Yamaha Cell Phone HTR 6090 User Manual

YAMAHA ELECTRONICS CORPORATION, USA  
6660 Orangethorpe Avenue, Buena Park, CA 90620  
December 11, 2006  
Subject: RX-V1700 or HTR-6090 Firmware Update  
Yamaha has found that in some instances when switching between certain digital signals on an  
RX-V1700 or HTR-6090, the digital signal will mute for an extended period of time or will not return.  
Yamaha is offering a firmware update to correct this issue.  
This quick update was designed so that a user can complete the update themselves or have it completed  
by an Authorized Yamaha Service Center. Included in this document are the update instructions, as well  
as the link to download the firmware update.  
If you are not able to perform the update, please make arrangements to deliver the unit to an Authorized  
Yamaha Service Center and they will perform the update.  
Note: Executing this update will RESET AV Receiver to factory default.  
Instructions for Firmware Update:  
Step 1. Create the Firmware Update CD (Audio CD) from the downloaded content.  
2.a) To create the firmware update CD from the downloaded ZIP file, please uncompress the  
ZIP file and create an Audio CD using the included WAV file.  
2.b) If you need instructions on creating this firmware update CD, see your Personal Computer  
“PC” CD burning software instructions on how to burn a WAV file as an Audio CD.  
Step 2. Connect a CD Player or DVD  
CD / DVD* player  
Using digital connection to AV Receiver  
Player* using a digital connection  
(Coax or Optical) into any input  
(including front panel digital input) of  
the RX-V1700/HTR-6090. (*Note: In  
Optical out  
Coaxial out  
C
O
some instances a DVD Player will not  
work for this update procedure, so  
COMPONENT  
VIDEO  
VIDEO  
connecting a CD Player is preferred)  
Fig1.0 shows the rear panel of the AV  
Receiver. See owner’s manual for  
additional information on how to  
connect a CD player or DVD player  
via a Coaxial or Optical digital cable.  
L
R
HDMI  
DIGITAL INPUT  
COAXIAL  
OPTICAL  
*Some DVD Players use digital filters, which affects  
the output signal of the devices. The firmware update  
will not work with DVD Players that use these digital  
filters. CD Players usually do not use these filters so  
using a CD Player is preferred.  
2
DVD  
DVD  
5
Fig1.0  
 
Step 7. Press the PLAY button on the digitally connected CD/DVD Player to start the firmware update.  
Once the firmware update starts, it will complete automatically in approximately 4 minutes.  
7a)  
7b)  
During this time do not press any buttons on the device. DO NOT switch off or interrupt the  
AV receiver during the firmware update process!  
If an unintended failure occurs, you may start the update process again from the begining.  
Step 8. When the firmware update is complete, the AV Receiver will show “UPDATE SUCCESS” on the  
receiver display screen. At this time, turn the Yamaha AV receiver OFF by pressing the MAIN ZONE  
ON/OFF button.  
Step 9. Congratulations you have completed the firmware update. The AV receiver is ready for normal  
use.  
If you experience ongoing issues with your AV receiver, please contact an Authorized Yamaha Service  
Center or Yamaha Customer Support at (800) 292-2982 and they can assist you.  
 

Well Traveled Living Patio Heater 60405 User Manual
Weslo Home Gym WLEL36070 User Manual
Weslo Hot Tub WLHS42080 User Manual
West Marine Portable Radio VHF50 User Manual
Whirlpool Air Conditioner ACS072XE User Manual
Whirlpool Clothes Dryer ELECTRONIC GAS DRYER User Manual
Whirlpool Washer Dryer LA5570XP User Manual
Wibur Curtis Company Beverage Dispenser MCD 7G User Manual
Williams Sound Stereo Receiver PPA R35 8 User Manual
Yamaha Stereo Amplifier DG60FX 112 User Manual