3 or WMA disc yourself, check that
your disc contains at least 10 JPEG picture files or 5 MP3/WMA music
tracks.
– For MP3/WMA files, check that the sampling rate and bit rate are
compatible. For JPEG files, check that the resolution is compatible
(see “Notes about discs/content format” on page 3).
– Check the region code (see “Region codes” on page 3).
Picture freezes
momentarily during
playback
– Check the disc for fingerprints/scratches and clean it with a soft cloth
wiping from center to edge.
This unit does not respond
to the remote control
– Aim the remote control directly at the remote control sensor on the
front panel.
– Reduce the distance of the remote control from this unit.
– Replace the batteries in the remote control.
– Reinsert the batteries with their polarities (+/– signs) as indicated.
Buttons do not work
– To completely reset this unit, unplug the AC cord from the AC outlet
for 5-10 seconds.
This unit does not respond
to some operating
– Operations may not be permitted by the disc. Refer to the
instructions of the disc jacket.
commands during playback
This unit cannot read CDs/
DVDs
– Use a commonly available CD/DVD lens cleaner to clean the lens
before sending this unit for repair.
Menu items cannot be
selected
– Press STOP (9) twice on the remote control before selecting Setup
Menu.
– Depending on the disc availability, some menu items cannot be
selected.
No sound during DivX
movies playback
– The audio code may not be supported by this unit.
39 En
Glossary
Analog: Sound that has not been turned into
numbers.Analog sound varies, while digital
sound has specific numerical values.These jacks
send audio through two channels, the left and
right.
DivX Ultra: DivX Ultra Certified products
provide enhanced playback of advanced media
features supported by the DivX Media Format.
Key features include interactive video menus,
subtitles, alternate audio tracks, video tags and
chapter points.
Aspect ratio: The ratio of vertical and
horizontal sizes of a displayed image.The
horizontal vs. vertical ratio of conventionalTVs.
is 4:3, and that of widescreens is 16:9.
DMF (DivX Media Format):The DivX Media
Format supports advanced media features,
adding controls for an interactive media
experience: interactive video menus, chapter
points, multi-language subtitles and alternate
audio tracks.
Audio output jacks: Jacks on the back of the
DVD System that send audio to another system
(TV, Stereo, etc.).
Dolby Digital: A surround sound system
Bit rate:The amount of data used to hold a given
length of music; measured in kilobits per seconds,
or kbps. Or, the speed at which you record.
developed by Dolby Laboratories containing up to
six channels of digital audio (front left and right,
surround left and right, center and subwoofer).
Generally, the higher the bit rate, or the higher the
recording speed, the better the sound quality.
However, higher bit rates use more space on a Disc.
DTS: DigitalTheatre Systems.This is a surround
sound system, but it is different from Dolby
Digital.The formats were developed by different
companies.
Chapter: Sections of a picture or a music piece
on a DVD that are smaller than titles.A title is
composed of several chapters. Each chapter is
assigned a chapter number enabling you to locate
the chapter you want.
HDMI: HDMI (High-Definition Multimedia
Interface) is the first industry-supported,
uncompressed, all-digital A/V (audio/video)
interface.Providing an interface between anyA/V
source (such as a set-top box or A/V receiver)
and an audio/video monitor (such as a digital
television - DTV), HDMI supports standard,
enhanced or high-definition video as well as
multi-channel digital audio using a single cable.
HDMI transmits all ATSC HDTV standards and
supports 8-channel digital audio, with bandwidth
to spare to accommodate future enhancements
and requirements.
When used in combination with HDCP (High-
bandwidth Digital Content Protection), HDMI
provides a secure audio/video interface that
meets the security requirements of content
providers and system operations. For further
information on HDMI, visit the HDMI website at
“www.hdmi.org/”
Component video output jacks: Jacks on the
back of the DVD System that send high-quality
video to aTV that has ComponentVideo In jacks
(R/G/B,Y/Pb/Pr, etc.).
Disc menu: A screen display prepared for
allowing selection of images, sounds, subtitles,
multi-angles, etc. recorded on a DVD.
Digital: Sound that has been converted into
numerical values. Digital sound is available when
you use the digital audio output jacks.These
jacks send audio through multiple channels,
instead of just two channels as analog does.
DivX: DivX is a popular media technology
created by DivX, Inc. DivX media files contain
highly compressed video with high visual quality
that maintains a relatively small file size. DivX files
can also include advanced media features like
menus, subtitles, and alternate audio tracks.Many
DivX media files are available for download online,
and you can create your own using your personal
content and easy-to-use tools from DivX.com.
40 En
Glossary
HDCP: HDCP (High-bandwidth Digital Content
Protection) developed by Intel corporation, is a
method to encrypt digital video and audio data
for purpose of content protection. For further
information on HDCP,visit the HDCP website at
“www.digital-cp.com”.
Play list:A list of selected titles to be played back
in a specific order.This option is only available
withVR format and must be created beforehand.
Progressive scan: It displays all the horizontal
lines of a picture at one time, as a signal frame.
This system can convert the interlaced video
from DVD into progressive format for
connection to a progressive display. It
dramatically increases the vertical resolution.
Interactive menu: Interactive video menus
offer unprecedented convenience and control so
you can quickly navigate between various scenes
or bonus features, and select from audio track
and subtitle options.
Region code: A system for allowing discs to be
played back only in the region designated
beforehand.This unit will only play discs that
have compatible region codes.You can find the
region code of your unit by looking on the
product label. Some discs are compatible with
more than one region (or ALL regions).
JPEG: A very common digital still picture
format.A still-picture data compression system
proposed by the Joint Photographic Expert
Group, which features small decrease in image
quality in spite of its high compression ratio.
MP3: A file format with a sound data
S-video: Produces a clear picture by sending
separate signals for the luminance and the color.
You can use S-video only if yourTV has S-video
input jack.
compression system.“MP3” is the abbreviation
of Motion Picture Experts Group 1 (or MPEG-1)
Audio Layer 3. By using MP3 format, one CD-R
or CD-RW can contain about 10 times as much
data volume as a regular CD can.
Surround: A system for creating realistic three
dimensional sound fields full of realism by
arranging multiple speakers around the listener.
Parental control: A function of the DVD to
limit playback of the disc by the age of the users
according to the limitation level in each country.
The limitation varies from disc to disc; when it is
activated, playback will be prohibited if the
Title:The longest section of a picture or music
feature on DVD, music, etc., in video software,
or the entire album in audio software. Each title
is assigned a title number enabling you to locate
the title you want.
software’s level is higher than the user-set level.
PCM (Pulse Code Modulation):A system for
converting analog sound signal to digital signal for
later processing, with no data compression used
in conversion.
Video output jack: Jack on the back of the
DVD System that sends video to aTV.
VR (Video Recording) format: A format
which enables you to create a DVD disc that can
be extensively re-edited.
Playback control (PBC): Refers to the signal
recorded on video CDs or SVCDs for
controlling reproduction. By using menu screens
recorded on aVideo CD or SVCD that supports
PBC, you can enjoy interactive-type software as
well as software having a search function.
41 En
Specifications
PLAYBACK SYSTEM
TV STANDARD (PAL/50 Hz) (NTSC/60 Hz)
DVD Video
Number of lines
Playback
625
525
Video CD & SVCD
CD
Multistandard
(PAL/NTSC)
PICTURE CD
CONNECTIONS
CD-R, CD-RW
HDMI
TYPE A x 1
Cinch (green)
Cinch (blue)
Cinch (red)
Mini DIN, 4 pins
Cinch
DVD+R, DVD+RW, DVD+R DL
DVD-R, DVD-RW, DVD-R DL
Y Output
PB Output
PR Output
S-Video Output
Video Output
VIDEO PERFORMANCE
Video (CVBS) Output
S-Video output
1 Vpp into 75 ohm
Y: 1 Vpp into 75 ohm
C: 0.3 Vpp into 75 ohm
Y: 1 Vpp into 75 ohm
PB PR: 0.7 Vpp into
75 ohm
Audio Output (L+R) Cinch
Digital Output
1 coaxial
IEC60958 for CDDA/LPCM
Component video output
IEC61937 for MPEG 1/2, Dolby
Digital and DTS
AUDIO FORMAT
CABINET
Digital Dolby Digital/DTS/MPEG
Compressed Digital
Dimensions (w x d x h)
Weight
435 x 310 x 51 mm
Approx. 2.6 Kg
PCM
16, 20, 24 bits
fs, 44.1, 48, 96 kHz
96, 128, 256, 320 kbps
fs, 32, 44.1, 48 kHz
64 kbps–192 kbps
fs, 44.1, 48 kHz
Stereo
POWER SUPPLY
MP3 (ISO 9660)
WMA
Power inlet
120 V, 60 Hz
Approx. 14 W
< 1 W
Power usage
Power usage standby
Analog Sound
AUDIO PERFORMANCE
DA Converter
Signal-Noise (1 kHz)
Dynamic range (1 kHz)
DVD
24 bit
105 dB
97 dB
Specifications are subject to change without
prior notice.
fs 96 kHz
2 Hz-44 kHz
2 Hz-22 kHz
2 Hz-22 kHz
2 Hz-20 kHz
2 Hz-20 kHz
0.0035%
fs 48 kHz
fs 48 kHz
fs 44.1 kHz
fs 44.1 kHz
SVCD
CD/VCD
Distortion and Noise (1 kHz)
42 En
2006
YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A.
YAMAHA CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA
YAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, GERMANY
YAMAHA ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE
YAMAHA ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD18 7GQ, ENGLAND
YAMAHA SCANDINAVIA A.B. J A WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN
YAMAHA MUSIC AUSTRALIA PTY, LTD. 17-33 MARKET ST., SOUTH MELBOURNE, 3205 VIC., AUSTRALIA
Printed in China
3139 245 22231
|