90 DAY LIMITED WARRANTY
Winegard Company warrants this Winegard product against any defects in materials
or workmanship within 90 (ninety) days from date of purchase. No warranty claim will be
honored unless at the time the claim is made, you present proof of purchase to an authorized
Winegard dealer (if unknown, please contact Winegard Company, 3000 Kirkwood Street,
Burlington, IA 52601-2000, Telephone 800-288-8094).
Model SS-2000 AMPLIFIED DIRECTIONAL ANTENNA
Model SS-1000 NON-AMPLIFIED DIRECTIONAL ANTENNA
Made in USA
Winegard Company (at its option) will either repair or replace the defective product at
no charge to you. This warranty covers parts, but does not cover any costs incurred in
removal, shipping or reinstallation of the product. This limited warranty does not apply if the
product is damaged, deteriorates, malfunctions or fails from: misuse, improper installation,
abuse, neglect, accident, tampering, modification of the product as originally manufactured
by Winegard, usage not in accordance with product instructions or acts of nature such as
damage caused by wind, lightning, ice or corrosive environments such as salt spray and acid
rain.
GENERAL RECEPTION GUIDELINES
ANALOG
DIGITAL
The 90 Day Warranty is provided on the condition that the equipment is properly delivered
with all handling and freight charges prepaid to your Winegard dealer for return to our factory
for repair or replacement. Winegard dealers will arrange for the replacement or repair and
return to you without charge the product which failed due to defective material or
workmanship.
UHF Ch. 14-69
0-45 miles
0-50 miles
Choose Amplified Model SS-2000 with built-in
amplifier when 25 miles or further from station
or Non-amplified Model SS-1000 for close-in.
WINEGARD COMPANY WILL NOT ASSUME ANY LIABILITIES FOR ANY OTHER
WARRANTIES, EXPRESS OR IMPLIED, MADE BY ANY OTHER PERSON.
Patent Pending
ALL OTHER WARRANTIES WHETHER EXPRESS, IMPLIED OR STATUTORY IN-
CLUDING WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE AND
MERCHANTABILITY ARE LIMITED TO THE 90-DAY PERIOD OF THIS WARRANTY.
The
directional antenna by Winegard is
The foregoing shall be the sole and exclusive remedy of any person, whether in contract,
tort or otherwise, and Winegard shall not be liable for incidental or consequential damage
or commercial loss, or from any other loss or damage except as set forth above.
designed for high definition (high resolution) digital TV. HDTV (High
Definition TV) has 10 times more picture detail than analog signals!
And the
receives these HDTV signals at
Some states do not allow limitations on how long an implied warranty lasts, or the
exclusion of limitation of incidental or consequential damages, so the above limitations or
exclusions may not apply to you.
greater distances! For example — Analog range is 45 miles; Digital
range is 50 miles.
This warranty gives you specific legal rights and you may also have other rights which vary
With HDTV, advantages include more detailed pictures, high quality
sound, plus there’s no “snow” or weak signal area with this technology.
You receive a perfect picture on your TV, or no picture at all.
from state to state.
Rev. 2/08
The
has exceptional reception character-
istics for UHF channels 14-69.
WARNING
Installation of this antenna near power lines is
dangerous. For your safety, follow these instal-
lation instructions!
Winegard Company • 3000 Kirkwood St. • Burlington, IA 52601-2000
2452031
Printed in U.S.A. © 2004 Winegard Company
Rev. 11/07
Winegard Company • 3000 Kirkwood St. • Burlington, IA 52601-2000 • 319/754-0600
8
1
AMPLIFIED MODEL SS-2000 ONLY
Attaching Downlead Cable
Antenna
Lead-in Wire
Ground Clamp
If using the Power Injector, follow these steps.
STEP 6. Attach the cable coming from your preamp or amplified
antenna to the jack on the PS-1503 Power Injector marked “Ant”.
See Figure 4.
Electrical
Service
Equipment
Antenna Discharge Unit
(NEC Section 810-21)
EXAMPLE OF ANTENNA
GROUNDING IN
ACCORDANCE WITH THE
NATIONAL ELECTRICAL CODE
INSTRUCTIONS
Grounding Conductors
(NEC Section 810-21)
STEP 7. Attach the cable from your TV set or Distribution Sys-
tem to jack on Power Injector marked “TV”. See Figure 4.
Ground Clamps
Power Service Grounding
Electrode System
(NEC Art. 250, Part N)
STEP 8. Attach supplied 6’ cable between AC Power Adapter
and jack on Power Injector marked “Pwr In”. See Figure 4.
NEC - NATIONAL ELECTRICAL CODE
19. When replacement parts are required, be sure
theservicetechnicianhasusedreplacementparts
specified by the manufacturer or have the same
characteristics as the original part. Improper sub-
stitutions may result in fire, electric shock or other
hazards.
15. Do not overload wall outlets and extension cords
as this can result in a risk of fire or electric shock.
STEP 9. Insert AC Power Adaptor into 117 VAC wall outlet.
16. Never push objects of any kind into this video
product through openings as they may touch danger-
ous voltage points or short-out parts that could result
in a fire or electric shock. Never spill liquid of any kind
on the video product.
CAUTION:
No splitters or antenna couplers should be installed in the
coax line between the antenna and the power supply.
20. Upon completion of any service or repairs to
this video product, ask the service technician to
perform safety checks to determine that the video
product is in proper operating condition.
17. Do not attempt to service this video product
yourself as opening or removing covers may expose
you to dangerous voltage or other hazards. Refer all
servicing to qualified service personnel.
21. Note to CATV system installer: This reminder
is provided to call the CATV system installer's
attention to Art. 820-40 of the NEC that provides
guidelines for proper grounding and, in particular,
specifies that the cable ground shall be connected
to the grounding system of the building, as close
to the point of cable entry as possible.
18. Unplug this video product from the wall outlet and
refer servicing to qualified service personnel under
the following conditions:
Figure 4
TO PREAMP OR
AMPLIFIED ANTENNA
a. When the power supply cord or plug is damaged.
b. If liquid has been spilled or objects have fallen into
the video product.
PS-1503
POWER
INJECTOR
22. This product should be mounted to a wall or
ceiling only as recommended by the manufac-
turer.
23. The product should be situated away from
heat sources such as radiators, heat registers,
stoves or other products (including amplifiers)
that produce heat.
c. If the video product, except for antenna mounted
preamplifiersanddownconverters, hasbeenexposed
to rain or water.
ANT.
DOWNLEAD
COAX
PS-1503
AC ADAPTOR
SUPPLIED
d. If the video product does not operate normally by
following the operating instructions. Adjust only those
controls, when provided, that are covered by the
operating instructions. An improper adjustment of
other controls may result in damage that will often
require extensive work by a qualified technician to
restore the video product to its normal operation.
TV
CABLE TO TV OR
DISTRIBUTION AMP
(SYSTEM)
POWER IN
e. If the video product has been dropped or the
housing has been damaged.
LED
6’ CABLE
SUPPLIED
f. When the video product exhibits a distinct change in
performance - this indicates a need for service.
6
3
Mounting Options
Assembly
Figure 2
Before assembly, determine the best location for HDTV signal reception.
Point antenna toward station transmitter. To find exact location
STEP 1. Connect coax cable*
(not provided) to coax con-
nection on back of antenna.
*Use RG-6/U coax cable.
• Exterior wall mount (for masonry walls, you must provide anch
• Roof mount
• Attic mount • Rail/deck mount
Another mount option is Winegard’s DS-1000 combina-
tion mount for satellite dish and Square Shooter antenna.
This configuration will meet wind specs.
STEP 2. Attach pipe and foot
at the location selected for
the antenna.
SS-2000 includes: (Amplified)
Assembled Antenna
Assembled mount pipe and foot
SS-1000 includes:
If you are mounting on a ma-
sonry surface, you must
provide your own masonry
anchors.
Assembled Antenna
Assembled mount pipe and foot
4 #12 x 5/8” plastite screws
4 #12 x 5/8” plastite screws
(attach mt. bracket to antenna)
(attach mt. bracket to antenna)
2 U-Bolts and hex nuts
4 lag bolts
Power Supply
2 U-Bolts and hex nuts
4 lag bolts
If you are mounting on a rail-
ing, for example, two U-bolts
are provided for rails, pipes,
etc. up to 2” in diameter.
Coax Connection
Figure 3
Figure 1
Swivel Clamp
Assembly
STEP 3. Attach swivel
bracket assembly to back of
antenna, using screws pro-
vided (4 #12 x 5/8). Do not
overtighten.
Antenna
(Comes
assembled)
Antenna and Mount
Assembled
STEP 4. Mount antenna on
pipe/foot assembly attached
to selected location surface.
STEP 5. Attach coax cable to
mount pipe with weatherproof
tape or cable ties.
Elevation
Bracket
Mount Pipe
Clamp
NON-AMPLIFIED MODEL
SS-1000 ONLY
Mount Bracket
STEP 6. Connect coax cable from an-
tenna to your HDTV signal or analog
signal input. The connection depends
on your TV reception system setup;
check your component manuals.
(4) #12 x 5/8” Screws
4
5
|