Xantech Stereo System MRCREMRP User Manual

INSTALLATION INSTRUCTIONS  
MRCREMRP  
Multi-Room Controller Hand-held Remote  
DESCRIPTION  
The MRCREMPRP (MRC Remote) is a specialized remote that is capable of interfacing with Xantech  
Multi-Room Controller products. This provides an added-value product perfect for any multi-room  
installation. The MRC Remote is designed to provide keypad control in an easy, handheld remote. In  
simple terms, it can be described as a held-held, multi-room controller keypad.  
This remote needs absolutely no programming and will trigger any keypad macro stored within the  
following Xantech products.  
MRC44CTL  
MRC88CTL  
MRAUDIO4X4CTL  
MRAUDIO8X8CTL  
BXAUDIO4X4CTL  
KEYPAD DESCRIPTIONS  
- 1 -  
 
B
A
Group Code  
Open  
Close  
Open  
Close  
Open  
Open  
Close  
Close  
08  
88  
28  
A8  
Default  
Figure A  
Programming M1, M2, M3, M4 Buttons  
To utilize the M1 thru M4 buttons, the multi-room controller must be programmed via Dragon-Drop IR  
software. The Dragon-Drop IR programming software comes with the MRC88/44 and  
MRAUDIO8X8/4X4 controllers. When the multi-room controller receives the M1, M2, M3, or M4  
command from the MRCREM, the system will output a sequence of to-be-programmed commands.  
The programming procedure is identical to placing commands on the keypad. (NOTE: The  
BXAUDIO4X4CTL cannot be programmed to respond to buttons M1, M2, M3, and M4.)  
1. Access the RC68 IR Command Macro window. Buttons M1, M2, M3, and M4 will trigger  
macros recorded under RC68 buttons F1, 99, D9, and B9 as shown in Figure B.  
2. Select the RC68+ button that’s corresponds with M1 through M4.  
3. Open the palettes or internal commands for the devices to be controlled in the sequence.  
4. Select the command that will be associated with button M1, M2, M3, or M4.  
Figure B  
- 3 -  
 
Figure B shows the Dragon-Drop IR software. Here, button “99” on the RC68 is selected. The macro  
command list shows an internal command that will set the “bass” level to preset level. In this case, the  
preset level is maximum “bass” level 14. When the multi-room controller is programmed with this  
command sequence, the MRCREM will have the capability to change a room’s audio by simply  
pressing “M2”. This is an example how the MRCREM can be used to instantly control a room’s  
environment with one simple button press.  
Additional information can be found on page 38 of the MRC44 and MRAUDIO4X4 installation  
instructions.  
Additional information can be found on page 71 of the MRC88 and MRAUDIO8X8 installation  
instructions.  
XANTECH CORPORATION  
13100 Telfair Avenue, 2/F  
Sylmar, CA 91342  
Phone 818-362-0353 Fax 818-362-9506  
Part No. 08901689 Rev A 10-06-2005  
© 2005 Xantech Corporation  
- 4 -  
 

Weil McLain Air Conditioner WMZV User Manual
Western Telematic Switch IPS 800 D20, IPS 800E D20, IPS 1600 D20, IPS 1600E D20 User Manual
Whirlpool Oven AKP620 User Manual
Whirlpool Range WFG231LV User Manual
Windster Ventilation Hood WS 208F User Manual
Winegard TV Antenna HD 5030 User Manual
Wolf Convection Oven WKEHD2 User Manual
Woods Equipment Brush Cutter MAN0680 User Manual
WorldSpace Stereo System TONGSHI User Manual
Zanussi Clothes Dryer TD183 User Manual