Xantech Stereo System VDA51 User Manual

VDA51  
Dolby® Virtual Speaker Surround Processor  
Digital-to-Analog Converter  
INSTALLATION INSTRUCTIONS  
DESCRIPTION  
The Xantech VDA51 Dolby® Virtual Speaker Surround Processor/Digital-to-Analog Converter is designed  
to decode PCM or DOLBY DIGITAL encoded digital audio, and to output it as left and right analog line level  
audio. Thanks to its built in Dolby Virtual Speaker surround processing capability, the VDA51 is also able to  
decode any surround information that may be present in this digital audio signal. The result is lifelike  
surround audio experience from a pair of stereo speakers.  
INSTALLATION  
The VDA51 can be placed at coaxial digital output of a source unit, and its analog audio output can be  
routed to an analog pre-amp/amplifier, or to line level analog audio inputs of a multiroom system such  
as the Xantech MRC88m.  
The VDA51 can also be connected to the SPDIF output of a Xantech HDRXSG01 HD video single gang  
receiver box to provide analog audio a any zone of a multiroom system comprised of HD88C or HD44C  
HD Component Video Switcher.  
Make connections in the following order (numbered callouts correspond to the figures below):  
o Connect coaxial digital out from an audio or AV source with coaxial digital out, or from Xantech  
HDRXSG01, to VDA51 SPDIF IN (1), using a single male-to-male RCA patch cord.  
o Connect Left and Right RCA output from VDA51 (2) to a Pre-amp/Amplifier or a multiroom  
system controller’s line level input, using a dual male-to-male RCA patch cord.  
o Select WIDE or REF (these are Dolby Virtual Speaker settings), or OFF (no virtualization), using  
the VIRTUAL slide switch (3) on VDA51. Each setting will provide a different level of surround  
information and listener experience. Please note that the amount of surround effect heard can be  
dependent on the amount and type of encoding that is used during the recording process and  
may not be obvious with every listening material. Some empirical listening and experimentation  
will be necessary in choosing the desired setting.  
 

West Bend Egg Cooker 86628 User Manual
Westinghouse Flat Panel Television DWM40F1A1 User Manual
Westinghouse Outdoor Ceiling Fan ETL ES Lafayette WH09 User Manual
Whirlpool Cooktop W3CG3014XB User Manual
Whirlpool Washer 3LA5800XK User Manual
Xerox Copier 6115 User Manual
Yamaha Computer Drive CRW3200SX User Manual
Yamaha Mixer EMX5016CF User Manual
Zanussi Washer FL 1032 User Manual
Zebra Technologies Printer EM 220 User Manual